Generated by kicad-footprint-generator · KiCad file format 20260206
STC12C5A32S2-35I-LQFP48
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
STC12C5A32S2-35I-LQFP48 from STC Micro, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P5.3 | bidirectional | General-purpose I/O port 5 bit 3, configurable via P5M1/P5M0 into quasi-bidirectional, push-pull, input-only or open-drain mode. |
| 2 | MOSI/ADC5/P1.5 | bidirectional | P1.5 I/O that serves as SPI MOSI or 10-bit ADC input channel 5; set to open-drain or input-only mode when used as ADC. |
| 3 | MISO/ADC6/P1.6 | bidirectional | P1.6 I/O that serves as SPI MISO or 10-bit ADC input channel 6; set to open-drain or input-only mode when used as ADC. |
| 4 | SCLK/ADC7/P1.7 | bidirectional | P1.7 I/O that serves as SPI clock (SCLK) or 10-bit ADC input channel 7; set to open-drain or input-only mode when used as ADC. |
| 5 | P4.7/RST | bidirectional | Reset input or P4.7 I/O, chosen at ISP programming time; if set as P4.7 I/O an external clock must be used. |
| 6 | RxD/P3.0 | bidirectional | P3.0 I/O that serves as UART1 receive (RxD) and can wake the part from power-down mode. |
| 7 | SCLK/TxD2/CCP1/P4.3 | bidirectional | P4.3 I/O that carries SPI SCLK, UART2 TxD2 or PCA CCP1 when the P4 alternate-pin option is selected in AUXR1. |
| 8 | TxD/P3.1 | bidirectional | P3.1 I/O that serves as UART1 transmit (TxD). |
| 9 | INT0/P3.2 | bidirectional | P3.2 I/O that serves as external interrupt 0 input and can wake the part from power-down mode. |
| 10 | INT1/P3.3 | bidirectional | P3.3 I/O that serves as external interrupt 1 input and can wake the part from power-down mode. |
| 11 | CLKOUT0/T0/P3.4 | bidirectional | P3.4 I/O that serves as Timer 0 external input or the Timer 0 overflow clock output (CLKOUT0), and can wake the part from power-down mode. |
| 12 | CLKOUT1/T1/P3.5 | bidirectional | P3.5 I/O that serves as Timer 1 external input or the Timer 1 overflow clock output (CLKOUT1), and can wake the part from power-down mode. |
| 13 | P3.6/WR | bidirectional | P3.6 I/O that serves as the external data memory write strobe (WR). |
| 14 | P3.7/RD | bidirectional | P3.7 I/O that serves as the external data memory read strobe (RD). |
| 15 | XTAL2 | output | Crystal oscillator output; leave floating when an external clock is fed into XTAL1. |
| 16 | XTAL1 | input | Crystal oscillator input or external clock input. |
| 17 | Gnd | power_in | Ground. |
| 18 | P4.0/SS | bidirectional | P4.0 I/O that serves as SPI slave select (SS) when SPI is switched to port 4. |
| 19 | P2.0 | bidirectional | General-purpose I/O port 2 bit 0, also the address bus bit for external memory access. |
| 20 | P2.1 | bidirectional | General-purpose I/O port 2 bit 1, also the address bus bit for external memory access. |
| 21 | P2.2 | bidirectional | General-purpose I/O port 2 bit 2, also the address bus bit for external memory access. |
| 22 | P2.3 | bidirectional | General-purpose I/O port 2 bit 3, also the address bus bit for external memory access. |
| 23 | P2.4 | bidirectional | General-purpose I/O port 2 bit 4, also the address bus bit for external memory access. |
| 24 | P5.0 | bidirectional | General-purpose I/O port 5 bit 0, configurable via P5M1/P5M0 into quasi-bidirectional, push-pull, input-only or open-drain mode. |
| 25 | P5.1 | bidirectional | General-purpose I/O port 5 bit 1, configurable via P5M1/P5M0 into quasi-bidirectional, push-pull, input-only or open-drain mode. |
| 26 | P2.5 | bidirectional | General-purpose I/O port 2 bit 5, also the address bus bit for external memory access. |
