component
SST25VF020B-80-4I-SAE
Public Made by Adomby adom
Microchip Tech NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSST25VF020B-80-4I-SAE
Microchip Tech · NOR FLASH · SOIC-8
SST25VF020B-80-4I-SAE from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: the device is enabled by a high-to-low transition on CE#, and CE# must remain low for the duration of any command sequence. |
| 2 | SO | output | Serial Data Output: data is shifted out on the falling edge of the serial clock, and SO outputs Flash busy status during AAI programming when reconfigured as RY/BY#. |
| 3 | WP# | input | Write-Protect: used to enable/disable the BPL bit in the STATUS register. |
| 4 | VSS | power_in | Ground. |
| 5 | SI | input | Serial Data Input: commands, addresses or data are latched on the rising edge of the serial clock. |
| 6 | SCK | input | Serial Clock: provides the timing of the serial interface. |
| 7 | HOLD# | input | Hold: temporarily stops serial communication with the SPI Flash memory without resetting the device. |
| 8 | VDD | power_in | Power Supply: provides power supply voltage of 2.7V-3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SST25VF020B-80-4I-SAE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sst25vf020b-80-4i-sae-etched.step/sst25vf020b-80-4i-sae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sst25vf020b-80-4i-sae.step/sst25vf020b-80-4i-sae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (33 pp, sha256
1e2e99da0c49d31c, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).