main
Ray
Publish 0.1.0
f7d503d
STC32G8K64-42I-QFN32
STC Micro · Microcontrollers (MCU/MPU/SOC) · QFN-32-EP(4x4)
STC32G8K64-42I-QFN32 from STC Micro, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.0 | bidirectional | Standard I/O port pin, also ADC0 analog input, PWM1P capture/output, and RxD2 (UART2 receive). |
| 2 | P1.1 | bidirectional | Standard I/O port pin, also ADC1 analog input, PWM1N complementary output, and TxD2 (UART2 transmit). |
| 3 | P1.4 | bidirectional | Standard I/O port pin, also ADC4 analog input, PWM3P output, SPI MISO, USART1/USART2 SPI MISO, and I2C SDA. |
| 4 | P1.5 | bidirectional | Standard I/O port pin, also ADC5 analog input, PWM3N output, SPI SCLK, USART1/USART2 SPI clock, I2C SCL, and I2S bit clock (I2SCK_2). |
| 5 | P1.6 | bidirectional | Standard I/O port pin, also ADC6 analog input, RxD_3 (UART1 receive), PWM4P, MCLKO_2 master clock output, XTALO external crystal output, and I2S master clock outputs. |
| 6 | P1.7 | bidirectional | Standard I/O port pin, also ADC7 analog input, TxD_3 (UART1 transmit), PWM4N, PWM5_2, and XTALI external crystal/clock input. |
| 7 | P1.3 | bidirectional | Standard I/O port pin, also ADC3 analog input, SPI MOSI, USART1/USART2 SPI MOSI, PWM2N complementary output, T2CLKO timer 2 clock output, and I2S data (I2SSD_2). |
| 8 | P1.2 | bidirectional | Standard I/O port pin, also PWM2P output, SPI SS, USART1/USART2 SPI SS, and T2 external timer 2 clock input; this package has no UCAP pin at this position. |
| 9 | P5.4 | bidirectional | Standard I/O port pin by default; can be set by ISP as active-low nRST reset input, also ADC2 input and MCLKO clock output, and its internal 4K pull-up stays on about 6.5 ms after power-up when used as I/O. |
| 10 | Vcc/AVcc | power_in | Main supply pin for the MCU (Vcc) and the ADC supply (AVcc); the feature table specifies 1.9 V to 5.5 V operation. |
| 11 | ADC_VRef+ | power_in | ADC external reference voltage pin, which must be connected to an external reference from 2.4 V up to MCU-VCC because floating causes leakage current. |
| 12 | Gnd/AGnd | power_in | Ground pin for the digital circuitry (Gnd) and the ADC analog ground (AGnd). |
| 13 | P3.0 | bidirectional | Standard I/O port pin (quasi-bidirectional after power-up), also UART1 receive RxD and external interrupt INT4; P3.0, P3.1 and P3.2 must not all be low at power-up unless USB ISP entry is wanted. |
| 14 | P3.1 | bidirectional | Standard I/O port pin (quasi-bidirectional after power-up), also UART1 transmit TxD; P3.0/P3.1 form the ISP download and emulation interface. |
| 15 | P3.2 | bidirectional | Standard I/O port pin, also external interrupt INT0, SPI SCLK_4, I2C SCL_4, PWM external trigger inputs PWMETI/PWMETI2, and I2S clock I2SCK; it is used for the ISP mode check at power-up. |
| 16 | P3.3 | bidirectional | Standard I/O port pin, also external interrupt INT1, SPI MISO_4, I2C SDA_4, PWM4N_4 complementary output, and PWM7_2. |
| 17 | P3.4 | bidirectional | Standard I/O port pin, also Timer 0 external clock input T0, T1CLKO timer 1 clock output, SPI MOSI_4, PWM4P_4, PWM8_2, comparator output CMPO, and I2S data (I2SSD). |
| 18 | P3.5 | bidirectional | Standard I/O port pin, also Timer 1 external clock input T1, T0CLKO timer 0 clock output, SPI SS_4, PWM external fault input PWMFLT/PWMFLT2, and I2S word select (I2SWS). |
| 19 | P3.6 | bidirectional | Standard I/O port pin, also external interrupt INT2, UART1 alternate receive RxD_2, and comparator negative input CMP-. |
| 20 | P3.7 | bidirectional | Standard I/O port pin, also external interrupt INT3, UART2 alternate transmit TxD_2, and comparator positive input CMP+. |
