component
ST3485EIDT
Public Made by Adomby adom
STMicroelectronics RS-485 / RS-422 ICs, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownST3485EIDT
STMicroelectronics · RS-485 / RS-422 ICs · SO-8
ST3485EIDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | tri_state | Receiver output; high when A > B by ≥200 mV, low when A < B by ≤200 mV, high-impedance when RE is high. |
| 2 | RE | input | Receiver enable; when low enables receiver output, when high places output in high-impedance. |
| 3 | DE | input | Driver enable; when high enables driver outputs, when low places outputs in high-impedance. |
| 4 | DI | input | Driver input; low forces A low and B high, high forces A high and B low. |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Non-inverting differential signal line; receiver input and driver output. |
| 7 | B | bidirectional | Inverting differential signal line; receiver input and driver output. |
| 8 | VCC | power_in | Supply voltage, 3 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ST3485EIDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
st3485eidt-etched.step/st3485eidt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st3485eidt.step/st3485eidt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (24 pp, sha256
ae974ab5146382f0, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).