main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stc15w408as-35i-dip16: symbol repaired (body fitted to the names) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stc15w408as-35i-dip16-etched.glb Publish 0.1.0 · Ray
stc15w408as-35i-dip16-etched.step stc15w408as-35i-dip16: factory component page (tier=lcsc) · Ray
stc15w408as-35i-dip16-hero.glb stc15w408as-35i-dip16: hero GLB from the etched model (keeps the MPN mark) · Ray
stc15w408as-35i-dip16-hero.overlay.json Publish 0.1.0 · Ray
stc15w408as-35i-dip16.glb Publish 0.1.0 · Ray
stc15w408as-35i-dip16.kicad_mod Publish 0.1.0 · Ray
stc15w408as-35i-dip16.kicad_sym stc15w408as-35i-dip16: symbol repaired (body fitted to the names) · Ray
stc15w408as-35i-dip16.lbr stc15w408as-35i-dip16: symbol repaired (body fitted to the names) · Ray
stc15w408as-35i-dip16.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

STC15W408AS-35I-DIP16

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · DIP-16

STC15W408AS-35I-DIP16 from STC Micro, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.2 bidirectional Standard quasi-bidirectional I/O P1.2 that also serves as ADC channel 2, SPI slave select SS, CCP/PCA external count input ECI, and comparator result output CMPO.
2 P1.3 bidirectional Standard I/O P1.3 that also serves as ADC channel 3 and SPI MOSI (master output, slave input).
3 P1.4 bidirectional Standard I/O P1.4 that also serves as ADC channel 4 and SPI MISO (master input, slave output).
4 P1.5 bidirectional Standard I/O P1.5 that also serves as ADC channel 5 and the SPI serial clock SCLK.
5 P5.4/RST/SysClkO/CMP- bidirectional Standard I/O P5.4 that is also the active-high reset input RST, the system clock output SysClkO (SysClk/1, /2 or /4), and the comparator negative input CMP-, which must be set to high-impedance input when used as CMP-.
6 Vcc power_in Positive power supply; the STC15W408AS selection table lists the operating voltage as 2.5 V to 5.5 V.
7 P5.5/CMP+ bidirectional Standard I/O P5.5 that is also the comparator positive input CMP+, which must be set to high-impedance input when used as CMP+.
8 Gnd power_in Power supply negative terminal, connected to ground.
9 P3.0/RxD/INT4/T2CLKO bidirectional Standard I/O P3.0 that also serves as UART1 receive RxD, external interrupt INT4 (falling edge only, power-down wake-up capable), and Timer 2 clock output T2CLKO.
10 P3.1/TxD/T2 bidirectional Standard I/O P3.1 that also serves as UART1 transmit TxD and the external count input of Timer/Counter 2 (T2).
11 P3.2/INT0 bidirectional Standard I/O P3.2 that also serves as external interrupt INT0, which is rising- or falling-edge triggered (falling-edge only if IT0=1) and supports power-down wake-up.
12 P3.3/INT1 bidirectional Standard I/O P3.3 that also serves as external interrupt INT1, which is rising- or falling-edge triggered (falling-edge only if IT1=1) and supports power-down wake-up.
13 P3.6/INT2/RxD_2/CCP1_2 bidirectional Standard I/O P3.6 that also serves as external interrupt INT2 (falling edge only, power-down wake-up capable), UART1 alternate receive RxD_2, and CCP channel 1 alternate CCP1_2.
14 P3.7/INT3/TxD_2/CCP2 bidirectional Standard I/O P3.7 that also serves as external interrupt INT3 (falling edge only, power-down wake-up capable), UART1 alternate transmit TxD_2, and CCP channel 2 (CCP2 / CCP2_2).
15 P1.0/ADC0/CCP1 bidirectional Standard I/O P1.0 that also serves as ADC channel 0 and CCP/PCA channel 1 for capture, high-speed output and PWM.
16 P1.1/ADC1/CCP0 bidirectional Standard I/O P1.1 that also serves as ADC channel 1 and CCP/PCA channel 0 for capture, high-speed output and PWM.

Key specifications

Parameter Value
Manufacturer STC Micro
Package DIP-16
Category Embedded Processors & Controllers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 ℃ 1184
Operating temperature (I) TA -40 85 ℃ 1184
DC power supply (5V) VDD - VSS -0.3 5.5 V 1184
Voltage on any pin -0.3 V 1184
Operating Voltage VDD 3.3 5 5.5 V 1184
Power Down Current IPD 0.1 uA 5V 1184
Operating Current ICC 4 20 mA 5V 1184
Input Low (P0,P1,P2,P3) VIL1 0.8 V 5V 1184
Input High (P0,P1,P2,P3) VIH1 2 V 5V 1184
Input High (RESET) VIH2 2.2 V 5V 1184
Sourcing Current for output high (P0,P1,P2,P3)(Quasi-output) IOH1 200 270 uA 5V 1184
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA Vpin=0V 1184
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA Vpin=2.0V 1184

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following 441

CAD (KiCad official)

  • Symbol: STC15W408AS-35I-DIP16
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: stc15w408as-35i-dip16-etched.step / stc15w408as-35i-dip16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc15w408as-35i-dip16.step / stc15w408as-35i-dip16.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1219 pp, sha256 cc8c299c891646e0, retrieved 2026-10-31, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF