component
ST3485EIYDT
Public Made by Adomby adom
STMicroelectronics RS-485 / RS-422 ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownST3485EIYDT
STMicroelectronics · RS-485 / RS-422 ICs · SOIC-8
ST3485EIYDT from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | tri_state | Receiver output, high if A > B by 200 mV, low if A < B by 200 mV, high impedance when RE is high. |
| 2 | RE | input | Receiver output enable (active low); RO is high impedance when RE is high and device enters shutdown when RE is high and DE is low. |
| 3 | DE | input | Driver output enable (active high); driver outputs are high impedance when DE is low and device enters shutdown when DE is low and RE is high. |
| 4 | DI | input | Driver input; low on DI forces output A low and output B high, high on DI forces output A high and output B low. |
| 5 | GND | power_in | Ground reference. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output. |
| 8 | VCC | power_in | Supply voltage with range 3.0 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ST3485EIYDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
st3485eiydt-etched.step/st3485eiydt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st3485eiydt.step/st3485eiydt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (23 pp, sha256
b3967fe077540e0e, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).