main
Ray Publish 0.1.0 071a7c1

STC12C5A56S2-35I

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)

STC12C5A56S2-35I from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.5 bidirectional P1.5 general I/O with MOSI SPI function and ADC5 analog input (set to open-drain or high-impedance input for A/D use).
2 P1.6 bidirectional P1.6 general I/O with MISO SPI function and ADC6 analog input.
3 P1.7 bidirectional P1.7 general I/O with SCLK SPI clock function and ADC7 analog input.
4 RST/P4.7 input Reset input or P4.7 I/O, selected at ISP programming time; as P4.7 an external clock is required.
5 P3.0/RxD bidirectional P3.0 I/O with UART1 receive RxD; can wake the MCU from power-down.
6 P4.3/SCLK/TxD2/CCP1 bidirectional P4.3 I/O that can carry SPI SCLK, UART2 TxD2 or CCP1 when switched from P1 via AUXR1.
7 P3.1/TxD bidirectional P3.1 I/O with UART1 transmit TxD.
8 P3.2/INT0 bidirectional P3.2 I/O with external interrupt 0; can wake the MCU from power-down.
9 P3.3/INT1 bidirectional P3.3 I/O with external interrupt 1; can wake the MCU from power-down.
10 P3.4/T0/CLKOUT0 bidirectional P3.4 I/O with Timer0 external input and Timer0 overflow clock output CLKOUT0.
11 P3.5/T1/CLKOUT1 bidirectional P3.5 I/O with Timer1 external input and Timer1 overflow clock output CLKOUT1.
12 P3.6/WR bidirectional P3.6 I/O, also external data memory write strobe WR.
13 P3.7/RD bidirectional P3.7 I/O, also external data memory read strobe RD.
14 XTAL2 output Crystal oscillator output; leave floating when an external clock is fed to XTAL1 or the internal RC oscillator is used.
15 XTAL1 input Crystal oscillator input or external clock input.
16 Gnd power_in Ground.
17 P4.0/SS bidirectional P4.0 I/O that carries SPI SS when SPI is switched to P4.
18 P2.0 bidirectional P2.0 general I/O (address bus high byte for external memory).
19 P2.1 bidirectional P2.1 general I/O (address bus high byte for external memory).
20 P2.2 bidirectional P2.2 general I/O (address bus high byte for external memory).
21 P2.3 bidirectional P2.3 general I/O (address bus high byte for external memory).
22 P2.4 bidirectional P2.4 general I/O (address bus high byte for external memory).
23 P2.5 bidirectional P2.5 general I/O (address bus high byte for external memory).
24 P2.6 bidirectional P2.6 general I/O (address bus high byte for external memory).
25 P2.7 bidirectional P2.7 general I/O (address bus high byte for external memory).
26 P4.4/NA bidirectional After reset a weak pull-up with no function; setting P4SW.4=1 makes it P4.4 I/O.
27 P4.5/ALE bidirectional After reset it is the ALE signal (output only on MOVX external access); setting P4SW.5=1 makes it P4.5 I/O.
28 P4.1/ECI/MOSI bidirectional P4.1 I/O that carries PCA ECI or SPI MOSI when switched to P4.
29 P4.6/EX_LVD/RST2 bidirectional After reset it is the external low-voltage detect input / second reset pin (threshold about 1.33V); setting P4SW.6=1 makes it P4.6 I/O.
30 P0.7 bidirectional P0.7 general I/O (external bus AD7).
31 P0.6 bidirectional P0.6 general I/O (external bus AD6).
32 P0.5 bidirectional P0.5 general I/O (external bus AD5).
33 P0.4 bidirectional P0.4 general I/O (external bus AD4).
34 P0.3 bidirectional P0.3 general I/O (external bus AD3).
35 P0.2 bidirectional P0.2 general I/O (external bus AD2).
36 P0.1 bidirectional P0.1 general I/O (external bus AD1).
37 P0.0 bidirectional P0.0 general I/O (external bus AD0).
38 Vcc power_in Positive supply, 3.5V to 5.5V for the STC12C5A56S2 5V device.
39 P4.2/MISO/RxD2/CCP0 bidirectional P4.2 I/O that carries SPI MISO, UART2 RxD2 or CCP0 when switched from P1 via AUXR1.
40 P1.0/ADC0/CLKOUT2 bidirectional P1.0 I/O with ADC0 analog input and baud-rate timer clock output CLKOUT2.
41 P1.1/ADC1 bidirectional P1.1 I/O with ADC1 analog input.
42 P1.2/ADC2/ECI/RxD2 bidirectional P1.2 I/O with ADC2 analog input, PCA external clock ECI and UART2 receive RxD2.
43 P1.3/ADC3/CCP0/TxD2 bidirectional P1.3 I/O with ADC3 analog input, PCA/PWM channel CCP0 and UART2 transmit TxD2.
44 P1.4/ADC4/SS/CCP1 bidirectional P1.4 I/O with ADC4 analog input, SPI SS and PCA/PWM channel CCP1.

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC power supply (5V MCU) VDD-VSS -0.3 5.5 V 5V MCU 306
Storage temperature TST -55 125 °C 306
Operating temperature (I) industrial grade TA -40 85 °C Operating Temperature(I) 306
Operating voltage VDD 3.3 5 5.5 V 5V MCU 306
Power down current IPWDN 0.1 uA <0.1 uA printed; 5V 306
Operating current ICC 20 mA 5V 306
Input low voltage (P0,P1,P2,P3) VIL1 0.8 V 5V 306
Input high voltage (P0,P1,P2,P3) VIH1 2 V 5V 306
Input high voltage (RESET) VIH2 2.2 V 5V 306
Sinking current for output low (P0,P1,P2,P3) IOL1 20 mA 5V; Vpin=0.45V 306
Sourcing current for output high, quasi-output (P0,P1,P2,P3) IOH1 150 230 uA 5V 306
Sourcing current for output high, push-pull strong-output (P0,P1,P2,P3) IOH2 20 mA 5V; Vpin=2.4V 306
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA VPIN=0V 306
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA VPIN=2V 306

CAD (KiCad official)

  • Symbol: STC12C5A56S2-35I
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: stc12c5a56s2-35-etched.step / stc12c5a56s2-35-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc12c5a56s2-35.step / stc12c5a56s2-35.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1543 pp, sha256 7fde44da8887b7a0, retrieved 2026-11-09, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF