component

STDS75DS2F

Public Made by Adom

by adom

STMicroelectronics Temperature Sensors, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentsensorsstds75ds2ffactory-2.0.0extractor-text

Verified STDS75DS2F

by Ray · last 5 Nov 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 1 record

5 Nov 2026RayPublished by the parts factory: tier mfr, 8 pinsfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: STDS75DS2F · MSOP-8 · 8 pins
  • ✓copper: 8 copper pads, none touching another net
  • ✓datasheet: all 8 pin names found in the 38-page datasheet
  • ✓distributor: lcsc C283289, digikey 497-6318-2-ND, mouser 511-STDS75DS2F
  • ✓family: MSOP-8_3x3mm_P0.65mm
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-s41479s7/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 8 pins = 8 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 8 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ stds75ds2f.kicad_sym✓ stds75ds2f.kicad_mod✓ stds75ds2f.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
stds75ds2f / README.md
History Download
Ray Publish 0.1.0 0528cc6 3h ago

STDS75DS2F

STMicroelectronics · Temperature Sensors · MSOP-8

STDS75DS2F from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional Serial data input/output pin for the 2-wire serial communication port; it is open drain and needs a pull-up resistor.
2 SCL input Serial clock input pin for the 2-wire serial communication port.
3 OS/INT output Open drain overlimit signal/interrupt alert output that needs a pull-up resistor and is left floating if the thermostat is not used.
4 GND power_in Ground and reference for the power supply, which must be connected to system ground.
5 A2 input Address 2 input, one of the three selectable LSBs of the I2C interface address, set to VDD or GND.
6 A1 input Address 1 input, one of the three selectable LSBs of the I2C interface address, set to VDD or GND.
7 A0 input Address 0 input, one of the three selectable LSBs of the I2C interface address, set to VDD or GND.
8 VDD power_in Supply voltage pin with a range of +2.7 V to +5.5 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package MSOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 2.7 5.5 V TA = -55 to +125 °C 30
VDD supply current, active temperature conversions IDD 125 150 µA VDD = 3.3 V 30
VDD supply current, communication only IDD 70 100 µA TA = 25 °C 30
Standby supply current, serial port inactive IDD1 1 µA TA = 25 °C 30
Temperature accuracy -2 0.5 2 °C -25 °C < TA < 100 °C; 2.7 V ≤ VDD ≤ 5.5 V 30
Temperature accuracy -3 0.5 3 °C -55 °C < TA < 125 °C; 2.7 V ≤ VDD ≤ 5.5 V 30
Conversion time tCONV 150 ms 9-bit resolution 30
Conversion time tCONV 300 ms 10-bit resolution 30
Conversion time tCONV 600 ms 11-bit resolution 30
Conversion time tCONV 1200 ms 12-bit resolution 30
OS/INT saturation voltage VOL1 0.5 V VDD = 5 V, 4 mA sink current 30
Input logic low VIL -0.45 V Digital pins 30
Output logic (SDA) VOL2 0.4 V IOL2 = 3 mA 30
Overtemperature shutdown default TOS 80 °C Default value 30
Hysteresis default THYS 75 °C Default value 30
SCL clock frequency fSCL 0 400 kHz 31
Bus free time before new transmission tBUF 1.3 µs 31
SDA and SCL fall time tF 300 ns 31
Data hold time tHD:DAT 0 µs 31
START condition hold time tHD:STA 600 ns 31
Clock high period tHIGH 600 ns 31
Clock low period tLOW 1.3 µs 31
SDA and SCL rise time tR 300 ns 31
Data setup time tSU:DAT 100 ns 31
START condition setup time tSU:STA 600 ns Only relevant for a repeated start condition 31
STOP condition setup time tSU:STO 600 ns 31
Storage temperature TSTG -60 150 °C VCC off, VBAT off 28
Lead solder temperature TSLD 260 °C Lead solder for 10 seconds 28
Supply voltage VDD 7 V 28
Output current IO 10 mA 28
Power dissipation PD 320 mW 28
Thermal resistance junction to ambient θJA 216.3 °C/W 28
Supply voltage (operating) VDD 2.7 5.5 V VDD/VBAT supply voltage 29
Ambient operating temperature TA -55 125 °C 29
Input rise and fall times 5 ns 29
Input pulse voltages 0.2 0.8 V Fraction of VCC 29
Input and output timing reference voltages 0.3 0.7 V Fraction of VCC 29

CAD (KiCad official)

  • Symbol: STDS75DS2F
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: stds75ds2f-etched.step / stds75ds2f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stds75ds2f.step / stds75ds2f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (38 pp, sha256 87a2d84df6a91e1d, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF