Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SSP1840

Shanghai Siproin Microelectronics · Energy Metering · TSSOP-14

SSP1840 from Shanghai Siproin Microelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in 3.3V power supply
2 VT input External temperature sensor (NTC) signal input
3 IP1 input Current channel positive analog input with ±50mV maximum differential range (35mV RMS)
4 IN1 input Current channel negative analog input with ±50mV maximum differential range (35mV RMS)
5 VP input Voltage channel positive analog input with ±100mV maximum differential range (70mV RMS)
6 VN input Voltage channel negative analog input with ±100mV maximum differential range (70mV RMS)
7 GND power_in Ground
8 ZX output Voltage channel zero-crossing detection output
9 CF output Energy pulse output with multiplex function for alarm output (see MODE register for selection)
10 SEL input Interface select pin (0: UART, 1: SPI) with internal pull-down resistor
11 SCLK input SPI clock input (not required if using UART interface)
12 RX/SDI input UART receive line or SPI slave data input
13 TX/SDO output UART transmit line or SPI slave data output; requires external pull-up resistor
14 VPP unconnected Reserved, not connected

Key specifications

Parameter Value
Manufacturer Shanghai Siproin Microelectronics
Package TSSOP-14
Category Data Acquisition
Pins 14

CAD (KiCad official)

  • Symbol: SSP1840
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ssp1840-etched.step / ssp1840-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ssp1840.step / ssp1840.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Siproin Microelectronics datasheet (23 pp, sha256 6d2b6e4fd850a84c, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF