main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs st1s12gr: one-pass backfill (re-etched) · Ray
viewers st1s12gr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md st1s12gr: specified limits as data (metadata.characteristics, 34 rows from the datasheet) · Ray
st1s12gr-etched.fit.json st1s12gr: one-pass backfill (re-etched) · Ray
st1s12gr-etched.glb st1s12gr: one-pass backfill (re-etched) · Ray
st1s12gr-etched.step st1s12gr: one-pass backfill (re-etched) · Ray
st1s12gr-hero.glb st1s12gr: one-pass backfill (re-etched) · Ray
st1s12gr-hero.overlay.json st1s12gr: one-pass backfill (re-etched) · Ray
st1s12gr.glb Publish 0.1.0 · Ray
st1s12gr.kicad_mod Publish 0.1.0 · Ray
st1s12gr.kicad_sym Publish 0.1.0 · Ray
st1s12gr.lbr Publish 0.1.0 · Ray
st1s12gr.step Publish 0.1.0 · Ray

ST1S12GR

STMicroelectronics · DC-DC Converters · TSOT-23-5

ST1S12GR from STMicroelectronics, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin with voltage range -0.3 V to VIN + 0.3 V; device ON above 1.5 V threshold, device OFF below 0.5 V threshold, input current 1 µA maximum.
2 GND power_in System ground (0 V reference).
3 SW output Switching output pin with voltage range -0.3 V to VIN + 0.3 V, connected to external inductor in step-down topology.
4 VIN power_in Input supply pin with operating voltage range 2.5 V to 5.5 V, supporting maximum output current of 0.7 A.
5 FB/VO input Feedback voltage pin with voltage range -0.3 V to 3 V and typical feedback voltage of 600 mV, connected to external resistor divider network to set output voltage.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback voltage FB 582 600 618 mV TJ = -40 to 125°C 6
VFB pin bias current IFB -50 50 nA 6
Minimum input voltage VIN 2.5 V IO = 10mA to 0.7A 6
Quiescent current IQ 500 650 µA VIN = VEN, VFB = 0.65V 6
Quiescent current (shutdown) IQ 1 µA VEN = 0, TJ = -40°C to 85°C 6
Output current IO 0.7 A VIN = 2.5V to 5.5 V (1) 6
Enable threshold, device ON VEN 1.5 V Device ON, VIN = 2.5V to 5.5V 6
Enable threshold, device OFF VEN 0.5 V Device OFF 6
Enable pin current IEN 1 µA 6
Reference line regulation %VO/ΔVIN 0.05 0.1 %VO/ΔVIN VIN = 2.5V to 5.5V (1) 6
Reference load regulation %VO/ΔIO 0.0025 0.005 %VO/mA IO = 10 mA to 700mA (1) 6
PWM switching frequency PWMfS 1.16 1.7 2.08 MHz 6
Maximum duty cycle DMAX 100 % 6
NMOS switch on resistance RDSON-N 0.25 0.4 Ω ISW = 100mA 6
PMOS switch on resistance RDSON-P 0.25 0.45 Ω ISW = 100mA 6
Efficiency ν 80 % IO = 10mA to 100 mA, VO = 1.8V 6
Efficiency ν 90 % IO = 100mA to 0.7A, VO = 1.8V 6
Thermal shutdown TSHDN 130 150 °C 6
Load transient response %VO/ΔIO -5 5 %VO IO = 100mA to 700mA, TA = 25°C, tR = tF ≥ 200ns, CO=22µF (1) 6
Short circuit removal response %VO/ΔIO -10 10 %VO IO = 10mA to IO= short, TA = 25°C (1) 6
Positive power supply voltage VIN -0.3 6.5 V 5
Enable voltage VEN -0.3 V 5
SWITCH voltage (max voltage of output pin) SWITCH -0.3 V 5
Feedback voltage VFB/VO -0.3 3 V 5
Output voltage VO -0.3 6 V for VO > 1.6 V 5
Max junction temperature TJ -40 150 °C 5
Storage temperature range TSTG -65 150 °C 5
Lead temperature (soldering) TLEAD 260 °C 10 sec 5
Input supply voltage operating range VIN 2.5 5.5 V Input voltage range stated in description 1
Operative junction temperature TJ -40 125 °C 1
Supply current (switching current limitation) ISWL 1.6 A 6
Thermal shutdown hysteresis THYS 15 °C 6
Thermal resistance junction-ambient RthJA 220 °C/W 5
Thermal resistance junction-case RthJC 110 °C/W 5

CAD (KiCad official)

  • Symbol: ST1S12GR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: st1s12gr-etched.step / st1s12gr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); st1s12gr.step / st1s12gr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (20 pp, sha256 6e911e5bce170a9f, retrieved 2026-10-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF