main
Ray
Publish 0.1.0
ab9fae9
ST3232BDR-HXY
HXY MOSFET · RS232 ICs · SOP-16
ST3232BDR-HXY from HXY MOSFET, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the first charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 2 | V+ | power_out | Doubled-voltage charge-pump output that sets the transmitter high level; the absolute maximum table lists the transmitter high output voltage as VCC-0.3 V with no maximum given in the extracted text. |
| 3 | C1- | passive | Negative terminal of the first charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 4 | C2+ | passive | Positive terminal of the second charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 5 | C2- | passive | Negative terminal of the second charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 6 | V- | power_out | Inverted charge-pump output that sets the transmitter low level; the absolute maximum range is -0.3 V to -14 V. |
| 7 | T2OUT | output | RS-232 transmitter 2 output with a minimum ±5 V swing into a 3 kΩ load to GND and an absolute voltage range of -13.2 V to +12.2 V. |
| 8 | R2IN | input | RS-232 receiver 2 input rated for a ±25 V operating range, with typical input resistance of 5 kΩ (3 to 7 kΩ). |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output with VOL of 0.4 V max at 1.6 mA and VOH of VCC-0.6 V min at -1 mA. |
| 10 | T2IN | input | TTL/CMOS transmitter 2 logic input with an input logic threshold low of 0.8 V max and an absolute range of -0.3 V to V+ + 6 V. |
| 11 | T1IN | input | TTL/CMOS transmitter 1 logic input with an input logic threshold low of 0.8 V max and an absolute range of -0.3 V to V+ + 6 V. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output with VOL of 0.4 V max at 1.6 mA and VOH of VCC-0.6 V min at -1 mA. |
| 13 | R1IN | input | RS-232 receiver 1 input rated for a ±25 V operating range, with typical input resistance of 5 kΩ (3 to 7 kΩ). |
| 14 | T1OUT | output | RS-232 transmitter 1 output with a minimum ±5 V swing into a 3 kΩ load to GND and an absolute voltage range of -13.2 V to +12.2 V. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage with an absolute maximum range of -0.3 V to 6.0 V; electrical characteristics are specified at VCC = 3.3 V and 5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-16 |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.3 | 6 | V | 3 | ||
| Transmitter Low Output Voltage | V- | -0.3 | -14 | V | 3 | ||
| Transmitter Input Voltage | VTIN | -0.3 | V | 3 | |||
| Receiver Input Voltage | VRIN | -25 | 25 | V | 3 | ||
| Voltage Applied to Receiver Output | VROUT | -0.3 | V | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Power supply current | ISUPPLY | 0.3 | 1 | mA | No load, VCC = 3V or 5V | 3 | |
| Input logic threshold low | VTIL | 0.8 | V | 3 | |||
| Input logic threshold high | VTIH | 2 | V | VCC = 3.3 V | 3 | ||
| Input logic threshold high | VTIH | 2.4 | V | VCC = 5 V | 3 | ||
| Input leakage current T-IN | IIL | -1 | 1 | 3 | |||
| ESD protection, Human-Body Model (DOUT, RIN) | -15 | 15 | kV | Pins DOUT, RIN; human-body model | 3 | ||
| ESD protection, IEC 1000-4-2 contact discharge (DOUT, RIN) | -8 | 8 | kV | Pins DOUT, RIN; IEC-1000-4-2 contact discharge | 3 | ||
| RS-232 input threshold low | VRIL | 0.6 | 1.1 | V | TA = 25 °C, VCC = 3.3 V | 4 | |
| RS-232 input threshold low | VRIL | 0.8 | 1.5 | V | TA = 25 °C, VCC = 5 V | 4 | |
| RS-232 input threshold high | VRIH | 1.4 | 2.4 | V | TA = 25 °C, VCC = 3.3 V | 4 | |
| RS-232 input threshold high | VRIH | 1.8 | 2.4 | V | TA = 25 °C, VCC = 5 V | 4 | |
| Input resistance | RRIN | 3 | 5 | 7 | kΩ | TA = 25 °C | 4 |
| TTL/CMOS Output voltage low | VROL | 0.4 | V | IOUT = 1.6 mA | 4 | ||
| Data transfer rate | DR | 250 | kbps | RL = 3 kΩ, CL = 1000 pF, one transmitter switching | 4 | ||
| Propagation delay input to output | tPHLR / tPLHR | 0.15 | µs | RXIN = RXOUT, CL = 150 pF | 4 | ||
| Receiver output enable time | tOER | 50 | ns | Normal operation | 4 | ||
| Receiver output disable time | tODR | 50 | ns | Normal operation | 4 | ||
| Transmitter propagation delay difference | /tPHLT - tTHL/ | 200 | ns | Transmitter skew measured at zero-cross points | 4 | ||
| Receiver propagation delay difference | /tPHLR - tTHR/ | 50 | ns | 4 | |||
| Transition slew rate | SRT | 6 | V/µs | TA = 25 °C, RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF | 4 | ||
| Transition slew rate | SRT | 4 | V/µs | TA = 25 °C, RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 2500 pF | 4 | ||
| Transition slew rate | SRT | 30 | V/µs | TA = 25 °C, RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF | 4 | ||
| Output voltage swing | VTOUT | -5 | 5 | V | All transmitter outputs loaded with 3 kΩ to GND | 4 | |
| Transmitter output resistance | RTOUT | 300 | Ω | 4 | |||
| Output short-circuit current | ISC | -60 | 60 | mA | 4 | ||
| Output leakage current | ITOL | -25 | 25 | uA | VCC = 0 V or 3.3 V or 5.5 V, VCC=±12 V | 4 | |
| Transmitter input hysteresis | VHYS | 0.25 | V | 3 | |||
| Receiver input hysteresis | VRIHYS | 0.5 | V | 4 | |||
| Output voltage swing | VTOUT | 5.4 | V | All transmitter outputs loaded with 3 kΩ to GND | 4 | ||
| Thermal resistance junction-to-case | Rth-jc | 30 | °C/W | Typical value | 3 | ||
| Thermal resistance junction-to-ambient | Rth-ja | 95 | °C/W | Typical value | 3 |
CAD (KiCad official)
- Symbol:
ST3232BDR-HXY - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
st3232bdr-hxy-etched.step/st3232bdr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st3232bdr-hxy.step/st3232bdr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
a23c9e7abeccd061, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ST3232BDR-HXY
**HXY MOSFET** · RS232 ICs · SOP-16
ST3232BDR-HXY from HXY MOSFET, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the first charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 2 | V+ | power_out | Doubled-voltage charge-pump output that sets the transmitter high level; the absolute maximum table lists the transmitter high output voltage as VCC-0.3 V with no maximum given in the extracted text. |
| 3 | C1- | passive | Negative terminal of the first charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 4 | C2+ | passive | Positive terminal of the second charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 5 | C2- | passive | Negative terminal of the second charge-pump capacitor, which the datasheet does not give a value for in this text. |
| 6 | V- | power_out | Inverted charge-pump output that sets the transmitter low level; the absolute maximum range is -0.3 V to -14 V. |
| 7 | T2OUT | output | RS-232 transmitter 2 output with a minimum ±5 V swing into a 3 kΩ load to GND and an absolute voltage range of -13.2 V to +12.2 V. |
| 8 | R2IN | input | RS-232 receiver 2 input rated for a ±25 V operating range, with typical input resistance of 5 kΩ (3 to 7 kΩ). |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output with VOL of 0.4 V max at 1.6 mA and VOH of VCC-0.6 V min at -1 mA. |
| 10 | T2IN | input | TTL/CMOS transmitter 2 logic input with an input logic threshold low of 0.8 V max and an absolute range of -0.3 V to V+ + 6 V. |
| 11 | T1IN | input | TTL/CMOS transmitter 1 logic input with an input logic threshold low of 0.8 V max and an absolute range of -0.3 V to V+ + 6 V. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output with VOL of 0.4 V max at 1.6 mA and VOH of VCC-0.6 V min at -1 mA. |
| 13 | R1IN | input | RS-232 receiver 1 input rated for a ±25 V operating range, with typical input resistance of 5 kΩ (3 to 7 kΩ). |
