main
Ray
Publish 0.1.0
a320bef
STC15W104-35I-SOP8
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
STC15W104-35I-SOP8 from STC Micro, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3.4/T0/INT2/MCLKO/RST | bidirectional | Standard quasi-bidirectional I/O (PORT3[4]) that can also be configured as the RST reset pin (active-high reset), the T0 external input, the INT2 falling-edge-only external interrupt with power-down wake-up support, or the MCLKO master clock output (MCLK/1, MCLK/2 or MCLK/4, internal R/C clock only on this series). |
| 2 | Vcc | power_in | Positive power supply pin; the STC15W104 series operates from 5.5 V down to 2.5 V. |
| 3 | P3.5/T0CLKO/INT3 | bidirectional | Standard I/O (PORT3[5]) that can also serve as the T0CLKO timer 0 clock output (enabled via INT_CLKO[0]), and as the INT3 falling-edge-only external interrupt with power-down wake-up support. |
| 4 | Gnd | power_in | Power supply ground (电源负极,接地). |
| 5 | P3.0/INT4/T2CLKO | bidirectional | Standard I/O (PORT3[0]) that can also serve as the INT4 falling-edge-only external interrupt with power-down wake-up support, or as the T2CLKO timer 2 clock output (enabled via INT_CLKO[2]); the datasheet notes the serial port can be built from P3.0/INT4 and P3.1 combined with a timer. |
| 6 | P3.1/T2 | bidirectional | Standard I/O (PORT3[1]) that serves as the external count/clock input for timer/counter 2 (T2). |
| 7 | P3.2/INT0 | bidirectional | Standard I/O (PORT3[2]) that serves as external interrupt 0, triggered on rising or falling edge (falling-edge only when IT0 is set), with power-down wake-up support. |
| 8 | P3.3/INT1/RSTOUT_LOW | bidirectional | Standard I/O (PORT3[3]) that serves as external interrupt 1, triggered on rising or falling edge (falling-edge only when IT1 is set), with power-down wake-up support; it can also be the RSTOUT_LOW output, which is driven low after power-on and during reset and is then software-controllable. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 3.3 | 5 | 5.5 | V | 1184 | |
| Operating Current | ICC | 4 | 20 | mA | 5V | 1184 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 1184 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 1184 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 5V | 1184 | ||
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 200 | 270 | uA | 5V | 1184 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | Vpin=0V | 1184 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 1184 |
| Storage temperature | TST | -55 | 125 | ℃ | 1184 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1184 | ||
| DC power supply (5V) | VDD - VSS | -0.3 | 5.5 | V | 1184 | ||
| Voltage on any pin | -0.3 | V | Printed maximum is VCC + 0.3 V (not a fixed number) | 1184 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following | 441 |
CAD (KiCad official)
- Symbol:
STC15W104-35I-SOP8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
stc15w104-35i-sop8-etched.step/stc15w104-35i-sop8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc15w104-35i-sop8.step/stc15w104-35i-sop8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1219 pp, sha256
cc8c299c891646e0, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STC15W104-35I-SOP8
**STC Micro** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
STC15W104-35I-SOP8 from STC Micro, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3.4/T0/INT2/MCLKO/RST | bidirectional | Standard quasi-bidirectional I/O (PORT3[4]) that can also be configured as the RST reset pin (active-high reset), the T0 external input, the INT2 falling-edge-only external interrupt with power-down wake-up support, or the MCLKO master clock output (MCLK/1, MCLK/2 or MCLK/4, internal R/C clock only on this series). |
| 2 | Vcc | power_in | Positive power supply pin; the STC15W104 series operates from 5.5 V down to 2.5 V. |
| 3 | P3.5/T0CLKO/INT3 | bidirectional | Standard I/O (PORT3[5]) that can also serve as the T0CLKO timer 0 clock output (enabled via INT_CLKO[0]), and as the INT3 falling-edge-only external interrupt with power-down wake-up support. |
| 4 | Gnd | power_in | Power supply ground (电源负极,接地). |
| 5 | P3.0/INT4/T2CLKO | bidirectional | Standard I/O (PORT3[0]) that can also serve as the INT4 falling-edge-only external interrupt with power-down wake-up support, or as the T2CLKO timer 2 clock output (enabled via INT_CLKO[2]); the datasheet notes the serial port can be built from P3.0/INT4 and P3.1 combined with a timer. |
| 6 | P3.1/T2 | bidirectional | Standard I/O (PORT3[1]) that serves as the external count/clock input for timer/counter 2 (T2). |
| 7 | P3.2/INT0 | bidirectional | Standard I/O (PORT3[2]) that serves as external interrupt 0, triggered on rising or falling edge (falling-edge only when IT0 is set), with power-down wake-up support. |
| 8 | P3.3/INT1/RSTOUT_LOW | bidirectional | Standard I/O (PORT3[3]) that serves as external interrupt 1, triggered on rising or falling edge (falling-edge only when IT1 is set), with power-down wake-up support; it can also be the RSTOUT_LOW output, which is driven low after power-on and during reset and is then software-controllable. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 3.3 | 5 | 5.5 | V | | 1184 |
| Operating Current | ICC | | 4 | 20 | mA | 5V | 1184 |
| Input Low (P0,P1,P2,P3) | VIL1 | | | 0.8 | V | 5V | 1184 |
| Input High (P0,P1,P2,P3) | VIH1 | 2 | | | V | 5V | 1184 |
| Input High (RESET) | VIH2 | 2.2 | | | V | 5V | 1184 |
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 200 | 270 | | uA | 5V | 1184 |
| Logic 0 input current (P0,P1,P2,P3) | IIL | | | 50 | uA | Vpin=0V | 1184 |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 1184 |
| Storage temperature | TST | -55 | | 125 | ℃ | | 1184 |
| Operating temperature (I) | TA | -40 | | 85 | ℃ | | 1184 |
| DC power supply (5V) | VDD - VSS | -0.3 | | 5.5 | V | | 1184 |
| Voltage on any pin | | -0.3 | | | V | Printed maximum is VCC + 0.3 V (not a fixed number) | 1184 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following | 441 |
## CAD (KiCad official)
- Symbol: `STC15W104-35I-SOP8`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `stc15w104-35i-sop8-etched.step` / `stc15w104-35i-sop8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stc15w104-35i-sop8.step` / `stc15w104-35i-sop8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STC Micro datasheet](docs/stc15w104-35i-sop8-datasheet.pdf) (1219 pp, sha256 `cc8c299c891646e0`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stc15w104-35i-sop8-datasheet.pdf)