SST26VF032BT-104I

{
  "slug": "sst26vf032bt-104i",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech NOR FLASH, SOIC-8-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "sst26vf032bt-104i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sst26vf032bt-104i.kicad_sym",
    "sst26vf032bt-104i.kicad_mod",
    "sst26vf032bt-104i.glb",
    "sst26vf032bt-104i.step",
    "sst26vf032bt-104i.lbr",
    "docs/hero.png",
    "docs/sst26vf032bt-104i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sst26vf032bt-104i-hero.glb",
    "sst26vf032bt-104i-hero.overlay.json",
    "sst26vf032bt-104i-etched.glb"
  ],
  "component": {
    "mpn": "SST26VF032BT-104I",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8-208mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886661619470336",
    "parts": {
      "symbol": "sst26vf032bt-104i.kicad_sym",
      "footprint": "sst26vf032bt-104i.kicad_mod",
      "model_3d": "sst26vf032bt-104i-hero.glb",
      "model_3d_plain": "sst26vf032bt-104i-etched.glb",
      "model_3d_step": "sst26vf032bt-104i-etched.step",
      "model_3d_step_plain": "sst26vf032bt-104i.step",
      "lbr": "sst26vf032bt-104i.lbr"
    },
    "distributor_links": {
      "lcsc": "C69337"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T22:03:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CE#",
        "type": "input",
        "description": "The device is enabled by a high to low transition on CE#, and CE# must remain low for the duration of any command sequence or the command/data input sequence of a write operation."
      },
      {
        "number": "2",
        "name": "SO/SIO1",
        "type": "bidirectional",
        "description": "In SPI mode (default after power-on) SO transfers data out of the device on the falling edge of SCK, and it becomes SIO1 for Quad I/O mode when the EQIO command is executed."
      },
      {
        "number": "3",
        "name": "WP#/SIO2",
        "type": "bidirectional",
        "description": "WP# is used with the WPEN and IOC bits to prohibit writes to the Block-Protection register, works only in SPI single-bit and dual-bit read mode, and becomes SIO2 in Quad I/O mode."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SI/SIO0",
        "type": "bidirectional",
        "description": "In SPI mode (default after power-on) SI latches commands, addresses, or data on the rising edge of SCK, and it becomes SIO0 for Quad I/O mode when the EQIO command is executed."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock that latches commands, addresses, or input data on its rising edge and shifts output data out on its falling edge."
      },
      {
        "number": "7",
        "name": "HOLD#/SIO3",
        "type": "bidirectional",
        "description": "HOLD# temporarily stops serial communication while the device is selected, must be tied high when not in use, works only in SPI single-bit and dual-bit read mode, and becomes SIO3 in Quad I/O mode."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply pin; the datasheet specifies a single 2.3-3.6V supply for write operations and 2.7-3.6V or 2.3-3.6V for read operations."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not map ordering codes or the -104I suffix to a package. The SOIC-8-208mil hint w; Pin numbers come from Figure 2-1 (page 4). The text extraction lost the drawing geometry, so numberi; The datasheet covers SST26VF032B and SST26VF032BA. The MPN given is SST26VF032B-104I, whose default "
        ],
        "pages_sent": 17,
        "cost_usd": 0.0748,
        "at": "2026-10-17T22:01:09"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886661619470336",
        "pages": 77,
        "sha256": "d42f884a5764dfad",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sst26vf032bt-104i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sst26vf032bt-104i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "760543fae4df1cd0a75f935d2a1bc8434160d404f35224f2c2711357897453bc",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}