3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTC12C5A32S2-35I-PDIP40
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · DIP-40
STC12C5A32S2-35I-PDIP40 from STC Micro, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.0 | bidirectional | P1.0 general I/O with ADC0 analog input and CLKOUT2 (BRT clock output); set to open-drain or high-impedance input when used as ADC. |
| 2 | P1.1 | bidirectional | P1.1 general I/O with ADC1 analog input. |
| 3 | P1.2 | bidirectional | P1.2 general I/O with ADC2 input, ECI (PCA external clock input) and RxD2 (UART2 receive). |
| 4 | P1.3 | bidirectional | P1.3 general I/O with ADC3 input, CCP0 (PCA/PWM channel 0) and TxD2 (UART2 transmit). |
| 5 | P1.4 | bidirectional | P1.4 general I/O with ADC4 input, CCP1 (PCA/PWM channel 1) and SPI SS. |
| 6 | P1.5 | bidirectional | P1.5 general I/O with ADC5 input and SPI MOSI. |
| 7 | P1.6 | bidirectional | P1.6 general I/O with ADC6 input and SPI MISO. |
| 8 | P1.7 | bidirectional | P1.7 general I/O with ADC7 input and SPI SCLK. |
| 9 | RST/P4.7 | input | Reset pin or P4.7 I/O, selected at ISP programming time; if set as P4.7 an external clock must be used. |
| 10 | P3.0 | bidirectional | P3.0 general I/O and RxD (UART1 receive); also INT-style power-down wakeup pin. |
| 11 | P3.1 | bidirectional | P3.1 general I/O and TxD (UART1 transmit). |
| 12 | P3.2 | bidirectional | P3.2 general I/O and INT0 external interrupt 0; can wake the CPU from power-down. |
| 13 | P3.3 | bidirectional | P3.3 general I/O and INT1 external interrupt 1; can wake the CPU from power-down. |
| 14 | P3.4 | bidirectional | P3.4 general I/O with T0 input and CLKOUT0 (Timer0 overflow clock output); can wake from power-down. |
| 15 | P3.5 | bidirectional | P3.5 general I/O with T1 input and CLKOUT1 (Timer1 overflow clock output); can wake from power-down. |
| 16 | P3.6 | bidirectional | P3.6 general I/O and WR (external data memory write strobe). |
| 17 | P3.7 | bidirectional | P3.7 general I/O and RD (external data memory read strobe). |
| 18 | XTAL2 | passive | Crystal oscillator output; leave floating when an external clock is driven on XTAL1 or the internal RC is used. |
| 19 | XTAL1 | input | Crystal oscillator input or external clock input. |
| 20 | Gnd | power_in | Ground. |
| 21 | P2.0 | bidirectional | P2.0 general I/O (port 2, external memory address high byte). |
| 22 | P2.1 | bidirectional | P2.1 general I/O (port 2). |
| 23 | P2.2 | bidirectional | P2.2 general I/O (port 2). |
| 24 | P2.3 | bidirectional | P2.3 general I/O (port 2). |
| 25 | P2.4 | bidirectional | P2.4 general I/O (port 2). |
| 26 | P2.5 | bidirectional | P2.5 general I/O (port 2). |
| 27 | P2.6 | bidirectional | P2.6 general I/O (port 2). |
| 28 | P2.7 | bidirectional | P2.7 general I/O (port 2). |
| 29 | P4.4/NA | bidirectional | After reset P4.4 is a weak pull-up with no function; setting P4SW.4=1 makes it I/O P4.4. |
| 30 | P4.5/ALE | bidirectional | After reset ALE signal output only during MOVX external access; setting P4SW.5=1 makes it I/O P4.5. |
| 31 | P4.6/EX_LVD/RST2 | bidirectional | External low-voltage detect / second reset pin after reset (threshold about 1.32V at 5V); setting P4SW.6=1 makes it I/O P4.6. |
| 32 | P0.7 | bidirectional | P0.7 general I/O (port 0, external bus data/address). |
| 33 | P0.6 | bidirectional | P0.6 general I/O (port 0). |
| 34 | P0.5 | bidirectional | P0.5 general I/O (port 0). |
| 35 | P0.4 | bidirectional | P0.4 general I/O (port 0). |
| 36 | P0.3 | bidirectional | P0.3 general I/O (port 0). |
| 37 | P0.2 | bidirectional | P0.2 general I/O (port 0). |
| 38 | P0.1 | bidirectional | P0.1 general I/O (port 0). |
| 39 | P0.0 | bidirectional | P0.0 general I/O (port 0). |
| 40 | Vcc | power_in | Positive supply, 5.5V to 3.5V for the STC12C5A series. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | DIP-40 |
| Category | Embedded Processors & Controllers |
| Pins | 40 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -55 | 125 | ℃ | 306 | ||
| Operating Temperature (I) | TA | -40 | 85 | ℃ | Industrial grade | 306 | |
| DC Power Supply (5V MCU) | VDD-VSS | -0.3 | 5.5 | V | 5V MCU | 306 | |
| Voltage on any Pin | -0.3 | V | Max printed as VCC+0.3 | 306 | |||
| Operating Voltage | VDD | 3.3 | 5 | 5.5 | V | 306 | |
| Input low voltage (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 306 | ||
| Input High voltage (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 306 | ||
| Input High voltage (RESET) | VIH2 | 2.2 | V | 5V | 306 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | VPIN=2V | 306 |
| Sourcing Current for Output high, quasi-output (P0,P1,P2,P3) | IOH1 | 150 | 230 | uA | 5V | 306 | |
| Power Down Current | IPWDN | 0.1 | uA | 5V; printed <0.1 | 306 | ||
| Operating Current | ICC | 4 | 20 | mA | 5V | 306 | |
| Idle Current | IIDLE | 3 | mA | 5V | 306 | ||
| Sinking Current for Output Low (P0,P1,P2,P3) | IOL1 | 20 | mA | 5V, Vpin=0.45V | 306 | ||
| Sourcing Current for Output High, push-pull (P0,P1,P2,P3) | IOH2 | 20 | mA | 5V, Vpin=2.4V | 306 | ||
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | VPIN=0V | 306 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STC12C5A32S2-35I-PDIP40 - Footprint:
Package_DIP:DIP-40_W15.24mm - 3D model: DIP-40, generated on the KiCad land (body 13.84 x 52 mm, terminals on the pads, 4.83 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stc12c5a32s2-35i-pdip40-etched.step/stc12c5a32s2-35i-pdip40-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc12c5a32s2-35i-pdip40.step/stc12c5a32s2-35i-pdip40.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1543 pp, sha256
7fde44da8887b7a0, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).