| 14 | T1OUT | output | RS-232 transmitter 1 output with a minimum ±5 V swing into a 3 kΩ load to GND and an absolute voltage range of -13.2 V to +12.2 V. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage with an absolute maximum range of -0.3 V to 6.0 V; electrical characteristics are specified at VCC = 3.3 V and 5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-16 |
| Category | Communication Interface Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.3 | | 6 | V | | 3 |
| Transmitter Low Output Voltage | V- | -0.3 | | -14 | V | | 3 |
| Transmitter Input Voltage | VTIN | -0.3 | | | V | | 3 |
| Receiver Input Voltage | VRIN | -25 | | 25 | V | | 3 |
| Voltage Applied to Receiver Output | VROUT | -0.3 | | | V | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Power supply current | ISUPPLY | | 0.3 | 1 | mA | No load, VCC = 3V or 5V | 3 |
| Input logic threshold low | VTIL | | | 0.8 | V | | 3 |
| Input logic threshold high | VTIH | 2 | | | V | VCC = 3.3 V | 3 |
| Input logic threshold high | VTIH | 2.4 | | | V | VCC = 5 V | 3 |
| Input leakage current T-IN | IIL | -1 | | 1 | | | 3 |
| ESD protection, Human-Body Model (DOUT, RIN) | | -15 | | 15 | kV | Pins DOUT, RIN; human-body model | 3 |
| ESD protection, IEC 1000-4-2 contact discharge (DOUT, RIN) | | -8 | | 8 | kV | Pins DOUT, RIN; IEC-1000-4-2 contact discharge | 3 |
| RS-232 input threshold low | VRIL | 0.6 | 1.1 | | V | TA = 25 °C, VCC = 3.3 V | 4 |
| RS-232 input threshold low | VRIL | 0.8 | 1.5 | | V | TA = 25 °C, VCC = 5 V | 4 |
| RS-232 input threshold high | VRIH | 1.4 | 2.4 | | V | TA = 25 °C, VCC = 3.3 V | 4 |
| RS-232 input threshold high | VRIH | 1.8 | 2.4 | | V | TA = 25 °C, VCC = 5 V | 4 |
| Input resistance | RRIN | 3 | 5 | 7 | kΩ | TA = 25 °C | 4 |
| TTL/CMOS Output voltage low | VROL | | | 0.4 | V | IOUT = 1.6 mA | 4 |
| Data transfer rate | DR | 250 | | | kbps | RL = 3 kΩ, CL = 1000 pF, one transmitter switching | 4 |
| Propagation delay input to output | tPHLR / tPLHR | | | 0.15 | µs | RXIN = RXOUT, CL = 150 pF | 4 |
| Receiver output enable time | tOER | | | 50 | ns | Normal operation | 4 |
| Receiver output disable time | tODR | | | 50 | ns | Normal operation | 4 |
| Transmitter propagation delay difference | /tPHLT - tTHL/ | | | 200 | ns | Transmitter skew measured at zero-cross points | 4 |
| Receiver propagation delay difference | /tPHLR - tTHR/ | | | 50 | ns | | 4 |
| Transition slew rate | SRT | 6 | | | V/µs | TA = 25 °C, RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF | 4 |
| Transition slew rate | SRT | 4 | | | V/µs | TA = 25 °C, RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 2500 pF | 4 |
| Transition slew rate | SRT | | | 30 | V/µs | TA = 25 °C, RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF | 4 |
| Output voltage swing | VTOUT | -5 | | 5 | V | All transmitter outputs loaded with 3 kΩ to GND | 4 |
| Transmitter output resistance | RTOUT | 300 | | | Ω | | 4 |
| Output short-circuit current | ISC | -60 | | 60 | mA | | 4 |
| Output leakage current | ITOL | -25 | | 25 | uA | VCC = 0 V or 3.3 V or 5.5 V, VCC=±12 V | 4 |
| Transmitter input hysteresis | VHYS | | 0.25 | | V | | 3 |
| Receiver input hysteresis | VRIHYS | | 0.5 | | V | | 4 |
| Output voltage swing | VTOUT | | 5.4 | | V | All transmitter outputs loaded with 3 kΩ to GND | 4 |
| Thermal resistance junction-to-case | Rth-jc | | 30 | | °C/W | Typical value | 3 |
| Thermal resistance junction-to-ambient | Rth-ja | | 95 | | °C/W | Typical value | 3 |
## CAD (KiCad official)
- Symbol: `ST3232BDR-HXY`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `st3232bdr-hxy-etched.step` / `st3232bdr-hxy-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `st3232bdr-hxy.step` / `st3232bdr-hxy.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/st3232bdr-hxy-datasheet.pdf) (8 pp, sha256 `a23c9e7abeccd061`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/st3232bdr-hxy-datasheet.pdf)