main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stc12c5a60s2-35i-pdip40: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stc12c5a60s2-35i-pdip40-etched.glb stc12c5a60s2-35i-pdip40: factory component page (tier=lcsc) · Ray
stc12c5a60s2-35i-pdip40-etched.step stc12c5a60s2-35i-pdip40: factory component page (tier=lcsc) · Ray
stc12c5a60s2-35i-pdip40-hero.glb stc12c5a60s2-35i-pdip40: hero GLB from the etched model (keeps the MPN mark) · Ray
stc12c5a60s2-35i-pdip40-hero.overlay.json stc12c5a60s2-35i-pdip40: hero GLB from the etched model (keeps the MPN mark) · Ray
stc12c5a60s2-35i-pdip40.glb Publish 0.1.0 · Ray
stc12c5a60s2-35i-pdip40.kicad_mod Publish 0.1.0 · Ray
stc12c5a60s2-35i-pdip40.kicad_sym Publish 0.1.0 · Ray
stc12c5a60s2-35i-pdip40.lbr Publish 0.1.0 · Ray
stc12c5a60s2-35i-pdip40.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 40 pins · Ray

STC12C5A60S2-35I-PDIP40

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · DIP-40

STC12C5A60S2-35I-PDIP40 from STC Micro, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 CLKOUT2/ADC0/P1.0 bidirectional Port 1 bit 0 is a general I/O (mode set by P1M1/P1M0), also the CLKOUT2 clock output from the BRT overflow and ADC channel 0; ADC use requires setting the pin to open-drain or high-impedance input first.
2 ADC1/P1.1 bidirectional Port 1 bit 1 is a general I/O that doubles as ADC channel 1 input and must be set to open-drain or high-impedance input before being used for A/D conversion.
3 RxD2/ECI/ADC2/P1.2 bidirectional Port 1 bit 2 carries the UART2 receive input RxD2, the PCA external clock ECI and ADC channel 2; UART2 can be switched to P4.2 through AUXR1 bit 4 (S2_P4).
4 TxD2/CCP0/ADC3/P1.3 bidirectional Port 1 bit 3 carries the UART2 transmit output TxD2, PCA module 0 CCP0 and ADC channel 3; UART2 can be switched to P4.3 through AUXR1 bit 4 (S2_P4).
5 SS/CCP1/ADC4/P1.4 bidirectional Port 1 bit 4 carries the SPI slave select SS, PCA module 1 CCP1 and ADC channel 4; SPI can be moved to P4 through AUXR1 bit 5 (SPI_P4).
6 MOSI/ADC5/P1.5 bidirectional Port 1 bit 5 carries the SPI master-out/slave-in line MOSI and ADC channel 5; it can be moved to P4.1 when SPI_P4 is set.
7 MISO/ADC6/P1.6 bidirectional Port 1 bit 6 carries the SPI master-in/slave-out line MISO and ADC channel 6; it can be moved to P4.2 when SPI_P4 is set.
8 SCLK/ADC7/P1.7 bidirectional Port 1 bit 7 carries the SPI clock SCLK and ADC channel 7; it can be moved to P4.3 when SPI_P4 is set.
9 RST/P4.7 bidirectional Reset input when configured as RST (ISP option); when used as P4.7 I/O an external crystal is required, and a 470 Ω to 1 kΩ pull-down is recommended to avoid download lockout.
10 RxD/P3.0 bidirectional Port 3 bit 0 carries the UART1 receive input RxD and can wake the part from power-down when RXD_PIN_IE is set.
11 TxD/P3.1 bidirectional Port 3 bit 1 carries the UART1 transmit output TxD.
12 INT0/P3.2 bidirectional Port 3 bit 2 carries external interrupt 0 INT0 and can wake the CPU from power-down mode.
13 INT1/P3.3 bidirectional Port 3 bit 3 carries external interrupt 1 INT1 and can wake the CPU from power-down mode.
14 CLKOUT0/T0/P3.4 bidirectional Port 3 bit 4 carries Timer 0 external input T0, the T0 clock output CLKOUT0 and a power-down wake function when T0_PIN_IE is set.
15 CLKOUT1/T1/P3.5 bidirectional Port 3 bit 5 carries Timer 1 external input T1, the T1 clock output CLKOUT1 and a power-down wake function when T1_PIN_IE is set.
16 WR/P3.6 bidirectional Port 3 bit 6 carries the external data memory write strobe WR, used only when external RAM is accessed by MOVX.
17 RD/P3.7 bidirectional Port 3 bit 7 carries the external data memory read strobe RD, used only when external RAM is accessed by MOVX.
18 XTAL2 output Output of the on-chip inverting oscillator amplifier for the external crystal; it is left floating when the internal R/C oscillator is selected.
19 XTAL1 input Input to the on-chip inverting oscillator amplifier and internal clock circuit; an external clock may be driven into XTAL1 with XTAL2 left floating.
20 Gnd power_in Ground reference for the device.
21 P2.0 bidirectional Port 2 bit 0 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
22 P2.1 bidirectional Port 2 bit 1 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
23 P2.2 bidirectional Port 2 bit 2 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
24 P2.3 bidirectional Port 2 bit 3 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
25 P2.4 bidirectional Port 2 bit 4 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
26 P2.5 bidirectional Port 2 bit 5 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
27 P2.6 bidirectional Port 2 bit 6 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
28 P2.7 bidirectional Port 2 bit 7 is a general I/O configured by P2M1/P2M0 (quasi-bidirectional, push-pull, input-only or open-drain).
29 P4.4/NA bidirectional Port 4 bit 4 is a weak-pull-up pin with no function after reset; setting P4SW.4 = 1 makes it a general I/O.
30 P4.5/ALE bidirectional Port 4 bit 5 outputs ALE only during MOVX accesses to external devices; setting P4SW.5 = 1 makes it a general I/O.
31 P4.6/EX_LVD/RST2 bidirectional Port 4 bit 6 carries the second reset input RST2 and the external low-voltage detect input EX_LVD; setting P4SW.6 = 1 makes it a general I/O.
32 P0.7 bidirectional Port 0 bit 7 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
33 P0.6 bidirectional Port 0 bit 6 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
34 P0.5 bidirectional Port 0 bit 5 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
35 P0.4 bidirectional Port 0 bit 4 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
36 P0.3 bidirectional Port 0 bit 3 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
37 P0.2 bidirectional Port 0 bit 2 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
38 P0.1 bidirectional Port 0 bit 1 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
39 P0.0 bidirectional Port 0 bit 0 is a general I/O configured by P0M1/P0M0, and each I/O pin can sink up to 20 mA while the whole chip must not exceed 100 mA.
40 Vcc power_in Positive supply; the 5 V family (STC12C5A60S2) is specified at 5.5 V to 3.5 V per the selection table.

