3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSSP7615-12M5R
Shanghai Siproin Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5
SSP7615-12M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; the input voltage range is 1.5V to 8V, with absolute maximum VIN of -0.3 to 8 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin, active high and not to be left floating; EN logic high is at least 1.2 V and EN logic low is at most 0.4 V. |
| 4 | NC | unconnected | Not connected. |
| 5 | VOUT | power_out | Output voltage pin; the output range is 1.2V to 5.0V, and the output current limit is typically 400 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.5 | 8 | V | 5 | ||
| Output Range | VOUT | -2 | 2 | % | IOUT=1mA | 5 | |
| Line Regulation | △VLINE | 0.15 | %/V | VIN=2.7~5.5V, IOUT=1mA | 5 | ||
| Shut-down Current | ISHDN | 1 | µA | VEN=0V | 5 | ||
| EN logic high voltage | VENH | 1.2 | V | VIN=5.5V, IOUT=1mA; max printed as VIN | 5 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.5V, VOUT=0V | 5 | ||
| EN Input Current | IEN | 1 | μA | VEN= 0 to 5.5V | 5 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 8 | V | 4 | ||
| Max Output Current | IOUT | 450 | mA | 4 | |||
| Operating Temperature | Topr | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 150 | ℃ | 4 | ||
| Package Lead Soldering Temperature | Tsol | 260 | ℃ | 4 | |||
| Junction Temperature | Tj | -40 | 125 | ℃ | 4 | ||
| Thermal Resistance (Junction to Ambient), SOT23-5 | θJA | 500 | ℃/W | Assume no ambient airflow, no heat sink | 4 | ||
| Power Dissipation, SOT23-5 | PD | 0.4 | W | Ta= 25℃ | 4 |
CAD (KiCad official)
- Symbol:
SSP7615-12M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ssp7615-12m5r-etched.step/ssp7615-12m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ssp7615-12m5r.step/ssp7615-12m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (13 pp, sha256
5ca4f994acdfaaba, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).