| 27 | P2.6 | bidirectional | General-purpose I/O port 2 bit 6, also the address bus bit for external memory access. |
| 28 | P2.7 | bidirectional | General-purpose I/O port 2 bit 7, also the address bus bit for external memory access. |
| 29 | P4.4/NA | bidirectional | After reset (P4SW.4=0) this pin is a weak pull-up with no function; setting P4SW.4=1 makes it the P4.4 I/O. |
| 30 | P4.5/ALE | bidirectional | After reset (P4SW.5=0) this pin carries the ALE signal, output only during MOVX access to external devices; setting P4SW.5=1 makes it the P4.5 I/O. |
| 31 | P4.1/ECI/MOSI | bidirectional | P4.1 I/O that carries PCA external clock input (ECI) or SPI MOSI when the P4 alternate-pin option is selected. |
| 32 | P4.6/EX_LVD/RST2 | bidirectional | After reset (P4SW.6=0) this is the external low-voltage detect input (EX_LVD) that can act as the second reset RST2 and wake power-down mode; setting P4SW.6=1 makes it the P4.6 I/O. |
| 33 | P0.7 | bidirectional | General-purpose I/O port 0 bit 7, also the data/address bus bit for external memory access. |
| 34 | P0.6 | bidirectional | General-purpose I/O port 0 bit 6, also the data/address bus bit for external memory access. |
| 35 | P0.5 | bidirectional | General-purpose I/O port 0 bit 5, also the data/address bus bit for external memory access. |
| 36 | P0.4 | bidirectional | General-purpose I/O port 0 bit 4, also the data/address bus bit for external memory access. |
| 37 | P0.3 | bidirectional | General-purpose I/O port 0 bit 3, also the data/address bus bit for external memory access. |
| 38 | P0.2 | bidirectional | General-purpose I/O port 0 bit 2, also the data/address bus bit for external memory access. |
| 39 | P0.1 | bidirectional | General-purpose I/O port 0 bit 1, also the data/address bus bit for external memory access. |
| 40 | P0.0 | bidirectional | General-purpose I/O port 0 bit 0, also the data/address bus bit for external memory access. |
| 41 | Vcc | power_in | Positive supply; the STC12C5A60S2 (C) series operates from 5.5V to 3.5V. |
| 42 | MISO/RxD2/CCP0/P4.2 | bidirectional | P4.2 I/O that carries SPI MISO, UART2 RxD2 or PCA CCP0 when the P4 alternate-pin option is selected. |
| 43 | CLKOUT2/ADC0/P1.0 | bidirectional | P1.0 I/O that serves as the baud-rate timer clock output (CLKOUT2) or 10-bit ADC input channel 0; set to open-drain or input-only mode when used as ADC. |
| 44 | ADC1/P1.1 | bidirectional | P1.1 I/O that serves as 10-bit ADC input channel 1; set to open-drain or input-only mode when used as ADC. |
| 45 | RxD2/ECI/ADC2/P1.2 | bidirectional | P1.2 I/O that serves as UART2 receive (RxD2), PCA external clock input (ECI) or 10-bit ADC input channel 2. |
| 46 | TxD2/CCP0/ADC3/P1.3 | bidirectional | P1.3 I/O that serves as UART2 transmit (TxD2), PCA/PWM channel CCP0 or 10-bit ADC input channel 3, and can wake power-down mode. |
| 47 | SS/CCP1/ADC4/P1.4 | bidirectional | P1.4 I/O that serves as SPI slave select (SS), PCA/PWM channel CCP1 or 10-bit ADC input channel 4, and can wake power-down mode. |
| 48 | P5.2 | bidirectional | General-purpose I/O port 5 bit 2, configurable via P5M1/P5M0 into quasi-bidirectional, push-pull, input-only or open-drain mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
STC12C5A32S2-35I-LQFP48 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stc12c5a32s2-35i-lqfp48-etched.step/stc12c5a32s2-35i-lqfp48-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc12c5a32s2-35i-lqfp48.step/stc12c5a32s2-35i-lqfp48.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1543 pp, sha256
7fde44da8887b7a0, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).