Key specifications

Parameter Value
Manufacturer STC Micro
Package DIP-40
Category Embedded Processors & Controllers
Pins 40

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 °C 306
Operating Temperature (I) TA -40 85 °C Industrial grade (I) 306
DC Power Supply (5V MCU) VDD-VSS -0.3 5.5 V 5V MCU 306
Voltage on any pin -0.3 V Maximum printed as VCC+0.3 V; not numeric 306
VDD Operating Voltage VDD 3.3 5 5.5 V 306
Power Down Current IPWDN 0.1 uA 5V; printed as <0.1 306
Idle Current IIDLE 3 mA 5V 306
Operating Current ICC 20 mA 5V 306
Input low voltage (P0,P1,P2,P3) VIL1 0.8 V 5V 306
Input High voltage (P0,P1,P2,P3) VIH1 2 V 5V 306
Input High voltage (RESET) VIH2 2.2 V 5V 306
Sinking Current for Output Low (P0,P1,P2,P3) IOL1 20 mA 5V; Vpin=0.45V 306
(Quasi-output) Sourcing Current for Output High (P0,P1,P2,P3) IOH1 150 230 uA 5V 306
(Push-Pull, Strong-output) Sourcing Current for Output High (P0,P1,P2,P3) IOH2 20 mA 5V; Vpin=2.4V 306
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA VPIN=0V 306
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA VPIN=2V 306

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STC12C5A60S2-35I-PDIP40
  • Footprint: Package_DIP:DIP-40_W15.24mm
  • 3D model: DIP-40, generated on the KiCad land (body 13.84 x 52 mm, terminals on the pads, 4.83 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stc12c5a60s2-35i-pdip40-etched.step / stc12c5a60s2-35i-pdip40-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc12c5a60s2-35i-pdip40.step / stc12c5a60s2-35i-pdip40.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1543 pp, sha256 7fde44da8887b7a0, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF