Generated by kicad-footprint-generator · KiCad file format 20260206
STC15W4K48S4-30I-LQFP48
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
STC15W4K48S4-30I-LQFP48 from STC Micro, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TxD4_2/P5.3 | bidirectional | Standard quasi-bidirectional I/O P5.3 (PORT5[3]); alternate TxD4_2 is the UART4 transmit data output, selected via S4_S in P_SW2. |
| 2 | PWMFLT_2/T3/AD5/P0.5 | bidirectional | Standard I/O P0.5 (PORT0[5]); alternate AD5 address/data bus bit, T3 timer/counter 3 external input, and PWMFLT_2 PWM fault-stop control input. |
| 3 | PWM7_2/T4CLKO/AD6/P0.6 | bidirectional | Standard I/O P0.6 (PORT0[6]); alternate AD6 address/data bus bit, T4CLKO timer 4 clock output (enabled via T4T3M[4]), and PWM7_2 output channel 7, which is high-impedance after power-on and must be configured before use. |
| 4 | PWM6_2/AD7/P0.7 | bidirectional | Standard I/O P0.7 (PORT0[7]); alternate AD7 address/data bus bit, T4 timer/counter 4 external input, and PWM6_2 output channel 6, which is high-impedance after power-on and needs a pull-up if used in power-down mode. |
| 5 | RxD2/CCP1/ADC0/P1.0 | bidirectional | Standard I/O P1.0 (PORT1[0]); alternate ADC0 analog input channel 0, CCP1 capture/PWM channel 1, and RxD2 UART2 receive data input. |
| 6 | TxD2/CCP0/ADC1/P1.1 | bidirectional | Standard I/O P1.1 (PORT1[1]); alternate ADC1 analog input channel 1, CCP0 capture/PWM channel 0, and TxD2 UART2 transmit data output. |
| 7 | TxD2_2/P4.7 | bidirectional | Standard I/O P4.7 (PORT4[7]); alternate TxD2_2 UART2 transmit data output when S2_S selects this pin. |
| 8 | CMPO/ECI/SS/ADC2/P1.2 | bidirectional | Standard I/O P1.2 (PORT1[2]); alternate ADC2 input channel 2, CMPO comparator output, ECI CCP/PCA external count input, and SS SPI slave select. |
| 9 | MOSI/ADC3/P1.3 | bidirectional | Standard I/O P1.3 (PORT1[3]); alternate ADC3 analog input channel 3 and MOSI SPI master-out/slave-in data line. |
| 10 | MISO/ADC4/P1.4 | bidirectional | Standard I/O P1.4 (PORT1[4]); alternate ADC4 analog input channel 4 and MISO SPI master-in/slave-out data line. |
| 11 | SCLK/ADC5/P1.5 | bidirectional | Standard I/O P1.5 (PORT1[5]); alternate ADC5 analog input channel 5 and SCLK SPI serial clock. |
| 12 | PWM6/SysClkO_2/XTAL2/RxD_3/ADC6/P1.6 | bidirectional | Standard I/O P1.6 (PORT1[6]); alternate ADC6 input channel 6, RxD_3 UART1 receive, SysClkO_2 system clock output, XTAL2 crystal output, and PWM6 channel 6, which is high-impedance after power-on. |
| 13 | P1.7/ADC7/TxD_3/XTAL1/PWM7 | bidirectional | Standard I/O P1.7 (PORT1[7]); alternate ADC7 input channel 7, TxD_3 UART1 transmit, XTAL1 crystal/external clock input, and PWM7 channel 7, which is high-impedance after power-on. |
| 14 | P5.4/RST/SysClkO/SS_3/CMP- | bidirectional | Standard I/O P5.4 (PORT5[4]); RST is the active-high reset input, and alternate functions are SysClkO system clock output, SS_3 SPI slave select, and CMP- comparator negative input, which must be set high-impedance when used as CMP-. |
| 15 | Vcc | power_in | Positive power supply; the datasheet specifies an operating voltage of 2.5V to 5.5V. |
| 16 | P5.5/CMP+ | bidirectional | Standard I/O P5.5 (PORT5[5]); alternate CMP+ comparator positive input, which must be set high-impedance when used as CMP+. |
| 17 | Gnd | power_in | Power supply ground. |
| 18 | P4.0/MOSI_3 | bidirectional | Standard I/O P4.0 (PORT4[0]); alternate MOSI_3 SPI master-out/slave-in data line, selected via SPI_S1/SPI_S0. |
| 19 | P3.0/RxD/INT4/T2CLKO | bidirectional | Standard I/O P3.0 (PORT3[0]); alternate RxD UART1 receive (default), INT4 falling-edge-only external interrupt with power-down wake-up, and T2CLKO timer 2 clock output. |
| 20 | P3.1/TxD/T2 | bidirectional | Standard I/O P3.1 (PORT3[1]); alternate TxD UART1 transmit (default) and T2 timer/counter 2 external input. |
| 21 | P3.2/INT0 | bidirectional | Standard I/O P3.2 (PORT3[2]); alternate INT0 external interrupt 0, which is rising/falling-edge selectable by IT0 and supports power-down wake-up. |
| 22 | P3.3/INT1 | bidirectional | Standard I/O P3.3 (PORT3[3]); alternate INT1 external interrupt 1, which is rising/falling-edge selectable by IT1 and supports power-down wake-up. |
| 23 | P3.4/T0/T1CLKO/ECI_2 | bidirectional | Standard I/O P3.4 (PORT3[4]); alternate T0 timer 0 external input, T1CLKO timer 1 clock output (INT_CLKO[1]), and ECI_2 CCP/PCA external count input. |
| 24 | P5.0/RxD3_2 | bidirectional | Standard I/O P5.0 (PORT5[0]); alternate RxD3_2 UART3 receive data input when S3_S selects this pin. |
| 25 | P5.1/TxD3_2 | bidirectional | Standard I/O P5.1 (PORT5[1]); alternate TxD3_2 UART3 transmit data output when S3_S selects this pin. |
| 26 | P3.5/T1/T0CLKO/CCP0_2 | bidirectional | Standard I/O P3.5 (PORT3[5]); alternate T1 timer 1 external input, T0CLKO timer 0 clock output (INT_CLKO[0]), and CCP0_2 capture/PWM channel 0. |
| 27 | P3.6/INT2/RxD_2/CCP1_2 | bidirectional | Standard I/O P3.6 (PORT3[6]); alternate INT2 falling-edge-only external interrupt with power-down wake-up, RxD_2 UART1 alternate receive, and CCP1_2 capture/PWM channel 1. |
| 28 | P3.7/INT3/TxD_2/PWM2 | bidirectional | Standard I/O P3.7 (PORT3[7]); alternate INT3 falling-edge-only external interrupt with power-down wake-up, TxD_2 UART1 alternate transmit, and PWM2 channel 2, which is high-impedance after power-on. |
| 29 | P4.1/MISO_3 | bidirectional | Standard I/O P4.1 (PORT4[1]); alternate MISO_3 SPI master-in/slave-out data line. |
| 30 | P4.2/WR/PWM5_2 | bidirectional | Standard I/O P4.2 (PORT4[2]); alternate WR external data memory write strobe and PWM5_2 output channel 5, which is high-impedance after power-on. |
| 31 | P4.3/SCLK_3 | bidirectional | Standard I/O P4.3 (PORT4[3]); alternate SCLK_3 SPI serial clock. |
| 32 | P4.4/RD/PWM4_2 | bidirectional | Standard I/O P4.4 (PORT4[4]); alternate RD external data memory read strobe and PWM4_2 output channel 4, which is high-impedance after power-on. |
| 33 | P2.0/A8 | bidirectional | Standard I/O P2.0 (PORT2[0]); alternate A8 address bus bit 8 and RSTOUT_LOW, which outputs low after power-on and during reset. |
| 34 | P2.1/A9/SCLK_2/PWM3 | bidirectional | Standard I/O P2.1 (PORT2[1]); alternate A9 address bus bit 9, SCLK_2 SPI serial clock, and PWM3 channel 3, which is high-impedance after power-on. |
| 35 | P2.2/A10/MISO_2/PWM4 | bidirectional | Standard I/O P2.2 (PORT2[2]); alternate A10 address bus bit 10, MISO_2 SPI master-in/slave-out, and PWM4 channel 4, which is high-impedance after power-on. |
| 36 | P2.3/A11/MOSI_2/PWM5 | bidirectional | Standard I/O P2.3 (PORT2[3]); alternate A11 address bus bit 11, MOSI_2 SPI master-out/slave-in, and PWM5 channel 5, which is high-impedance after power-on. |
| 37 | PWMFLT/SS_2/ECI_3/A12/P2.4 | bidirectional | Standard I/O P2.4 (PORT2[4]); alternate A12 address bus bit 12, ECI_3 CCP/PCA external count input, SS_2 SPI slave select, and PWMFLT PWM fault-stop control input. |
| 38 | CCP0_3/A13/P2.5 | bidirectional | Standard I/O P2.5 (PORT2[5]); alternate A13 address bus bit 13 and CCP0_3 capture/PWM channel 0. |
| 39 | CCP1_3/A14/P2.6 | bidirectional | Standard I/O P2.6 (PORT2[6]); alternate A14 address bus bit 14 and CCP1_3 capture/PWM channel 1. |
| 40 | PWM2_2/A15/P2.7 | bidirectional | Standard I/O P2.7 (PORT2[7]); alternate A15 address bus bit 15 and PWM2_2 channel 2 per the pinout diagram (the pin table lists CCP2_3), which is high-impedance after power-on. |
| 41 | PWM3_2/ALE/P4.5 | bidirectional | Standard I/O P4.5 (PORT4[5]); alternate ALE address latch enable output and PWM3_2 channel 3, which is high-impedance after power-on. |
| 42 | RxD2_2/P4.6 | bidirectional | Standard I/O P4.6 (PORT4[6]); alternate RxD2_2 UART2 receive data input when S2_S selects this pin. |
| 43 | RxD3/AD0/P0.0 | bidirectional | Standard I/O P0.0 (PORT0[0]); alternate AD0 address/data bus bit 0 and RxD3 UART3 receive data input. |
| 44 | TxD3/AD1/P0.1 | bidirectional | Standard I/O P0.1 (PORT0[1]); alternate AD1 address/data bus bit 1 and TxD3 UART3 transmit data output. |
| 45 | RxD4/AD2/P0.2 | bidirectional | Standard I/O P0.2 (PORT0[2]); alternate AD2 address/data bus bit 2 and RxD4 UART4 receive data input. |
| 46 | TxD4/AD3/P0.3 | bidirectional | Standard I/O P0.3 (PORT0[3]); alternate AD3 address/data bus bit 3 and TxD4 UART4 transmit data output. |
| 47 | T3CLKO/AD4/P0.4 | bidirectional | Standard I/O P0.4 (PORT0[4]); alternate AD4 address/data bus bit 4 and T3CLKO timer 3 clock output (enabled via T4T3M[0]). |
| 48 | RxD4_2/P5.2 | bidirectional | Standard I/O P5.2 (PORT5[2]); alternate RxD4_2 UART4 receive data input when S4_S selects this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -55 | 125 | ℃ | 1184 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1184 | ||
| DC power supply (5V) | VDD - VSS | -0.3 | 5.5 | V | 1184 | ||
| DC power supply (3V) | VDD - VSS | -0.3 | 3.6 | V | 1184 | ||
| Voltage on any pin | -0.3 | V | 1184 | ||||
| VDD Operating Voltage (5V MCU) | VDD | 3.3 | 5 | 5.5 | V | 1184 | |
| VDD Operating Voltage (3V MCU) | VDD | 2.4 | 3.3 | 3.6 | V | 1184 | |
| Input Low (P0,P1,P2,P3) (5V MCU) | VIL1 | 0.8 | V | 5V | 1184 | ||
| Input High (P0,P1,P2,P3) (5V MCU) | VIH1 | 2 | V | 5V | 1184 | ||
| Input High (RESET) (5V MCU) | VIH2 | 2.2 | V | 5V | 1184 | ||
| Operating Current (5V MCU) | ICC | 4 | 20 | mA | 5V | 1184 | |
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) (5V MCU) | IOH1 | 200 | 270 | uA | 5V | 1184 | |
| Logic 0 input current (P0,P1,P2,P3) (5V MCU) | IIL | 50 | uA | Vpin=0V | 1184 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) (5V MCU) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 1184 |
| Input Low (P0,P1,P2,P3) (3V MCU) | VIL1 | 0.8 | V | 3.3V | 1184 | ||
| Input High (P0,P1,P2,P3) (3V MCU) | VIH1 | 2 | V | 3.3V | 1184 | ||
| Input High (RESET) (3V MCU) | VIH2 | 2.2 | V | 3.3V | 1184 | ||
| Operating Current (3V MCU) | ICC | 4 | 10 | mA | 3.3V | 1184 | |
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) (3V MCU) | IOH1 | 140 | 170 | uA | 3.3V | 1184 | |
| Logic 0 input current (P0,P1,P2,P3) (3V MCU) | IIL | 8 | 50 | uA | Vpin=0V | 1184 | |
| Logic 1 to 0 transition current (P0,P1,P2,P3) (3V MCU) | ITL | 110 | 600 | uA | Vpin=2.0V | 1184 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following | 441 |
CAD (KiCad official)
- Symbol:
STC15W4K48S4-30I-LQFP48 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stc15w4k48s4-30i-lqfp48-etched.step/stc15w4k48s4-30i-lqfp48-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc15w4k48s4-30i-lqfp48.step/stc15w4k48s4-30i-lqfp48.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1219 pp, sha256
cc8c299c891646e0, retrieved 2026-11-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).