Generated by kicad-footprint-generator · KiCad file format 20260206
STISO621WTR
STMicroelectronics · Digital Isolators · SO-8
STISO621WTR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply voltage side 1, recommended range 3 V to 5.5 V (Table 3). |
| 2 | RX1 | output | Receive data output side 1 with VOL maximum 0.4 V at IOH = 4 mA and VOH of VDDX - 0.3 V (Table 4). |
| 3 | TX1 | input | Transmit data input side 1 with Schmitt trigger thresholds of 0.8 V falling and 2 V rising over the full supply range (Table 4). |
| 4 | GND1 | power_in | Ground reference for side 1. |
| 5 | GND2 | power_in | Ground reference for side 2. |
| 6 | RX2 | output | Receive data output side 2 with VOL maximum 0.4 V at IOH = 4 mA and VOH of VDDX - 0.3 V (Table 4). |
| 7 | TX2 | input | Transmit data input side 2 with Schmitt trigger thresholds of 0.8 V falling and 2 V rising over the full supply range (Table 4). |
| 8 | VDD2 | power_in | Supply voltage side 2, recommended range 3 V to 5.5 V (Table 3). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Signal Isolation Devices |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (each side) | VDDX | 3 | 5.5 | V | Recommended operating conditions | 3 | |
| Logic input voltage | VIN | 0 | 5 | V | Recommended operating conditions | 3 | |
| Ambient temperature | Tamb | -40 | 125 | °C | Recommended operating conditions | 3 | |
| Supply voltage (each side) | VDDX | -0.3 | 7 | V | Absolute maximum ratings | 3 | |
| Logic input voltage | VIN | -0.3 | 7 | V | Absolute maximum ratings | 3 | |
| Output current | IO | 5 | mA | Absolute maximum ratings | 3 | ||
| Junction temperature | Tj | -40 | 150 | °C | Absolute maximum ratings | 3 | |
| VDDX on threshold | VDDXon | 2.8 | V | VDD1=VDD2=5V (Table 4); VDDX rising from 0 V | 3 | ||
| VDDX off hysteresis | VDDXhyst | 0.1 | V | VDD1=VDD2=5V (Table 4); VDDX falling from 5 V | 3 | ||
| Supply current DC | IDDX | 1.65 | 2 | mA | VDD1=VDD2=5V (Table 4); DC | 3 | |
| Supply current 10 Mbps | IDDX | 3.65 | 5 | mA | VDD1=VDD2=5V (Table 4); 10 Mbps, CL = 20 pF | 3 | |
| Supply current 100 Mbps | IDDX | 18 | 20 | mA | VDD1=VDD2=5V (Table 4); 100 Mbps, CL = 20 pF | 4 | |
| Low level Schmitt trigger threshold | VIHL | 0.8 | V | VDD1=VDD2=5V (Table 4); logic input falling, full supply range | 4 | ||
| High level Schmitt trigger threshold | VILH | 2 | V | VDD1=VDD2=5V (Table 4); logic input rising, full supply range | 4 | ||
| Schmitt trigger input hysteresis | VIHyst | 0.5 | V | VDD1=VDD2=5V (Table 4) | 4 | ||
| Low level output voltage | VOL | 0.4 | V | VDD1=VDD2=5V (Table 4); IOH = 4 mA | 4 | ||
| Output impedance tolerance | ZO | -40 | 40 | % | VDD1=VDD2=5V (Table 4); nominal 50 Ω | 4 | |
| Output impedance | ZO | 50 | Ω | VDD1=VDD2=5V (Table 4) | 4 | ||
| Maximum data rate | fMAX | 100 | Mbps | VDD1=VDD2=5V (Table 4); VIH = 5 V | 4 | ||
| Output rise time | tr | 2 | 4 | ns | VDD1=VDD2=5V (Table 4); CL = 15 pF | 4 | |
