main
Ray
Publish 0.1.0
6bfe09e
SSP7603P25M5R
Shanghai Siproin Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5
SSP7603P25M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, with an absolute maximum of 18 V and an operating input range of 3.5 V to 15 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Chip-enable input, with a CE "High" voltage of at least 1.4 V and a CE "Low" voltage of at most 0.7 V. |
| 4 | NC | unconnected | Listed as NC (no connection) in the datasheet pin table, with no function given. |
| 5 | VOUT | power_out | Regulated output, 2.5 V nominal for the P25 variant with ±2% accuracy and up to 500 mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | -0.3 | 18 | V | 4 | ||
| Operating Temperature | -40 | 85 | ℃ | 4 | |||
| Storage Temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| Input Voltage | Vin | 3.5 | 15 | V | 4 | ||
| CE High Voltage | VCEH | 1.4 | V | 4 | |||
| CE Low Voltage | VCEL | 0.7 | V | 5 | |||
| Output voltage accuracy | Vout | -2 | 2 | % | tolerance ±2% (Features, page 1) | 1 | |
| Line Regulation | 0.05 | 0.2 | %/V | 1.6V≤Vin≤8V, Iout=100mA | 4 | ||
| Load Regulation | △Vout | 12 | 30 | mV | Vin=Vout+1V, 1.0mA≤Iout≤100mA | 5 | |
| Dropout Voltage | Vdrop | 0.25 | 0.27 | V | 2.0 < Vout ≤ 3.0, Iout=80 mA | 5 | |
| Supply Current | Iss1 | 1 | 2 | μA | 5 | ||
| Output Voltage Temperature Coefficient | -100 | 100 | ppm/℃ | Iout=30mA, 0℃≤Ta≤70℃ | 5 |
CAD (KiCad official)
- Symbol:
SSP7603P25M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ssp7603p25m5r-etched.step/ssp7603p25m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ssp7603p25m5r.step/ssp7603p25m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (12 pp, sha256
6a5e23397ccb8c42, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SSP7603P25M5R
**Shanghai Siproin Microelectronics** · Linear Voltage Regulators (LDO) · SOT-23-5
SSP7603P25M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, with an absolute maximum of 18 V and an operating input range of 3.5 V to 15 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | CE | input | Chip-enable input, with a CE "High" voltage of at least 1.4 V and a CE "Low" voltage of at most 0.7 V. |
| 4 | NC | unconnected | Listed as NC (no connection) in the datasheet pin table, with no function given. |
| 5 | VOUT | power_out | Regulated output, 2.5 V nominal for the P25 variant with ±2% accuracy and up to 500 mA output current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | -0.3 | | 18 | V | | 4 |
| Operating Temperature | | -40 | | 85 | ℃ | | 4 |
| Storage Temperature | TSTG | -40 | | 125 | ℃ | | 4 |
| Input Voltage | Vin | 3.5 | | 15 | V | | 4 |
| CE High Voltage | VCEH | 1.4 | | | V | | 4 |
| CE Low Voltage | VCEL | | | 0.7 | V | | 5 |
| Output voltage accuracy | Vout | -2 | | 2 | % | tolerance ±2% (Features, page 1) | 1 |
| Line Regulation | | | 0.05 | 0.2 | %/V | 1.6V≤Vin≤8V, Iout=100mA | 4 |
| Load Regulation | △Vout | | 12 | 30 | mV | Vin=Vout+1V, 1.0mA≤Iout≤100mA | 5 |
| Dropout Voltage | Vdrop | | 0.25 | 0.27 | V | 2.0 < Vout ≤ 3.0, Iout=80 mA | 5 |
| Supply Current | Iss1 | | 1 | 2 | μA | | 5 |
| Output Voltage Temperature Coefficient | | -100 | | 100 | ppm/℃ | Iout=30mA, 0℃≤Ta≤70℃ | 5 |
## CAD (KiCad official)
- Symbol: `SSP7603P25M5R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ssp7603p25m5r-etched.step` / `ssp7603p25m5r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ssp7603p25m5r.step` / `ssp7603p25m5r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Siproin Microelectronics datasheet](docs/ssp7603p25m5r-datasheet.pdf) (12 pp, sha256 `6a5e23397ccb8c42`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ssp7603p25m5r-datasheet.pdf)