STC8G1K08A-36I-SOP8

{
 "schema": "adom.pads/1",
 "slug": "stc8g1k08a-36i-sop8",
 "footprint": "SOIC-8_3.9x4.9mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -1.905
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "P5.4/nRST/MCLKO/INT2/T0/T1CLKO/RxD_3/MOSI/SCL_2/ADC4/CCP2/CCP2_2",
   "type": "bidirectional",
   "description": "Standard GPIO P5.4. Alternate functions: nRST (active-low external reset input), MCLKO (master clock divided output), INT2 (external interrupt 2), T0 (timer-0 external clock input), T1CLKO (timer-1 divided clock output), UART1 RxD_3, SPI MOSI, I2C SCL_2, ADC4 analog input, and PCA CCP2/CCP2_2 capture/compare/PWM. When configured as the reset pin an internal 4k pull-up is permanently enabled; when configured as a normal IO the internal 4k pull-up is asserted for ~6.5 ms after power-up before being released.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VCC/AVCC",
   "type": "power_in",
   "description": "Main digital supply (VCC) and ADC analog supply (AVCC) combined on this pin. Place a 10 µF bulk and 0.1 µF decoupling capacitor between VCC and GND close to the device.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "P5.5/INT3/T1/T0CLKO/TxD_3/SS/SDA_2/ADC5/ECI/ECI_2/CCP2_3",
   "type": "bidirectional",
   "description": "Standard GPIO P5.5. Alternate functions: INT3 (external interrupt 3), T1 (timer-1 external clock input), T0CLKO (timer-0 divided clock output), UART1 TxD_3, SPI SS (slave select input, output when master), I2C SDA_2, ADC5 analog input, PCA ECI/ECI_2 external pulse input, and PCA CCP2_3 capture/compare/PWM. Powers up in high-impedance input mode.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GND/AGND",
   "type": "power_in",
   "description": "Combined digital ground (GND) and ADC analog ground (AGND) return.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "P3.0/RxD/INT4/ADC0",
   "type": "bidirectional",
   "description": "Standard GPIO P3.0. Alternate functions: UART1 RxD receive input, INT4 external interrupt 4, and ADC0 analog input. Powers up in weak pull-up / quasi-bidirectional mode. Do not hold P3.0, P3.1 and P3.2 low simultaneously at power-up unless entering the USB-ISP download mode.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "P3.1/TxD/ADC1/ECI_3/CCP0_2",
   "type": "bidirectional",
   "description": "Standard GPIO P3.1. Alternate functions: UART1 TxD transmit output, ADC1 analog input, PCA ECI_3 external pulse input, and PCA CCP0_2 capture/compare/PWM. Powers up in weak pull-up / quasi-bidirectional mode.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "P3.2/INT0/SCLK/SCL/RxD_2/ADC2/CCP0/CCP0_3",
   "type": "bidirectional",
   "description": "Standard GPIO P3.2. Alternate functions: INT0 external interrupt 0, SPI SCLK clock, I2C SCL clock, UART1 RxD_2, ADC2 analog input, and PCA CCP0/CCP0_3 capture/compare/PWM. Powers up in high-impedance input mode. Momentarily switches to quasi-bidirectional at power-up when P3.0 and P3.1 are both low, so the boot ROM can sample it for the USB-ISP entry decision.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "P3.3/INT1/MISO/SDA/TxD_2/ADC3/CCP1/CCP1_2/CCP1_3",
   "type": "bidirectional",
   "description": "Standard GPIO P3.3. Alternate functions: INT1 external interrupt 1, SPI MISO, I2C SDA data line, UART1 TxD_2, ADC3 analog input, and PCA CCP1/CCP1_2/CCP1_3 capture/compare/PWM. Powers up in high-impedance input mode.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}