| 21 | P2.0 | bidirectional | Standard I/O port pin, also external address bus A8, PWM1P_2 capture/output, and PWM5 output. |
| 22 | P2.1 | bidirectional | Standard I/O port pin, also external address bus A9, PWM1N_2 complementary output, and PWM6 output. |
| 23 | P2.2 | bidirectional | Standard I/O port pin, also external address bus A10, PWM2P_2, PWM7, SPI SS_2, USART1/USART2 SPI SS, and I2S word select (I2SWS_3). |
| 24 | P2.3 | bidirectional | Standard I/O port pin, also external address bus A11, PWM2N_2, PWM8, SPI MOSI_2, USART1/USART2 SPI MOSI, and I2S data (I2SSD_3). |
| 25 | P2.4 | bidirectional | Standard I/O port pin, also external address bus A12, PWM3P_2, SPI MISO_2, USART1/USART2 SPI MISO, and I2C SDA_2. |
| 26 | P2.5 | bidirectional | Standard I/O port pin, also external address bus A13, PWM3N_2, SPI SCLK_2, USART1/USART2 SPI clock, I2C SCL_2, and I2S bit clock (I2SCK_3). |
| 27 | P2.6 | bidirectional | Standard I/O port pin, also external address bus A14 and PWM4P_2 capture/output. |
| 28 | P2.7 | bidirectional | Standard I/O port pin, also external address bus A15 and PWM4N_2 complementary output. |
| 29 | P0.0 | bidirectional | Standard I/O port pin, also address/data bus AD0, ADC8 analog input, UART3 receive RxD3, PWM5_3, Timer 3 external input T3_2, and CAN receive CAN_RX. |
| 30 | P0.1 | bidirectional | Standard I/O port pin, also address/data bus AD1, ADC9 analog input, UART3 transmit TxD3, PWM6_3, T3CLKO_2 timer 3 clock output, and CAN transmit CAN_TX. |
| 31 | P0.2 | bidirectional | Standard I/O port pin, also address/data bus AD2, ADC10 analog input, UART4 receive RxD4, PWM7_3, Timer 4 external input T4_2, CAN2_RX, and LIN_RX. |
| 32 | P0.3 | bidirectional | Standard I/O port pin, also address/data bus AD3, ADC11 analog input, UART4 transmit TxD4, PWM8_3, T4CLKO_2 timer 4 clock output, CAN2_TX, and LIN_TX. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | QFN-32-EP(4x4) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作温度 | -40 | 85 | ℃ | 使用内部高速 IRC 和外部晶振 | 1656 | ||
| 工作温度 | -40 | 125 | ℃ | 1656 | |||
| 工作电压 | 1.9 | 5.5 | V | 工作温度低于-40℃时,工作电压不得低于 3.0V | 1656 | ||
| VDD 对地电压 | VDD | -0.3 | 5.5 | V | 1656 | ||
| I/O 口对地电压 | -0.3 | V | 1656 | ||||
| 存储温度 | -55 | 155 | ℃ | 1656 | |||
| 内部 IRC 温漂 (-20℃~65℃) | -0.88 | 1.05 | % | -20℃~65℃,参考温度 25℃ | 1656 | ||
| 内部 IRC 温漂 (-40℃~85℃) | -1.38 | 1.42 | % | -40℃~85℃,参考温度 25℃ | 1656 | ||
| 内部 IRC 温漂 (-40℃~125℃) | -3 | 3 | % | -40℃~125℃,参考温度 25℃ | 1656 | ||
| 输入高电平(普通 I/O) | VIH1 | 1.6 | V | VDD=5.0V, 25℃; 打开施密特触发 | 1657 | ||
| 输入高电平(普通 I/O) | VIH1 | 1.54 | V | VDD=5.0V, 25℃; 关闭施密特触发 | 1657 | ||
| 输入低电平 | VIL1 | 1.32 | V | VDD=5.0V, 25℃; 打开施密特触发 | 1657 | ||
| 输入低电平 | VIL1 | 1.48 | V | VDD=5.0V, 25℃; 关闭施密特触发 | 1657 | ||
| 逻辑 0 输入电流 | IIL | 50 | uA | VDD=5.0V, 25℃; 端口电压 0V | 1657 | ||
| 逻辑 1 到 0 的转移电流 | ITL | 100 | 270 | 600 | uA | VDD=5.0V, 25℃; 端口电压 2.0V | 1657 |
| I/O 口上拉电阻 | RPU | 4.1 | 4.2 | 4.4 | KΩ | VDD=5.0V, 25℃ | 1657 |
| 普通工作模式电流 | ICC | 4 | 20 | mA | VDD=5.0V, 25℃ | 1657 |
CAD (KiCad official)
- Symbol:
STC32G8K64-42I-QFN32 - Footprint:
Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm - 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
stc32g8k64-42i-qfn32-etched.step/stc32g8k64-42i-qfn32-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc32g8k64-42i-qfn32.step/stc32g8k64-42i-qfn32.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1887 pp, sha256
59bba1d366cc8d33, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STC32G8K64-42I-QFN32
**STC Micro** · Microcontrollers (MCU/MPU/SOC) · QFN-32-EP(4x4)
STC32G8K64-42I-QFN32 from STC Micro, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.0 | bidirectional | Standard I/O port pin, also ADC0 analog input, PWM1P capture/output, and RxD2 (UART2 receive). |
| 2 | P1.1 | bidirectional | Standard I/O port pin, also ADC1 analog input, PWM1N complementary output, and TxD2 (UART2 transmit). |
| 3 | P1.4 | bidirectional | Standard I/O port pin, also ADC4 analog input, PWM3P output, SPI MISO, USART1/USART2 SPI MISO, and I2C SDA. |
| 4 | P1.5 | bidirectional | Standard I/O port pin, also ADC5 analog input, PWM3N output, SPI SCLK, USART1/USART2 SPI clock, I2C SCL, and I2S bit clock (I2SCK_2). |
| 5 | P1.6 | bidirectional | Standard I/O port pin, also ADC6 analog input, RxD_3 (UART1 receive), PWM4P, MCLKO_2 master clock output, XTALO external crystal output, and I2S master clock outputs. |
| 6 | P1.7 | bidirectional | Standard I/O port pin, also ADC7 analog input, TxD_3 (UART1 transmit), PWM4N, PWM5_2, and XTALI external crystal/clock input. |
| 7 | P1.3 | bidirectional | Standard I/O port pin, also ADC3 analog input, SPI MOSI, USART1/USART2 SPI MOSI, PWM2N complementary output, T2CLKO timer 2 clock output, and I2S data (I2SSD_2). |
| 8 | P1.2 | bidirectional | Standard I/O port pin, also PWM2P output, SPI SS, USART1/USART2 SPI SS, and T2 external timer 2 clock input; this package has no UCAP pin at this position. |
| 9 | P5.4 | bidirectional | Standard I/O port pin by default; can be set by ISP as active-low nRST reset input, also ADC2 input and MCLKO clock output, and its internal 4K pull-up stays on about 6.5 ms after power-up when used as I/O. |
| 10 | Vcc/AVcc | power_in | Main supply pin for the MCU (Vcc) and the ADC supply (AVcc); the feature table specifies 1.9 V to 5.5 V operation. |
| 11 | ADC_VRef+ | power_in | ADC external reference voltage pin, which must be connected to an external reference from 2.4 V up to MCU-VCC because floating causes leakage current. |
| 12 | Gnd/AGnd | power_in | Ground pin for the digital circuitry (Gnd) and the ADC analog ground (AGnd). |
| 13 | P3.0 | bidirectional | Standard I/O port pin (quasi-bidirectional after power-up), also UART1 receive RxD and external interrupt INT4; P3.0, P3.1 and P3.2 must not all be low at power-up unless USB ISP entry is wanted. |
| 14 | P3.1 | bidirectional | Standard I/O port pin (quasi-bidirectional after power-up), also UART1 transmit TxD; P3.0/P3.1 form the ISP download and emulation interface. |
| 15 | P3.2 | bidirectional | Standard I/O port pin, also external interrupt INT0, SPI SCLK_4, I2C SCL_4, PWM external trigger inputs PWMETI/PWMETI2, and I2S clock I2SCK; it is used for the ISP mode check at power-up. |
| 16 | P3.3 | bidirectional | Standard I/O port pin, also external interrupt INT1, SPI MISO_4, I2C SDA_4, PWM4N_4 complementary output, and PWM7_2. |
| 17 | P3.4 | bidirectional | Standard I/O port pin, also Timer 0 external clock input T0, T1CLKO timer 1 clock output, SPI MOSI_4, PWM4P_4, PWM8_2, comparator output CMPO, and I2S data (I2SSD). |
| 18 | P3.5 | bidirectional | Standard I/O port pin, also Timer 1 external clock input T1, T0CLKO timer 0 clock output, SPI SS_4, PWM external fault input PWMFLT/PWMFLT2, and I2S word select (I2SWS). |
| 19 | P3.6 | bidirectional | Standard I/O port pin, also external interrupt INT2, UART1 alternate receive RxD_2, and comparator negative input CMP-. |
| 20 | P3.7 | bidirectional | Standard I/O port pin, also external interrupt INT3, UART2 alternate transmit TxD_2, and comparator positive input CMP+. |
| 21 | P2.0 | bidirectional | Standard I/O port pin, also external address bus A8, PWM1P_2 capture/output, and PWM5 output. |
| 22 | P2.1 | bidirectional | Standard I/O port pin, also external address bus A9, PWM1N_2 complementary output, and PWM6 output. |
| 23 | P2.2 | bidirectional | Standard I/O port pin, also external address bus A10, PWM2P_2, PWM7, SPI SS_2, USART1/USART2 SPI SS, and I2S word select (I2SWS_3). |
| 24 | P2.3 | bidirectional | Standard I/O port pin, also external address bus A11, PWM2N_2, PWM8, SPI MOSI_2, USART1/USART2 SPI MOSI, and I2S data (I2SSD_3). |
| 25 | P2.4 | bidirectional | Standard I/O port pin, also external address bus A12, PWM3P_2, SPI MISO_2, USART1/USART2 SPI MISO, and I2C SDA_2. |
| 26 | P2.5 | bidirectional | Standard I/O port pin, also external address bus A13, PWM3N_2, SPI SCLK_2, USART1/USART2 SPI clock, I2C SCL_2, and I2S bit clock (I2SCK_3). |
| 27 | P2.6 | bidirectional | Standard I/O port pin, also external address bus A14 and PWM4P_2 capture/output. |
| 28 | P2.7 | bidirectional | Standard I/O port pin, also external address bus A15 and PWM4N_2 complementary output. |
| 29 | P0.0 | bidirectional | Standard I/O port pin, also address/data bus AD0, ADC8 analog input, UART3 receive RxD3, PWM5_3, Timer 3 external input T3_2, and CAN receive CAN_RX. |
| 30 | P0.1 | bidirectional | Standard I/O port pin, also address/data bus AD1, ADC9 analog input, UART3 transmit TxD3, PWM6_3, T3CLKO_2 timer 3 clock output, and CAN transmit CAN_TX. |
| 31 | P0.2 | bidirectional | Standard I/O port pin, also address/data bus AD2, ADC10 analog input, UART4 receive RxD4, PWM7_3, Timer 4 external input T4_2, CAN2_RX, and LIN_RX. |
| 32 | P0.3 | bidirectional | Standard I/O port pin, also address/data bus AD3, ADC11 analog input, UART4 transmit TxD4, PWM8_3, T4CLKO_2 timer 4 clock output, CAN2_TX, and LIN_TX. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | QFN-32-EP(4x4) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作温度 | | -40 | | 85 | ℃ | 使用内部高速 IRC 和外部晶振 | 1656 |
| 工作温度 | | -40 | | 125 | ℃ | | 1656 |
| 工作电压 | | 1.9 | | 5.5 | V | 工作温度低于-40℃时,工作电压不得低于 3.0V | 1656 |
| VDD 对地电压 | VDD | -0.3 | | 5.5 | V | | 1656 |
| I/O 口对地电压 | | -0.3 | | | V | | 1656 |
| 存储温度 | | -55 | | 155 | ℃ | | 1656 |
| 内部 IRC 温漂 (-20℃~65℃) | | -0.88 | | 1.05 | % | -20℃~65℃,参考温度 25℃ | 1656 |
| 内部 IRC 温漂 (-40℃~85℃) | | -1.38 | | 1.42 | % | -40℃~85℃,参考温度 25℃ | 1656 |
| 内部 IRC 温漂 (-40℃~125℃) | | -3 | | 3 | % | -40℃~125℃,参考温度 25℃ | 1656 |
| 输入高电平(普通 I/O) | VIH1 | 1.6 | | | V | VDD=5.0V, 25℃; 打开施密特触发 | 1657 |
| 输入高电平(普通 I/O) | VIH1 | 1.54 | | | V | VDD=5.0V, 25℃; 关闭施密特触发 | 1657 |
| 输入低电平 | VIL1 | | | 1.32 | V | VDD=5.0V, 25℃; 打开施密特触发 | 1657 |
| 输入低电平 | VIL1 | | | 1.48 | V | VDD=5.0V, 25℃; 关闭施密特触发 | 1657 |
| 逻辑 0 输入电流 | IIL | | | 50 | uA | VDD=5.0V, 25℃; 端口电压 0V | 1657 |
| 逻辑 1 到 0 的转移电流 | ITL | 100 | 270 | 600 | uA | VDD=5.0V, 25℃; 端口电压 2.0V | 1657 |
| I/O 口上拉电阻 | RPU | 4.1 | 4.2 | 4.4 | KΩ | VDD=5.0V, 25℃ | 1657 |
| 普通工作模式电流 | ICC | | 4 | 20 | mA | VDD=5.0V, 25℃ | 1657 |
## CAD (KiCad official)
- Symbol: `STC32G8K64-42I-QFN32`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`
- 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `stc32g8k64-42i-qfn32-etched.step` / `stc32g8k64-42i-qfn32-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stc32g8k64-42i-qfn32.step` / `stc32g8k64-42i-qfn32.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STC Micro datasheet](docs/stc32g8k64-42i-qfn32-datasheet.pdf) (1887 pp, sha256 `59bba1d366cc8d33`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stc32g8k64-42i-qfn32-datasheet.pdf)