Generated by kicad-footprint-generator · KiCad file format 20260206
ST8034HNQR
STMicroelectronics · Interface - Specialized · QFN-24-EP(4x4)
ST8034HNQR from STMicroelectronics, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD(INTF) | power_in | Microcontroller interface supply voltage, 1.6 V minimum to VDD+0.3 V maximum with 3.3 V typical. |
| 2 | VCC_SEL2 | input | VCC selection control signal for 5 V or 3 V card supply (see Table 13). |
| 3 | RSTIN | input | Card reset input from the microcontroller, active high. |
| 4 | VCC_SEL1 | input | VCC selection control signal for 1.8 V; overrides VCC_SEL2 (see Table 13). |
| 5 | CMDVCC | input | Activation sequence start input from the microcontroller, active low. |
| 6 | CLKDIV1 | input | CLK frequency division control input, used together with CLKDIV2 (see Table 12). |
| 7 | CLKDIV2 | input | CLK frequency division control input, used together with CLKDIV1 (see Table 12). |
| 8 | PRES | input | Card presence input, active low (PRES low means card present), debounced. |
| 9 | I/O | bidirectional | Card input/output data line (C7) with internal 9 kΩ pull-up to VCC. |
| 10 | AUX1 | bidirectional | Auxiliary card input/output data line (C4) with internal 9 kΩ pull-up to VCC. |
| 11 | AUX2 | bidirectional | Auxiliary card input/output data line (C8) with internal 9 kΩ pull-up to VCC. |
| 12 | GND | power_in | Ground reference. |
| 13 | CLK | output | Clock output to the card (C3). |
| 14 | RST | output | Card reset output (C2). |
| 15 | VCC | power_out | Card supply voltage output (C1), 5 V, 3 V or 1.8 V, with ICC below 65 mA in active mode. |
| 16 | VDDP | power_in | LDO supply voltage input for VCC generation, 4.85 V to 5.5 V for VCC = 5 V and 3 V to 5.5 V for VCC = 3 V or 1.8 V. |
| 17 | VDD | power_in | Control logic supply voltage input, 2.7 V to 3.6 V with 3.3 V typical. |
| 18 | PORADJ | input | Power-on reset threshold adjustment input, used with an optional external resistor divider. |
| 19 | OFF | output | Interrupt output to the microcontroller, active low, with internal 20 kΩ pull-up to VDD(INTF). |
| 20 | I/OUC | bidirectional | Microcontroller data I/O line with internal 10 kΩ pull-up to VDD(INTF). |
| 21 | AUXUC1 | bidirectional | Auxiliary microcontroller input/output data line with internal 10 kΩ pull-up to VDD(INTF). |
| 22 | AUXUC2 | bidirectional | Auxiliary microcontroller input/output data line with internal 10 kΩ pull-up to VDD(INTF). |
| 23 | XTAL1 | input | Crystal or external clock input, supplied from VDD. |
| 24 | XTAL2 | passive | Crystal connection; leave open when an external clock is used. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | QFN-24-EP(4x4) |
| Category | Interface |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, logic | VDD | 2.7 | 3.3 | 3.6 | V | 11 | |
| Supply voltage, power (VCC = 5 V) | VDDP | 4.85 | 5 | 5.5 | V | VCC = 5 V | 11 |
| Supply voltage, power (VCC = 3 V or 1.8 V) | VDDP | 3 | 3.3 | 5.5 | V | VCC = 3 V or 1.8 V | 11 |
| Supply voltage, microcontroller interface | VDD(INTF) | 1.6 | 3.3 | V | 11 | ||
| Ambient temperature range | TA | -25 | 85 | °C | 10 | ||
| Supply voltage, logic | VDD | -0.3 | 6 | V | 10 | ||
| Supply voltage, power | VDDP | -0.3 | 6 | V | 10 | ||
| Supply voltage, interface | VDD(INTF) | -0.3 | 6 | V | 10 | ||
| Input voltage on interface and control pins | VIN | -0.3 | 6 | V | XTAL1, XTAL2, RSTIN, I/OUC, AUX1UC, AUX2UC, CLKDIV1, CLKDIV2, CS, VCC_SEL1, VCC_SEL2, PORADJ, CMDVCC, OFF, PRES, I/O, AUX1, AUX2 | 10 | |
| Human body model on card lines | VESD (HBM) | -8 | 8 | kV | I/O, RST, VCC, CLK, PRES pins | 10 | |
| Human body model, all other pins | VESD (HBM) | -2 | 2 | kV | all other pins | 10 | |
| Machine model, all pins | VESD (MM) | -200 | 200 | V | all pins | 10 | |
| Field charged device model, all pins | VESD (FCDM) | -500 | 500 | V | all pins | 10 | |
| Total power dissipation | PTOT | 0.25 | W | TA = -25 to +85 °C | 10 | ||
| Maximum operating junction temperature | TJ(MAX) | 125 | °C | 10 | |||
| Storage temperature range | TSTG | -55 | 150 | °C | 10 | ||
| Supply current, logic, shutdown mode | IDD | 35 | µA | Shutdown mode | 11 | ||
| Supply current, logic, deep shutdown mode | IDD | 12 | µA | Deep shutdown mode | 11 | ||
| Supply current, logic, active mode | IDD | 2 | mA | Active mode | 11 | ||
| Supply current, power, shutdown mode | IDDP | 5 | µA | Shutdown mode, fXTAL stopped | 11 | ||
| Supply current, power, active mode | IDDP | 1.5 | mA | Active mode, fCLK = fXTAL/2, no ICC load | 11 | ||
| Supply current, power, active mode with card load | IDDP | 70 | mA | Active mode, fCLK = fXTAL/2, ICC = 65 mA | 11 | ||
| Supply current, interface, shutdown mode | IDD(INTF) | 6 | µA | Shutdown mode | 11 | ||
| Supply current, interface, active mode | IDD(INTF) | 2 | mA | Active mode | 11 | ||
| Card supply voltage (output) | VCC | 4.75 | 5 | 5.25 | V | Active mode, VCC = 5 V, ICC < 65 mA | 11 |
| Card supply voltage (output) with current pulses | VCC | 4.65 | 5 | 5.25 | V | With current pulses of 40 nAs at ICC < 200 mA, t < 400 ns | 11 |
| Card supply voltage (output) | VCC | 2.85 | 3.05 | 3.15 | V | Active mode, VCC = 3 V, ICC < 65 mA | 11 |
| Card supply voltage (output) with current pulses | VCC | 2.76 | 3.2 | V | With current pulses of 40 nAs at ICC < 200 mA, t < 400 ns | 11 | |
| Card supply voltage (output) | VCC | 1.71 | 1.83 | 1.89 | V | Active mode, VCC = 1.8 V, ICC < 65 mA | 11 |
| Card supply voltage (output) with current pulses | VCC | 1.66 | 1.94 | V | With current pulses of 15 nAs at ICC < 200 mA, t < 400 ns | 11 | |
| Card supply current | ICC | 65 | mA | VCC = 5 V, 3 V or 1.8 V | 11 | ||
| Card supply current, VCC shorted | ICC | 90 | 120 | 150 | mA | VCC shorted to GND | 11 |
| VCC decoupling capacitor | CVCC | 160 | 320 | 530 | nF | VCC to GND | 11 |
| VCC slew rate (rising or falling) | SR | 0.055 | 0.18 | 0.3 | V/µs | VCC = 5 V | 11 |
| VCC slew rate (rising or falling) | SR | 0.04 | 0.18 | 0.3 | V/µs | VCC = 3 V | 11 |
| VCC slew rate (rising or falling) | SR | 0.025 | 0.18 | 0.3 | V/µs | VCC = 1.8 V | 11 |
| VCC output voltage in shutdown mode | VCC(SHDN) | -0.1 | 0.1 | V | No load | 12 | |
| VCC output voltage in shutdown mode | VCC(SHDN) | -0.1 | 0.3 | V | ICC = 1 mA | 12 | |
| Falling supply voltage threshold | VTH | 2.3 | 2.4 | 2.5 | V | VDD pin | 12 |
| Falling supply voltage threshold | VTH | 3 | 4.1 | 4.4 | V | VDDP pin (VCC = 5 V) | 12 |
| Falling supply voltage threshold | VTH | 1.2 | 1.24 | 1.29 | V | PORADJ pin | 12 |
| Hysteresis on supply voltage threshold | VHYS | 50 | 100 | 150 | mV | VDD pin | 12 |
| Hysteresis on supply voltage threshold | VHYS | 100 | 200 | 350 | mV | VDDP pin (VCC = 5 V) | 12 |
| Hysteresis on supply voltage threshold | VHYS | 10 | 20 | 30 | mV | PORADJ pin | 12 |
| Input current, PORADJ pin | II(PORADJ) | -1 | 1 | µA | 12 | ||
| Power-on or undervoltage reset pulse width (minimum) | tW | 5.1 | 8 | 10.2 | ms | 12 | |
| Clock frequency on pin CLK | fCLK | 0 | 20 | MHz | Operational | 14 | |
| Duty cycle | DC | 45 | 55 | % | CL = 30 pF | 14 | |
| Pull-up resistance to VCC (I/O, AUX1, AUX2) | RPU | 7 | 9 | 11 | kΩ | 13 | |
| Pull-up current (one-shot circuit active) | IPU | -8 | -6 | -4 | mA | VOH = 0.9 VCC | 13 |
| Internal oscillator frequency, shutdown mode | fOSC(INT)LOW | 100 | 150 | 200 | kHz | Shutdown mode | 17 |
| Activation time | tACT | 2090 | 4160 | 4160 | µs | See Figure 10 | 18 |
| Deactivation time | tDEACT | 35 | 90 | 250 | µs | See Figure 11 | 18 |
| Thermal resistance junction-ambient | RTHJA | 47 | °C/W | multilayer test board - JEDEC standard | 10 |
CAD (KiCad official)
- Symbol:
ST8034HNQR - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
st8034hnqr-etched.step/st8034hnqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st8034hnqr.step/st8034hnqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (31 pp, sha256
c150fd0f912710cf, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).