main
Ray Publish 0.1.0 0928f98
{
  "slug": "st232btr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics RS232 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "st232btr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "st232btr.kicad_sym",
    "st232btr.kicad_mod",
    "st232btr.glb",
    "st232btr.step",
    "st232btr.lbr",
    "docs/hero.png",
    "docs/st232btr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "st232btr-hero.glb",
    "st232btr-hero.overlay.json",
    "st232btr-etched.glb"
  ],
  "component": {
    "mpn": "ST232BTR",
    "manufacturer": "STMicroelectronics",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.st.com/resource/en/datasheet/st232btr.pdf",
    "parts": {
      "symbol": "st232btr.kicad_sym",
      "footprint": "st232btr.kicad_mod",
      "model_3d": "st232btr-hero.glb",
      "model_3d_plain": "st232btr-etched.glb",
      "model_3d_step": "st232btr-etched.step",
      "model_3d_step_plain": "st232btr.step",
      "lbr": "st232btr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5269059",
      "digikey": "497-2057-2-ND",
      "mouser": "511-ST232B"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T18:46:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-2057-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-ST232B",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal for the first charge pump capacitor."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Doubled voltage terminal; no external supply can be applied to V+."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal for the first charge pump capacitor."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal for the second charge pump capacitor."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative terminal for the second charge pump capacitor."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Inverted voltage terminal; no external supply can be applied to V-."
      },
      {
        "number": "7",
        "name": "T2OUT",
        "type": "output",
        "description": "Second transmitter output (RS-232 level), short circuit duration to ground is infinite, output swing typ ±7.8 V with 3 kΩ load."
      },
      {
        "number": "8",
        "name": "R2IN",
        "type": "input",
        "description": "Second receiver input (RS-232 level) with input voltage range of ±30 V and 3 to 7 kΩ input resistance."
      },
      {
        "number": "9",
        "name": "R2OUT",
        "type": "output",
        "description": "Second receiver output with TTL/CMOS levels, swinging between -0.3 V and VCC + 0.3 V at most."
      },
      {
        "number": "10",
        "name": "T2IN",
        "type": "input",
        "description": "Second transmitter input with logic thresholds of 0.8 V low and 2 V high."
      },
      {
        "number": "11",
        "name": "T1IN",
        "type": "input",
        "description": "First transmitter input with logic thresholds of 0.8 V low and 2 V high."
      },
      {
        "number": "12",
        "name": "R1OUT",
        "type": "output",
        "description": "First receiver output with TTL/CMOS levels, swinging between -0.3 V and VCC + 0.3 V at most."
      },
      {
        "number": "13",
        "name": "R1IN",
        "type": "input",
        "description": "First receiver input (RS-232 level) with input voltage range of ±30 V and 3 to 7 kΩ input resistance."
      },
      {
        "number": "14",
        "name": "T1OUT",
        "type": "output",
        "description": "First transmitter output (RS-232 level), short circuit duration to ground is infinite, output swing typ ±7.8 V with 3 kΩ load."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, 4.5 to 5.5 V operating, absolute maximum -0.3 to 6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for charge-pump pins (C1+, C1-, C2+, C2-, V+, V-) are inferred from the function descripti"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0847,
        "at": "2026-10-26T18:46:29"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/st232btr.pdf",
        "pages": 19,
        "sha256": "2affe3b6692a2dbb",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "st232btr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "st232btr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e21cf91e9567a8bd3105bae3b6df275057506a4b9f3f49bc6b8e0515ec8fa4ea",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}