component
SST26VF040AT-104I
Public Made by Adomby adom
MICROCHIP TECHNOLOGY / ATMEL Global Sourcing Parts, SOIC-8-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240
{
"slug": "sst26vf040at-104i",
"version": "0.1.0",
"type": "component",
"description": "MICROCHIP TECHNOLOGY / ATMEL Global Sourcing Parts, SOIC-8-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"global sourcing parts",
"sst26vf040at-104i",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sst26vf040at-104i.kicad_sym",
"sst26vf040at-104i.kicad_mod",
"sst26vf040at-104i.glb",
"sst26vf040at-104i.step",
"sst26vf040at-104i.lbr",
"docs/hero.png",
"docs/sst26vf040at-104i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sst26vf040at-104i-hero.glb",
"sst26vf040at-104i-hero.overlay.json",
"sst26vf040at-104i-etched.glb"
],
"component": {
"mpn": "SST26VF040AT-104I",
"manufacturer": "MICROCHIP TECHNOLOGY / ATMEL",
"package": "SOIC-8-150mil",
"pin_count": 8,
"category": "Global Sourcing Parts",
"subcategory": "Global Sourcing Parts",
"datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/MPD/ProductDocuments/DataSheets/SST26VF040A-2.5V-3.0V-4-Mbit-Serial-Quad-IO-%28SQI%29-Flash-Memory-20006292B.pdf",
"parts": {
"symbol": "sst26vf040at-104i.kicad_sym",
"footprint": "sst26vf040at-104i.kicad_mod",
"model_3d": "sst26vf040at-104i-hero.glb",
"model_3d_plain": "sst26vf040at-104i-etched.glb",
"model_3d_step": "sst26vf040at-104i-etched.step",
"model_3d_step_plain": "sst26vf040at-104i.step",
"lbr": "sst26vf040at-104i.lbr"
},
"distributor_links": {
"lcsc": "C5229123"
},
"distributor_check": {
"checked_at": "2026-10-31T02:06:06Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "CE#",
"type": "input",
"description": "Chip Enable: device is enabled by a high-to-low transition and CE# must remain low for the duration of any command sequence."
},
{
"number": "2",
"name": "SO/SIO1",
"type": "bidirectional",
"description": "Serial data output in SPI mode (SO) or serial data I/O 1 in SQI mode; data is shifted out on the falling edge of the serial clock and SO is the default after Power-on Reset or hardware Reset."
},
{
"number": "3",
"name": "WP#/SIO2",
"type": "bidirectional",
"description": "Write-Protect (works only in SPI single-bit and dual-bit Read mode, used with WPEN and IOC bits to prohibit writes to the Block Protection register) or serial data I/O 2 in quad mode."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground."
},
{
"number": "5",
"name": "SI/SIO0",
"type": "bidirectional",
"description": "Serial data input in SPI mode (SI) or serial data I/O 0 in SQI mode; inputs are latched on the rising edge of the serial clock and SI is the default after Power-on Reset or hardware Reset."
},
{
"number": "6",
"name": "SCK",
"type": "input",
"description": "Serial Clock: commands, addresses, or input data are latched on the rising edge and output data is shifted out on the falling edge."
},
{
"number": "7",
"name": "RESET#/HOLD#/SIO3",
"type": "bidirectional",
"description": "HOLD# temporarily stops serial communication (works only in SPI single-bit and dual-bit Read mode, must be tied high when not in use), RESET# resets the device when enabled via Configuration register bit 6, or serial data I/O 3 in quad mode."
},
{
"number": "8",
"name": "VDD",
"type": "power_in",
"description": "Power supply voltage, 2.7V-3.6V or 2.3V-3.6V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin numbers were read from the Figure 2-1 top-view drawing, where the extracted text lists the label; The datasheet text gives no pin types. Types were inferred from the pin functions. The multiplexed S"
],
"pages_sent": 16,
"cost_usd": 0.12,
"at": "2026-10-31T02:05:58"
},
"datasheet": {
"url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MPD/ProductDocuments/DataSheets/SST26VF040A-2.5V-3.0V-4-Mbit-Serial-Quad-IO-%28SQI%29-Flash-Memory-20006292B.pdf",
"pages": 73,
"sha256": "20b7245e058de3f5",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sst26vf040at-104i.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sst26vf040at-104i-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "dbed29d0b600223fa3033bc55a70270b19f3c240d17bbff1d128423fd16ef5ed",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SN",
"source_page": 50,
"D": {
"nom_mm": 4.9,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 3.9,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 6.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.75,
"range_mm": [
null,
1.75
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "sst26vf040at-104i.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}