main
Ray
Publish 0.1.0
bcaf7ab
ST25DV64KC-IE8S3
STMicroelectronics · RFID ICs · SO-8
ST25DV64KC-IE8S3 from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V_EH | power_out | Energy harvesting analog output pin used to power external components. |
| 2 | AC0 | passive | Antenna coil connection AC0 for the contactless RF interface. |
| 3 | AC1 | passive | Antenna coil connection AC1 for the contactless RF interface. |
| 4 | VSS | power_in | Ground reference pin of the device. |
| 5 | SDA | bidirectional | Serial data I/O of the two-wire I2C interface. |
| 6 | SCL | input | Serial clock input of the two-wire I2C interface, supporting 1 MHz protocol. |
| 7 | GPO | output | Interrupt output, open drain on this SO8N version, which requires an external pull-up to recover the high level. |
| 8 | VCC | power_in | Supply voltage pin, with a single supply range of 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | RF And Wireless |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature, RF interface (SO8N, TSSOP8) | TA | -40 | 105 | °C | Range 8, SO8N and TSSOP RF interface | 141 | |
| Ambient operating temperature, I2C interface (SO8N, TSSOP8) | TA | -40 | 125 | °C | Range 8, SO8N and TSSOP I2C interface | 141 | |
| Storage temperature | TSTG | -65 | 150 | °C | UFDFPN8, SO8N, TSSOP8, UFDFPN12, WLCSP10 | 141 | |
| I2C input or output range | VIO | -0.5 | 6.5 | V | 141 | ||
| I2C supply voltage | VCC | -0.5 | 6.5 | V | 141 | ||
| DC output current on pin SDA (when equal to 0) | IOL_MAX_SDA | 5 | mA | 141 | |||
| DC output current on pin GPO (when equal to 0) | IOL_MAX_GPO | 1.5 | mA | 141 | |||
| RF input voltage amplitude peak to peak between AC0 and AC1 | VMAX_1 | 11 | V | VSS pin left floating | 141 | ||
| AC voltage between AC0 and VSS, or AC1 and VSS | VMAX_2 | -0.5 | 5.5 | V | VAC0 - VSS or VAC1 - VSS | 141 | |
| Electrostatic discharge voltage (human body model) | VESD | 2000 | V | All pins | 141 | ||
| Supply voltage | VCC | 1.8 | 5.5 | V | I2C operating conditions | 142 | |
| Ambient operating temperature, SO8N and TSSOP8 | TA | -40 | 125 | °C | Range 8, SO8N, TSSOP8 | 142 | |
| Input capacitance (SDA) | CIN | 8 | pF | 142 | |||
| Input capacitance (other pins) | CIN | 6 | pF | 142 | |||
| Pulse width ignored (Input filter on SCL and SDA) | tNS | 80 | ns | Evaluated by characterization | 142 | ||
| Input leakage current (SCL, SDA) | ILI | -0.1 | 0.03 | 0.1 | µA | VIN = VSS or VCC, device in Standby mode | 144 |
| Input leakage current (LPD) | ILI | -0.5 | 0.1 | 0.5 | µA | VIN = VSS, device in Standby mode | 144 |
| Output leakage current (SDA) | ILO | -0.1 | 0.03 | 0.1 | µA | SDA in Hi-Z, external voltage applied on SDA: VSS or VCC | 144 |
| Operating supply current (device select E2 address) read | ICC_E2 | 126 | 180 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select E2 address) read | ICC_E2 | 230 | 260 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select E2 address) read | ICC_E2 | 510 | 550 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select MB address) read | ICC_MB | 126 | 180 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select MB address) read | ICC_MB | 230 | 260 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select MB address) read | ICC_MB | 510 | 550 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select E2 address) write | ICC0 | 120 | 220 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select E2 address) write | ICC0 | 120 | 230 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select E2 address) write | ICC0 | 140 | 260 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select MB address) write | ICC0_MB | 180 | 220 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 | |
| Operating supply current (device select MB address) write | ICC0_MB | 290 | 320 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 145 | |
| Operating supply current (device select MB address) write | ICC0_MB | 520 | 600 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 145 | |
| Low power down supply current | ICC1 | 2.5 | 5 | µA | LPD = 1, VCC = 1.8 V | 145 | |
