← Commit history

Initial commit: component/ssp1839

Ray ·a972175e17 ·
2 files changed +241
README.mdadded+52
@@ -0,0 +1,52 @@+# SSP1839++**Shanghai Siproin Microelectronics** · Energy Metering · SOP-16++SSP1839 from Shanghai Siproin Microelectronics, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Power supply input, nominal 3.3V operation. |+| 2 | VT | input | External NTC temperature sensor analog signal input. |+| 3 | IP1 | input | Current channel A positive differential analog input, maximum ±50mV peak (35mV RMS). |+| 4 | IN1 | input | Current channel A negative differential analog input reference, maximum ±50mV peak (35mV RMS). |+| 5 | IP2 | input | Current channel B positive differential analog input, maximum ±50mV peak (35mV RMS). |+| 6 | IN2 | input | Current channel B negative differential analog input reference, maximum ±50mV peak (35mV RMS). |+| 7 | VP | input | Voltage channel differential analog input, maximum ±100mV peak (70mV RMS). |+| 8 | GND | power_in | Ground reference at 0V. |+| 9 | ZX | output | Voltage channel zero-crossing detection logic output. |+| 10 | I_leak | output | Channel B leakage/over-current alarm logic output. |+| 11 | CF | output | Energy pulse output or multiplex alarm function configurable via MODE register. |+| 12 | SEL | input | Interface selection input (0 = UART mode, 1 = SPI mode), internal pull-down to UART default. |+| 13 | SCLK | input | SPI serial clock input, maximum frequency 900 kHz, unused in UART mode. |+| 14 | RX/SDI | input | UART receive input (RX) at 4800 bps or SPI serial data input (SDI) in SPI mode. |+| 15 | TX/SDO | output | UART transmit output (TX) at 4800 bps or SPI serial data output (SDO), requires external pull-up resistor. |+| 16 | VPP | unconnected | Reserved pin, no connection required. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Shanghai Siproin Microelectronics |+| Package | SOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SSP1839`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)+- 3D model files: `ssp1839-etched.step` / `ssp1839-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ssp1839.step` / `ssp1839.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Shanghai Siproin Microelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906739646914560) (27 pp, sha256 `8a58546aef68b8d7`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ssp1839-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "ssp1839",+  "version": "0.1.0",+  "type": "component",+  "description": "Shanghai Siproin Microelectronics Energy Metering, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ssp1839",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ssp1839.kicad_sym",+    "ssp1839.kicad_mod",+    "ssp1839.glb",+    "ssp1839.step",+    "ssp1839.lbr",+    "docs/hero.png",+    "docs/ssp1839-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SSP1839",+    "manufacturer": "Shanghai Siproin Microelectronics",+    "package": "SOP-16",+    "pin_count": 16,+    "category": "Data Acquisition",+    "subcategory": "Energy Metering",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906739646914560",+    "parts": {+      "symbol": "ssp1839.kicad_sym",+      "footprint": "ssp1839.kicad_mod",+      "model_3d": "ssp1839-etched.glb",+      "model_3d_plain": "ssp1839.glb",+      "model_3d_step": "ssp1839-etched.step",+      "model_3d_step_plain": "ssp1839.step",+      "lbr": "ssp1839.lbr"+    },+    "distributor_links": {+      "lcsc": "C410980"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input, nominal 3.3V operation."+      },+      {+        "number": "2",+        "name": "VT",+        "type": "input",+        "description": "External NTC temperature sensor analog signal input."+      },+      {+        "number": "3",+        "name": "IP1",+        "type": "input",+        "description": "Current channel A positive differential analog input, maximum ±50mV peak (35mV RMS)."+      },+      {+        "number": "4",+        "name": "IN1",+        "type": "input",+        "description": "Current channel A negative differential analog input reference, maximum ±50mV peak (35mV RMS)."+      },+      {+        "number": "5",+        "name": "IP2",+        "type": "input",+        "description": "Current channel B positive differential analog input, maximum ±50mV peak (35mV RMS)."+      },+      {+        "number": "6",+        "name": "IN2",+        "type": "input",+        "description": "Current channel B negative differential analog input reference, maximum ±50mV peak (35mV RMS)."+      },+      {+        "number": "7",+        "name": "VP",+        "type": "input",+        "description": "Voltage channel differential analog input, maximum ±100mV peak (70mV RMS)."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference at 0V."+      },+      {+        "number": "9",+        "name": "ZX",+        "type": "output",+        "description": "Voltage channel zero-crossing detection logic output."+      },+      {+        "number": "10",+        "name": "I_leak",+        "type": "output",+        "description": "Channel B leakage/over-current alarm logic output."+      },+      {+        "number": "11",+        "name": "CF",+        "type": "output",+        "description": "Energy pulse output or multiplex alarm function configurable via MODE register."+      },+      {+        "number": "12",+        "name": "SEL",+        "type": "input",+        "description": "Interface selection input (0 = UART mode, 1 = SPI mode), internal pull-down to UART default."+      },+      {+        "number": "13",+        "name": "SCLK",+        "type": "input",+        "description": "SPI serial clock input, maximum frequency 900 kHz, unused in UART mode."+      },+      {+        "number": "14",+        "name": "RX/SDI",+        "type": "input",+        "description": "UART receive input (RX) at 4800 bps or SPI serial data input (SDI) in SPI mode."+      },+      {+        "number": "15",+        "name": "TX/SDO",+        "type": "output",+        "description": "UART transmit output (TX) at 4800 bps or SPI serial data output (SDO), requires external pull-up resistor."+      },+      {+        "number": "16",+        "name": "VPP",+        "type": "unconnected",+        "description": "Reserved pin, no connection required."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 27,+        "cost_usd": 0.256,+        "at": "2026-09-18T01:11:31"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906739646914560",+        "pages": 27,+        "sha256": "8a58546aef68b8d7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file