| Output fall time | tf | 2 | 4 | ns | VDD1=VDD2=5V (Table 4); CL = 15 pF | 4 | |
| Propagation delay H to L | tDHL | 25 | 42 | ns | VDD1=VDD2=5V (Table 4); see Figure 3 | 4 | |
| Propagation delay L to H | tDLH | 25 | 42 | ns | VDD1=VDD2=5V (Table 4); see Figure 3 | 4 | |
| Power-up time | tPOWUP | 30 | µs | VDD1=VDD2=5V (Table 4) | 4 | ||
| Refresh time | tREFRESH | 1 | 2 | µs | VDD1=VDD2=5V (Table 4) | 4 | |
| Watchdog timeout | tWD | 2 | 6 | µs | VDD1=VDD2=5V (Table 4) | 4 | |
| Pulse width distortion | PWD | 3 | ns | VDD1=VDD2=5V (Table 4); full temperature range /tDHL, tDLH/ | 4 | ||
| Common mode transient immunity | CMTI | 50 | 65 | kV/µs | VDD1=VDD2=5V (Table 4) | 4 | |
| VDDX on threshold | VDDXon | 2.8 | V | VDD1=VDD2=3V (Table 5); VDDX rising from 0 V | 4 | ||
| VDDX off hysteresis | VDDXhyst | 0.1 | V | VDD1=VDD2=3V (Table 5); VDDX falling from 5 V | 4 | ||
| Supply current DC | IDDX | 1.5 | 2 | mA | VDD1=VDD2=3V (Table 5); DC | 4 | |
| Supply current 10 Mbps | IDDX | 3 | 5 | mA | VDD1=VDD2=3V (Table 5); 10 Mbps, CL = 20 pF | 4 | |
| Supply current 100 Mbps | IDDX | 11 | 20 | mA | VDD1=VDD2=3V (Table 5); 100 Mbps, CL = 20 pF | 4 | |
| Low level Schmitt trigger threshold | VIHL | 0.8 | V | VDD1=VDD2=3V (Table 5); logic input falling, full supply range | 5 | ||
| High level Schmitt trigger threshold | VILH | 2 | V | VDD1=VDD2=3V (Table 5); logic input rising, full supply range | 5 | ||
| Schmitt trigger input hysteresis | VIHyst | 0.5 | V | VDD1=VDD2=3V (Table 5) | 5 | ||
| Low level output voltage | VOL | 0.4 | V | VDD1=VDD2=3V (Table 5); IOH = 4 mA | 5 | ||
| Output impedance tolerance | ZO | -40 | 40 | % | VDD1=VDD2=3V (Table 5); nominal 50 Ω | 5 | |
| Output impedance | ZO | 50 | Ω | VDD1=VDD2=3V (Table 5) | 5 | ||
| Maximum data rate | fMAX | 100 | Mbps | VDD1=VDD2=3V (Table 5); VIH = 3.3 V | 5 | ||
| Output rise time | tr | 1.5 | 4 | ns | VDD1=VDD2=3V (Table 5); CL = 15 pF | 5 | |
| Output fall time | tf | 1.5 | 4 | ns | VDD1=VDD2=3V (Table 5); CL = 15 pF | 5 | |
| Propagation delay H to L | tDHL | 25 | 42 | ns | VDD1=VDD2=3V (Table 5); see Figure 3 | 5 | |
| Propagation delay L to H | tDLH | 25 | 42 | ns | VDD1=VDD2=3V (Table 5); see Figure 3 | 5 | |
| Power-up time | tPOWUP | 30 | µs | VDD1=VDD2=3V (Table 5) | 5 | ||
| Refresh time | tREFRESH | 1 | 2 | µs | VDD1=VDD2=3V (Table 5) | 5 | |
| Watchdog timeout | tWD | 2 | 6 | µs | VDD1=VDD2=3V (Table 5) | 5 | |
| Pulse width distortion | PWD | 3 | ns | VDD1=VDD2=3V (Table 5); full temperature range /tDHL, tDLH/ | 5 | ||
| Common mode transient immunity | CMTI | 50 | 65 | kV/µs | VDD1=VDD2=3V (Table 5) | 5 |
CAD (KiCad official)
- Symbol:
STISO621WTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
stiso621wtr-etched.step/stiso621wtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stiso621wtr.step/stiso621wtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
eb02694ca421752d, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).