| Low power down supply current | ICC1 | 3 | 6 | µA | LPD = 1, VCC = 3.3 V | 145 | |
| Low power down supply current | ICC1 | 4 | 7 | µA | LPD = 1, VCC = 5.5 V | 145 | |
| Static Standby supply current after power ON or device select stop or time out | ICC1_PON | 78 | 110 | µA | LPD = 0, VCC = 1.8 V | 145 | |
| Static Standby supply current after power ON or device select stop or time out | ICC1_PON | 82 | 110 | µA | LPD = 0, VCC = 3.3 V | 145 | |
| Static Standby supply current after power ON or device select stop or time out | ICC1_PON | 95 | 130 | µA | LPD = 0, VCC = 5.5 V | 145 | |
| Output low voltage SDA (1 MHz) | VOL_SDA | 0.05 | 0.4 | V | IOL = 1 mA, VCC = 1.8 V | 145 | |
| Output low voltage SDA (1 MHz) | VOL_SDA | 0.08 | 0.4 | V | IOL = 2.1 mA, VCC = 3.3 V | 145 | |
| Output low voltage SDA (1 MHz) | VOL_SDA | 0.1 | 0.4 | V | IOL = 3 mA, VCC = 5.5 V | 145 | |
| Device Select Acknowledge | VCC_Power_up | 1.48 | 1.7 | V | fC = 100 KHz | 145 | |
| Output low voltage (GPO CMOS) | VOL_GPO_CMOS | 0.4 | V | VDCG = 1.8 V, IOL = 0.5 mA | 149 | ||
| Output low voltage (GPO open drain) | VOL_GPO_OD | 0.28 | 0.4 | V | IOL = 1 mA, VCC = 1.8 V | 149 | |
| Operating field according to ISO, 10% carrier modulation index | MI | 10 | 30 | % | MI=(A-B)/(A+B), 150 mA/m > H_ISO > 1000 mA/m | 150 | |
| Internal tuning capacitor | CTUN | 28.5 | pF | f = 13.56 MHz | 150 | ||
| Thermal resistance junction-ambient SO8N 4.9 x 6 mm, 1.27 mm pitch package | ƟJA | 219 | °C/W | Jedec JESD51-7 2s2p board | 151 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Grey color indicates the states where power is delivered on V_EH pin. | 50 |
CAD (KiCad official)
- Symbol:
ST25DV64KC-IE8S3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
st25dv64kc-ie8s3-etched.step/st25dv64kc-ie8s3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st25dv64kc-ie8s3.step/st25dv64kc-ie8s3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (203 pp, sha256
658ee2be335a01b3, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ST25DV64KC-IE8S3
**STMicroelectronics** · RFID ICs · SO-8
ST25DV64KC-IE8S3 from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V_EH | power_out | Energy harvesting analog output pin used to power external components. |
| 2 | AC0 | passive | Antenna coil connection AC0 for the contactless RF interface. |
| 3 | AC1 | passive | Antenna coil connection AC1 for the contactless RF interface. |
| 4 | VSS | power_in | Ground reference pin of the device. |
| 5 | SDA | bidirectional | Serial data I/O of the two-wire I2C interface. |
| 6 | SCL | input | Serial clock input of the two-wire I2C interface, supporting 1 MHz protocol. |
| 7 | GPO | output | Interrupt output, open drain on this SO8N version, which requires an external pull-up to recover the high level. |
| 8 | VCC | power_in | Supply voltage pin, with a single supply range of 1.8 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | RF And Wireless |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature, RF interface (SO8N, TSSOP8) | TA | -40 | | 105 | °C | Range 8, SO8N and TSSOP RF interface | 141 |
| Ambient operating temperature, I2C interface (SO8N, TSSOP8) | TA | -40 | | 125 | °C | Range 8, SO8N and TSSOP I2C interface | 141 |
| Storage temperature | TSTG | -65 | | 150 | °C | UFDFPN8, SO8N, TSSOP8, UFDFPN12, WLCSP10 | 141 |
| I2C input or output range | VIO | -0.5 | | 6.5 | V | | 141 |
| I2C supply voltage | VCC | -0.5 | | 6.5 | V | | 141 |
| DC output current on pin SDA (when equal to 0) | IOL_MAX_SDA | | | 5 | mA | | 141 |
| DC output current on pin GPO (when equal to 0) | IOL_MAX_GPO | | | 1.5 | mA | | 141 |
| RF input voltage amplitude peak to peak between AC0 and AC1 | VMAX_1 | | | 11 | V | VSS pin left floating | 141 |
| AC voltage between AC0 and VSS, or AC1 and VSS | VMAX_2 | -0.5 | | 5.5 | V | VAC0 - VSS or VAC1 - VSS | 141 |
| Electrostatic discharge voltage (human body model) | VESD | | | 2000 | V | All pins | 141 |
| Supply voltage | VCC | 1.8 | | 5.5 | V | I2C operating conditions | 142 |
| Ambient operating temperature, SO8N and TSSOP8 | TA | -40 | | 125 | °C | Range 8, SO8N, TSSOP8 | 142 |
| Input capacitance (SDA) | CIN | | | 8 | pF | | 142 |
| Input capacitance (other pins) | CIN | | | 6 | pF | | 142 |
| Pulse width ignored (Input filter on SCL and SDA) | tNS | | | 80 | ns | Evaluated by characterization | 142 |
| Input leakage current (SCL, SDA) | ILI | -0.1 | 0.03 | 0.1 | µA | VIN = VSS or VCC, device in Standby mode | 144 |
| Input leakage current (LPD) | ILI | -0.5 | 0.1 | 0.5 | µA | VIN = VSS, device in Standby mode | 144 |
| Output leakage current (SDA) | ILO | -0.1 | 0.03 | 0.1 | µA | SDA in Hi-Z, external voltage applied on SDA: VSS or VCC | 144 |
| Operating supply current (device select E2 address) read | ICC_E2 | | 126 | 180 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select E2 address) read | ICC_E2 | | 230 | 260 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select E2 address) read | ICC_E2 | | 510 | 550 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select MB address) read | ICC_MB | | 126 | 180 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select MB address) read | ICC_MB | | 230 | 260 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select MB address) read | ICC_MB | | 510 | 550 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select E2 address) write | ICC0 | | 120 | 220 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select E2 address) write | ICC0 | | 120 | 230 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select E2 address) write | ICC0 | | 140 | 260 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select MB address) write | ICC0_MB | | 180 | 220 | µA | VCC = 1.8 V, fC = 1MHz (rise/fall time < 50 ns) | 144 |
| Operating supply current (device select MB address) write | ICC0_MB | | 290 | 320 | µA | VCC = 3.3 V, fC = 1MHz (rise/fall time < 50 ns) | 145 |
| Operating supply current (device select MB address) write | ICC0_MB | | 520 | 600 | µA | VCC = 5.5 V, fC = 1MHz (rise/fall time < 50 ns) | 145 |
| Low power down supply current | ICC1 | | 2.5 | 5 | µA | LPD = 1, VCC = 1.8 V | 145 |
| Low power down supply current | ICC1 | | 3 | 6 | µA | LPD = 1, VCC = 3.3 V | 145 |
| Low power down supply current | ICC1 | | 4 | 7 | µA | LPD = 1, VCC = 5.5 V | 145 |
| Static Standby supply current after power ON or device select stop or time out | ICC1_PON | | 78 | 110 | µA | LPD = 0, VCC = 1.8 V | 145 |
| Static Standby supply current after power ON or device select stop or time out | ICC1_PON | | 82 | 110 | µA | LPD = 0, VCC = 3.3 V | 145 |
| Static Standby supply current after power ON or device select stop or time out | ICC1_PON | | 95 | 130 | µA | LPD = 0, VCC = 5.5 V | 145 |
| Output low voltage SDA (1 MHz) | VOL_SDA | | 0.05 | 0.4 | V | IOL = 1 mA, VCC = 1.8 V | 145 |
| Output low voltage SDA (1 MHz) | VOL_SDA | | 0.08 | 0.4 | V | IOL = 2.1 mA, VCC = 3.3 V | 145 |
| Output low voltage SDA (1 MHz) | VOL_SDA | | 0.1 | 0.4 | V | IOL = 3 mA, VCC = 5.5 V | 145 |
| Device Select Acknowledge | VCC_Power_up | | 1.48 | 1.7 | V | fC = 100 KHz | 145 |
| Output low voltage (GPO CMOS) | VOL_GPO_CMOS | | | 0.4 | V | VDCG = 1.8 V, IOL = 0.5 mA | 149 |
| Output low voltage (GPO open drain) | VOL_GPO_OD | | 0.28 | 0.4 | V | IOL = 1 mA, VCC = 1.8 V | 149 |
| Operating field according to ISO, 10% carrier modulation index | MI | 10 | | 30 | % | MI=(A-B)/(A+B), 150 mA/m > H_ISO > 1000 mA/m | 150 |
| Internal tuning capacitor | CTUN | | 28.5 | | pF | f = 13.56 MHz | 150 |
| Thermal resistance junction-ambient SO8N 4.9 x 6 mm, 1.27 mm pitch package | ƟJA | | 219 | | °C/W | Jedec JESD51-7 2s2p board | 151 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | | Grey color indicates the states where power is delivered on V_EH pin. | 50 |
## CAD (KiCad official)
- Symbol: `ST25DV64KC-IE8S3`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `st25dv64kc-ie8s3-etched.step` / `st25dv64kc-ie8s3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `st25dv64kc-ie8s3.step` / `st25dv64kc-ie8s3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/st25dv64kc-ie8s3.pdf) (203 pp, sha256 `658ee2be335a01b3`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/st25dv64kc-ie8s3-datasheet.pdf)