3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTK8BA58
SENSORTEK · Motion Sensors - Accelerometers · LGA-12(2x2)
STK8BA58 from SENSORTEK, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected. |
| 2 | SDA | bidirectional | Serial data line of the I2C interface, open-drain. |
| 3 | VDDIO | power_in | Digital interface supply voltage, I/O range 1.62V to 3.6V. |
| 4 | Reserved | input | Reserved pin, recommended to be tied to GND. |
| 5 | INT1 | output | Interrupt 1 output, configurable as push-pull or open-drain and active-high or active-low. |
| 6 | NC | unconnected | Not internally connected. |
| 7 | VS | power_in | Supply voltage, internal domain range 1.7V to 3.6V. |
| 8 | GNDIO | power_in | Digital interface ground, must be connected to ground. |
| 9 | GND | power_in | Ground, must be connected to ground. |
| 10 | NC | unconnected | Not internally connected. |
| 11 | NC | unconnected | Not internally connected. |
| 12 | SCL | input | Serial communications clock of the I2C interface, open-drain. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SENSORTEK |
| Package | LGA-12(2x2) |
| Category | Sensors |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Non-linearity | -0.5 | 0.5 | %FS | Percentage of full scale | 6 | ||
| Sensitivity change due to temperature | -0.02 | 0.02 | %/°C | X-, Y-, Z-Axes | 6 | ||
| 0 g output | -100 | 100 | mg | 0 g Output for XOUT, YOUT, ZOUT | 6 | ||
| 0 g offset change due to temperature | -1 | 1 | mg/°C | X-, Y-, Z-Axes | 6 | ||
| Supply voltage | VS | -0.3 | 3.6 | V | 7 | ||
| Digital interface supply voltage | VDDIO | -0.3 | 3.6 | V | 7 | ||
| Input voltage on any control pin | Vin | -0.3 | 3.6 | V | 7 | ||
| Acceleration (any axis, unpowered) | AUNP | 10000 | g | 7 | |||
| Operating temperature range | TOP | -40 | 85 | °C | 7 | ||
| Storage temperature range | TSTG | -40 | 125 | °C | 7 | ||
| ESD HBM | ESD | 2 | kV | HBM | 7 | ||
| ESD CDM | ESD | 500 | V | CDM | 7 | ||
| ESD MM | ESD | 200 | V | MM | 7 | ||
| Latch up | 100 | mA | Latch Up | 7 | |||
| SCL clock frequency (standard mode) | fSCLK | 10 | 100 | KHz | Standard Mode | 7 | |
| SCL clock frequency (fast mode) | fSCLK | 10 | 400 | KHz | Fast Mode | 7 | |
| Hold time after (repeated) start (standard) | tHDSTA | 4 | μs | Standard Mode | 7 | ||
| Hold time after (repeated) start (fast) | tHDSTA | 0.6 | μs | Fast Mode | 7 | ||
| LOW period of SCL (standard) | tLOW | 4.7 | μs | Standard Mode | 7 | ||
| LOW period of SCL (fast) | tLOW | 1.3 | μs | Fast Mode | 7 | ||
| HIGH period of SCL (standard) | tHIGH | 4 | μs | Standard Mode | 8 | ||
| HIGH period of SCL (fast) | tHIGH | 0.6 | μs | Fast Mode | 8 | ||
| Set-up time repeated START (standard) | tSUSTA | 4.7 | μs | Standard Mode | 8 | ||
| Set-up time repeated START (fast) | tSUSTA | 0.6 | μs | Fast Mode | 8 | ||
| Data hold time (standard) | tHDDAT | 0 | ns | Standard Mode | 8 | ||
| Data hold time (fast) | tHDDAT | 0 | ns | Fast Mode | 8 | ||
| Data set-up time (standard) | tSUDAT | 250 | ns | Standard Mode | 8 | ||
| Data set-up time (fast) | tSUDAT | 100 | ns | Fast Mode | 8 | ||
| Rise time SDA and SCL (standard) | tr | 1000 | ns | Standard Mode | 8 | ||
| Rise time SDA and SCL (fast) | tr | 300 | ns | Fast Mode | 8 | ||
| Fall time SDA and SCL (standard) | tf | 300 | ns | Standard Mode | 8 | ||
| Fall time SDA and SCL (fast) | tf | 300 | ns | Fast Mode | 8 | ||
| Set-up time for STOP (standard) | tSUSTO | 4 | μs | Standard Mode | 8 | ||
| Set-up time for STOP (fast) | tSUSTO | 0.6 | μs | Fast Mode | 8 | ||
| Bus free time STOP to START (standard) | tBUF | 4.7 | μs | Standard Mode | 8 | ||
| Bus free time STOP to START (fast) | tBUF | 1.3 | μs | Fast Mode | 8 | ||
| Cross-axis sensitivity | 1 | % | 6 | ||||
| Sensitivity ±2g | 1024 | LSB/g | ±2g, 12-bit resolution | 6 | |||
| Sensitivity ±4g | 512 | LSB/g | ±4g, 12-bit resolution | 6 | |||
| Sensitivity ±8g | 256 | LSB/g | ±8g, 12-bit resolution | 6 | |||
| Noise | 200 | μg/sqrt(Hz) | X-, Y-, Z-Axes ±2g, 12-bit resolution, Bandwidth = 1k Hz | 6 |
CAD (KiCad official)
- Symbol:
STK8BA58 - Footprint:
Package_LGA:LGA-12_2x2mm_P0.5mm - 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
- 3D model files:
stk8ba58-etched.step/stk8ba58-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stk8ba58.step/stk8ba58.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SENSORTEK datasheet (30 pp, sha256
665b6c0cd761e234, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).