main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sti9287b: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sti9287b-etched.glb Publish 0.1.0 · Ray
sti9287b-etched.step sti9287b: factory component page (tier=lcsc) · Ray
sti9287b-hero.glb sti9287b: hero GLB from the etched model (keeps the MPN mark) · Ray
sti9287b-hero.overlay.json sti9287b: hero GLB from the etched model (keeps the MPN mark) · Ray
sti9287b.glb Publish 0.1.0 · Ray
sti9287b.kicad_mod Publish 0.1.0 · Ray
sti9287b.kicad_sym Publish 0.1.0 · Ray
sti9287b.lbr Publish 0.1.0 · Ray
sti9287b.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

STI9287B

TMI · LED Drivers · SOT-23-6

STI9287B from TMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Power switch output connected to the inductor as the switch node; absolute maximum SW voltage is -0.3 to 35 V.
2 GND power_in Ground pin; the datasheet requires a strong ground plane connection for heat sinking and noise protection.
3 FB input Output voltage feedback pin; the regulated feedback voltage is 196 mV min, 202 mV typical, 208 mV max, and sets LED current through R1 (I_LED = 202 mV / R1).
4 EN input Chip enable pin (EN/PWM): drive above 1.5 V to turn the part on and below 0.4 V to turn it off, and do not leave it floating; absolute maximum EN/PWM voltage is -0.3 to 25 V.
5 OVP input Over-voltage input that measures the output for open-circuit protection, to be connected to the output at the top of the LED string; OVP threshold is 30 V (rising) with 4.5 V hysteresis, and absolute maximum OVP voltage is -0.3 to 35 V.
6 IN power_in Power supply input with an operating range of 2.5 V to 7 V, which must be closely decoupled to GND with a 1 µF or greater ceramic capacitor.

Key specifications

Parameter Value
Manufacturer TMI
Package SOT-23-6
Category Nixie Tube Driver/LED Driver
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range 2.5 7 V 4
UVLO Threshold 2.4 V 4
Under Voltage Lockout Hysteresis 100 mV 4
Shutdown Current 0.1 1 µA VEN<0.4V 4
Quiescent Current 200 300 µA VFB=0.15V, No switch 4
Supply Current 0.6 1 mA VFB=0V, Switching 4
Regulated Feedback Voltage 196 202 208 mV EN/PWM is high 4
Oscillation Frequency 1 MHz 4
ON Resistance of NMOS 0.2 Ω 4
Peak Current Limit 1.2 1.4 A VIN= 4.2V, Duty cycle=50% 4
EN High-Level Input Voltage 1.5 V 4
EN Low-Level Input Voltage 0.4 V 4
EN Leakage Current -1 0.01 1 µA 4
OVP Threshold Vov 30 V Rising 4
OVP Hysteresis 4.5 V 4
Voltage Range IN 2.5 7 V 3
TJ Operating Junction Temperature Range TJ -40 125 °C 3
Input Supply voltage -0.3 8 V 2
SW, OVP voltage -0.3 35 V 2
EN/PWM voltage -0.3 25 V 2
Junction Temperature 160 °C 2
Power Dissipation 600 mW 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering, 10s) 260 °C Soldering, 10s 2
ESD Human Body Model VESD -2000 2000 V Human Body Model, JEDEC JS-001 3

CAD (KiCad official)

  • Symbol: STI9287B
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sti9287b-etched.step / sti9287b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sti9287b.step / sti9287b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TMI datasheet (12 pp, sha256 e920ee0af0dfe840, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF