Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC12LE5A60S2-35I-LQFP48

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

STC12LE5A60S2-35I-LQFP48 from STC Micro, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P5.3 bidirectional General-purpose I/O port 5 bit 3 (P5 bits 0-3 only).
2 P1.5 bidirectional P1.5 I/O with MOSI SPI line and ADC5 analog input (P1.x must be set open-drain or input-only for A/D use).
3 P1.6 bidirectional P1.6 I/O with MISO SPI line and ADC6 analog input.
4 P1.7 bidirectional P1.7 I/O with SCLK SPI clock and ADC7 analog input.
5 P4.7/RST bidirectional P4.7 I/O or reset pin, selected at ISP programming time; if used as I/O an external clock must be used.
6 P3.0/RxD bidirectional P3.0 I/O and UART1 receive RxD; can wake CPU from power-down.
7 P4.3 bidirectional P4.3 I/O with SCLK, TxD2 and CCP1 alternate functions (via AUXR1 switch).
8 P3.1/TxD bidirectional P3.1 I/O and UART1 transmit TxD.
9 P3.2/INT0 bidirectional P3.2 I/O and external interrupt 0; can wake CPU from power-down.
10 P3.3/INT1 bidirectional P3.3 I/O and external interrupt 1; can wake CPU from power-down.
11 P3.4/T0/CLKOUT0 bidirectional P3.4 I/O, Timer0 external input and Timer0 overflow clock output CLKOUT0.
12 P3.5/T1/CLKOUT1 bidirectional P3.5 I/O, Timer1 external input and Timer1 overflow clock output CLKOUT1.
13 P3.6/WR bidirectional P3.6 I/O and external data memory write strobe WR.
14 P3.7/RD bidirectional P3.7 I/O and external data memory read strobe RD.
15 XTAL2 output Crystal oscillator output; leave floating when an external clock is fed to XTAL1 or the internal RC oscillator is used.
16 XTAL1 input Crystal oscillator input or external clock input.
17 Gnd power_in Ground.
18 P4.0/SS bidirectional P4.0 I/O; SS slave select when SPI is switched to P4 (SPI_P4=1).
19 P2.0 bidirectional General-purpose I/O port 2 bit 0.
20 P2.1 bidirectional General-purpose I/O port 2 bit 1.
21 P2.2 bidirectional General-purpose I/O port 2 bit 2.
22 P2.3 bidirectional General-purpose I/O port 2 bit 3.
23 P2.4 bidirectional General-purpose I/O port 2 bit 4.
24 P5.0 bidirectional General-purpose I/O port 5 bit 0.
25 P5.1 bidirectional General-purpose I/O port 5 bit 1.
26 P2.5 bidirectional General-purpose I/O port 2 bit 5.
27 P2.6 bidirectional General-purpose I/O port 2 bit 6.
28 P2.7 bidirectional General-purpose I/O port 2 bit 7.
29 P4.4/NA bidirectional After reset a weak pull-up pin with no function; set P4SW.4=1 to make it I/O P4.4.
30 P4.5/ALE bidirectional After reset ALE signal (output only on external MOVX access); set P4SW.5=1 to make it I/O P4.5.
31 P4.1 bidirectional P4.1 I/O with ECI and MOSI alternate functions when PCA/SPI are switched to P4.
32 P4.6/EX_LVD/RST2 bidirectional After reset external low-voltage-detect input (also second reset function pin RST2); set P4SW.6=1 to make it I/O P4.6.
33 P0.7 bidirectional General-purpose I/O port 0 bit 7.
34 P0.6 bidirectional General-purpose I/O port 0 bit 6.
35 P0.5 bidirectional General-purpose I/O port 0 bit 5.
36 P0.4 bidirectional General-purpose I/O port 0 bit 4.
37 P0.3 bidirectional General-purpose I/O port 0 bit 3.
38 P0.2 bidirectional General-purpose I/O port 0 bit 2.
39 P0.1 bidirectional General-purpose I/O port 0 bit 1.
40 P0.0 bidirectional General-purpose I/O port 0 bit 0.
41 Vcc power_in Power supply; 2.2-3.6V for STC12LE5A60S2 series.
42 P4.2 bidirectional P4.2 I/O with MISO, RxD2 and CCP0 alternate functions (via AUXR1 switch).
43 P1.0 bidirectional P1.0 I/O with ADC0 analog input and CLKOUT2 (BRT clock output).
44 P1.1 bidirectional P1.1 I/O with ADC1 analog input.
45 P1.2 bidirectional P1.2 I/O with ADC2 analog input, ECI and RxD2.
46 P1.3 bidirectional P1.3 I/O with ADC3 analog input, CCP0 and TxD2.
47 P1.4 bidirectional P1.4 I/O with ADC4 analog input, CCP1 and SS SPI slave select.
48 P5.2 bidirectional General-purpose I/O port 5 bit 2.

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 ℃ 306
Operating Temperature(I) TA -40 85 ℃ 306

CAD (KiCad official)

  • Symbol: STC12LE5A60S2-35I-LQFP48
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stc12le5a60s2-35i-lqfp48-etched.step / stc12le5a60s2-35i-lqfp48-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc12le5a60s2-35i-lqfp48.step / stc12le5a60s2-35i-lqfp48.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1543 pp, sha256 223f6338fd5b4665, retrieved 2026-11-09, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF