component
ST25DV16KC-IE6S3
Public Made by Adomby adom
STMicroelectronics RFID ICs, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownST25DV16KC-IE6S3
STMicroelectronics · RFID ICs · SO-8
ST25DV16KC-IE6S3 from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V_EH | power_out | Energy harvesting analog output pin used to power external components. |
| 2 | AC0 | passive | Antenna coil terminal AC0 of the ISO/IEC 15693 contactless interface. |
| 3 | AC1 | passive | Antenna coil terminal AC1 of the ISO/IEC 15693 contactless interface. |
| 4 | VSS | power_in | Ground reference of the device. |
| 5 | SDA | bidirectional | Serial data I/O of the two-wire I²C interface. |
| 6 | SCL | input | Serial clock input of the two-wire I²C interface, which supports a 1 MHz protocol. |
| 7 | GPO | output | Open-drain interrupt output; the high level is recovered through an external pull-up. |
| 8 | VCC | power_in | Supply voltage, single supply from 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | RF And Wireless |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ST25DV16KC-IE6S3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
st25dv16kc-ie6s3-etched.step/st25dv16kc-ie6s3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st25dv16kc-ie6s3.step/st25dv16kc-ie6s3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (203 pp, sha256
aaa637577efb1a5d, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).