main
Ray Set visibility: public 637aee3
{
  "schema_version": 1,
  "type": "component",
  "slug": "st3243cpr",
  "title": "ST3243CPR",
  "brief": "STMicroelectronics RS232 ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "st3243cpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ST3243CPR",
    "manufacturer": "STMicroelectronics",
    "package": "SSOP-28",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590224496411250688",
    "parts": {
      "symbol": "st3243cpr.kicad_sym",
      "footprint": "st3243cpr.kicad_mod",
      "model_3d": "st3243cpr-hero.glb",
      "model_3d_plain": "st3243cpr.glb",
      "model_3d_step": "st3243cpr-etched.step",
      "model_3d_step_plain": "st3243cpr.step",
      "lbr": "st3243cpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C283495",
      "digikey": "497-3732-2-ND",
      "mouser": "511-ST3243CP"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T23:09:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-3732-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-ST3243CP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the inverting charge pump capacitor."
      },
      {
        "number": "2",
        "name": "C2-",
        "type": "passive",
        "description": "Negative terminal of the inverting charge pump capacitor."
      },
      {
        "number": "3",
        "name": "V-",
        "type": "power_out",
        "description": "Inverted voltage of -5.5 V generated by the charge pump."
      },
      {
        "number": "4",
        "name": "R1IN",
        "type": "input",
        "description": "First RS-232 receiver input, accepting a voltage range of ±25 V."
      },
      {
        "number": "5",
        "name": "R2IN",
        "type": "input",
        "description": "Second RS-232 receiver input, accepting a voltage range of ±25 V."
      },
      {
        "number": "6",
        "name": "R3IN",
        "type": "input",
        "description": "Third RS-232 receiver input, accepting a voltage range of ±25 V."
      },
      {
        "number": "7",
        "name": "R4IN",
        "type": "input",
        "description": "Fourth RS-232 receiver input, accepting a voltage range of ±25 V."
      },
      {
        "number": "8",
        "name": "R5IN",
        "type": "input",
        "description": "Fifth RS-232 receiver input, accepting a voltage range of ±25 V."
      },
      {
        "number": "9",
        "name": "T1OUT",
        "type": "output",
        "description": "First RS-232 transmitter output, swinging ±5 V minimum into a 3 kΩ load to GND."
      },
      {
        "number": "10",
        "name": "T2OUT",
        "type": "output",
        "description": "Second RS-232 transmitter output, swinging ±5 V minimum into a 3 kΩ load to GND."
      },
      {
        "number": "11",
        "name": "T3OUT",
        "type": "output",
        "description": "Third RS-232 transmitter output, swinging ±5 V minimum into a 3 kΩ load to GND."
      },
      {
        "number": "12",
        "name": "T3IN",
        "type": "input",
        "description": "Third transmitter logic input (TTL/CMOS level), with a maximum input voltage of 6 V."
      },
      {
        "number": "13",
        "name": "T2IN",
        "type": "input",
        "description": "Second transmitter logic input (TTL/CMOS level), with a maximum input voltage of 6 V."
      },
      {
        "number": "14",
        "name": "T1IN",
        "type": "input",
        "description": "First transmitter logic input (TTL/CMOS level), with a maximum input voltage of 6 V."
      },
      {
        "number": "15",
        "name": "R5OUT",
        "type": "output",
        "description": "Fifth receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V."
      },
      {
        "number": "16",
        "name": "R4OUT",
        "type": "output",
        "description": "Fourth receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V."
      },
      {
        "number": "17",
        "name": "R3OUT",
        "type": "output",
        "description": "Third receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V."
      },
      {
        "number": "18",
        "name": "R2OUT",
        "type": "output",
        "description": "Second receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V."
      },
      {
        "number": "19",
        "name": "R1OUT",
        "type": "output",
        "description": "First receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V."
      },
      {
        "number": "20",
        "name": "R2OUTB",
        "type": "output",
        "description": "Non-inverting complementary receiver output of R2, always active to provide the serial port wake-up function."
      },
      {
        "number": "21",
        "name": "INVALID",
        "type": "output",
        "description": "Output of the valid signal detector; logic 1 indicates a valid RS-232 level is present on the receiver inputs."
      },
      {
        "number": "22",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Drive low to shut down the transmitters and the on-board power supply, overriding all automatic circuitry and FORCEON."
      },
      {
        "number": "23",
        "name": "FORCEON",
        "type": "input",
        "description": "Drive high to override the automatic circuitry and keep the transmitters on; FORCEOFF must be high."
      },
      {
        "number": "24",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal of the voltage charge pump capacitor."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "26",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, specified for operation from 3 V to 5.5 V (absolute maximum 6 V)."
      },
      {
        "number": "27",
        "name": "V+",
        "type": "power_out",
        "description": "Doubled voltage of 5.5 V generated by the charge pump."
      },
      {
        "number": "28",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the voltage charge pump capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Figure 1 (pin configuration diagram) is an image with no text layer, so the pin numbers were taken f; The datasheet text does not give a pin-level description for GND beyond 'Ground', so the GND descrip; Table 2 prints V- as '- 5.5 V' and V+ as '5.5 V'; the descriptions above reflect that printed value."
        ],
        "pages_sent": 18,
        "cost_usd": 0.0543,
        "at": "2026-10-11T23:08:42"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590224496411250688",
        "pages": 18,
        "sha256": "1bacb0a9b33761de",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "st3243cpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "st3243cpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "90342f677e2f80cd67edaa8c0915716cee919bf1cf29736cc6f700f769b52b33",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "SSOP-28",
      "Category": "Interface",
      "Pins": "28"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "st3243cpr"
  ],
  "discovery_pitch": "ST3243CPR (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "st3243cpr.kicad_sym",
    "st3243cpr.kicad_mod",
    "st3243cpr.glb",
    "st3243cpr.step",
    "st3243cpr.lbr",
    "docs/hero.png",
    "docs/st3243cpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "st3243cpr-hero.glb",
    "st3243cpr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}