component
SSP1117-5.0V
Public Made by Adomby adom
Shanghai Siproin Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.3.0
11 files changed
+360−277
README.md+11−37@@ -1,17 +1,18 @@ # SSP1117-5.0V +> Siproin's datasheet does not state the tab connection; this land follows the 1117-family convention (tab = Vout). Check before use.+ **Shanghai Siproin Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223 -SSP1117-5.0V from Shanghai Siproin Microelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+SSP1117-5.0V from Shanghai Siproin Microelectronics, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | Ground reference for the regulator. On fixed-voltage versions (including SSP1117-5.0V) pin 1 is the GND return; on the ADJ variant this same pin serves as the ADJ feedback node. |+| 1 | ADJ/GND | input | Ground reference for the regulator. On fixed-voltage versions (including SSP1117-5.0V) pin 1 is the GND return; on the ADJ variant this same pin serves as the ADJ feedback node. | | 2 | VOUT | power_out | Regulated 5.0V output (typ, ±2%). Delivers up to 1A load current. Requires a ~10uF tantalum output capacitor for stability. | | 3 | VIN | power_in | Unregulated input supply. Recommended max 20V (absolute max 30V). For 5.0V output, Vin must exceed Vout by the dropout voltage (~1.3V at 1A). Recommended 10uF tantalum bypass capacitor to GND. |-| 4 | TAB | power_in | SOT-223 heat-sink tab (Fin), internally connected to VOUT (pin 2). Solder to a large copper pour to reduce thermal resistance (~20°C/W with minimal copper). | ## Key specifications @@ -20,18 +21,7 @@ SSP1117-5.0V from Shanghai Siproin Microelectronics, in a SOT-223. Pinout and pi | Manufacturer | Shanghai Siproin Microelectronics | | Package | SOT-223 | | Category | PMIC |-| Pins | 4 |--## Ordering variants--Same part, different packaging or reel option.--- `SSP1117-5.0VL`-- `SSP1117-5.0V50L`-- `SSP1117-5.0V50LTR`-- `SSP1117-5.0VO`-- `SSP1117-5.0V50O`-- `SSP1117-5.0V50OTR`+| Pins | 3 | ## Electrical characteristics @@ -39,15 +29,13 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Output voltage, SSP1117-5.0V | Vout | 4.9 | 5 | 5.1 | V | 0≤Iout≤1A, Vin=7.0V | 4 |-| Line regulation, SSP1117-5.0V | △Vout | | 0.03 | 0.2 | %/V | Iout=10mA, 6.5V≤Vin≤12V | 4 |-| Load regulation, SSP1117-5.0V | △Vout | | 9 | 36 | mV | Vin=6.5V, 10mA≤Iout≤1A | 5 |+| Output voltage (SSP1117-5.0V) | Vout | 4.9 | 5 | 5.1 | V | 0≤Iout≤1A, Vin=7.0V | 4 |+| Line regulation (SSP1117-5.0V) | △Vout | | 0.03 | 0.2 | %/V | Iout=10mA, 6.5V≤Vin≤12V | 4 |+| Load regulation (SSP1117-5.0V) | △Vout | | 9 | 36 | mV | Vin=6.5V, 10mA≤Iout≤1A | 5 | | Dropout voltage | Vdrop | | 1.15 | 1.3 | V | Iout=100mA | 5 | | Dropout voltage | Vdrop | | 1.3 | 1.5 | V | Iout=1A | 5 |-| Quiescent current, SSP1117-5.0V | Iq | | 2 | 5 | mA | Vin=12V | 5 |+| Quiescent current (SSP1117-5.0V) | Iq | | 2 | 5 | mA | Vin=12V | 5 | | Temperature coefficient | ΔV/ΔT | -100 | | 100 | ppm | | 5 |-| Thermal resistance, junction to case, SOT-223 | θJC | | 20 | | ℃/W | SOT-223 package | 5 |-| Package thermal resistance, SOT-223 | | | 20 | | ℃/W | SOT-223 package | 3 | | Max input voltage | | | | 30 | V | | 3 | | Max operating junction temperature | Tj | | | 150 | ℃ | | 3 | | Ambient temperature | Ta | -40 | | 85 | ℃ | | 3 |@@ -55,7 +43,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Lead temperature | | | | 260 | ℃ | 10 s | 3 | | Recommended maximum input voltage | | | | 20 | V | | 3 | | Recommended operating junction temperature | Tj | -20 | | 125 | ℃ | | 3 |-| Environment temperature | | -20 | | 85 | ℃ | Stated in Features list | 1 |+| Package thermal resistance (SOT-223) | | | 20 | | ℃/W | SOT-223 package | 3 | ## CAD (KiCad official) @@ -64,25 +52,11 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries - 3D model: SOT-223 (KiCad packages3D, STEP) - 3D model files: `ssp1117-5-0v-etched.step` / `ssp1117-5-0v-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ssp1117-5-0v.step` / `ssp1117-5-0v.glb` are the bare package body. -## 3D model downloads--Two STEP files. Same geometry, different body top:--| File | Size | Use it when |-|---|---|---|-| [`ssp1117-5-0v.step`](ssp1117-5-0v.step) | 64 KB | You want the bare part, or you mark your own boards. |-| [`ssp1117-5-0v-etched.step`](ssp1117-5-0v-etched.step) | 1.8 MB | You want the part with `SSP1117-5.0V` already on it. |--The marking in the etched file is real recessed geometry cut into the solid, not a-texture or a decal: 454 faces against 75 in the bare model. It-survives export, section views, and rendering in any CAD tool, and it drops straight-into KiCad or Fusion with no extra setup.- ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Shanghai Siproin Microelectronics datasheet](docs/ssp1117-5-0v-datasheet.pdf) (9 pp, sha256 `4548d0eb79d83846`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [Shanghai Siproin Microelectronics datasheet](docs/ssp1117-5-0v-datasheet.pdf) (9 pp, sha256 `4548d0eb79d83846`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
docs/hero.png⋯ 1 unchanged line ⋯
package.json+123−6@@ -1,12 +1,14 @@ { "slug": "ssp1117-5-0v",- "version": "0.2.0",+ "version": "0.3.0", "type": "component",- "description": "Shanghai Siproin Microelectronics SSP1117 5 0V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "description": "Shanghai Siproin Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [ "component", "pmic",- "ssp1117-5.0v"+ "ssp1117-5.0v",+ "factory-2.0.0",+ "extractor-text" ], "dependencies": {}, "hero": {@@ -25,6 +27,121 @@ "docs/ssp1117-5-0v-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pads.json"- ]-}+ "ssp1117-5-0v-hero.glb",+ "ssp1117-5-0v-hero.overlay.json"+ ],+ "component": {+ "mpn": "SSP1117-5.0V",+ "build_note": "Siproin's datasheet does not state the tab connection; this land follows the 1117-family convention (tab = Vout). Check before use",+ "manufacturer": "Shanghai Siproin Microelectronics",+ "package": "SOT-223",+ "pin_count": 3,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e20117576fa0fe34b8b30ee1f0a6c01a.pdf",+ "parts": {+ "symbol": "ssp1117-5-0v.kicad_sym",+ "footprint": "ssp1117-5-0v.kicad_mod",+ "model_3d": "ssp1117-5-0v-hero.glb",+ "model_3d_plain": "ssp1117-5-0v.glb",+ "model_3d_step": "ssp1117-5-0v-etched.step",+ "model_3d_step_plain": "ssp1117-5-0v.step",+ "lbr": "ssp1117-5-0v.lbr"+ },+ "distributor_links": {+ "lcsc": "C277893"+ },+ "distributor_check": {+ "checked_at": "2026-11-13T17:17:12Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "ADJ/GND",+ "type": "input",+ "description": "Ground reference for the regulator. On fixed-voltage versions (including SSP1117-5.0V) pin 1 is the GND return; on the ADJ variant this same pin serves as the ADJ feedback node."+ },+ {+ "number": "2",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated 5.0V output (typ, ±2%). Delivers up to 1A load current. Requires a ~10uF tantalum output capacitor for stability."+ },+ {+ "number": "3",+ "name": "VIN",+ "type": "power_in",+ "description": "Unregulated input supply. Recommended max 20V (absolute max 30V). For 5.0V output, Vin must exceed Vout by the dropout voltage (~1.3V at 1A). Recommended 10uF tantalum bypass capacitor to GND."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/e20117576fa0fe34b8b30ee1f0a6c01a.pdf",+ "pages": 9,+ "sha256": "4548d0eb79d83846",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ssp1117-5-0v.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.0,+ 6.5,+ 1.7+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ssp1117-5-0v-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.0,+ 6.5,+ 1.7+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c10057e2e2a44da5b59ab9509abae64a4c1e60384ebde14fbceeac7107796216",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.json+42−43@@ -4,25 +4,28 @@ "slug": "ssp1117-5-0v", "title": "SSP1117-5.0V", "brief": "Shanghai Siproin Microelectronics SSP1117 5 0V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.0",+ "version": "0.3.0", "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic",- "ssp1117-5.0v"+ "ssp1117-5.0v",+ "factory-2.0.0",+ "extractor-text" ], "component": { "mpn": "SSP1117-5.0V",- "manufacturer": "Shanghai Siproin Microelectronics SSP1117 5 0V",+ "build_note": "Siproin's datasheet does not state the tab connection; this land follows the 1117-family convention (tab = Vout). Check before use",+ "manufacturer": "Shanghai Siproin Microelectronics", "package": "SOT-223",- "pin_count": 4,+ "pin_count": 3, "category": "PMIC", "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators", "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e20117576fa0fe34b8b30ee1f0a6c01a.pdf", "parts": { "symbol": "ssp1117-5-0v.kicad_sym", "footprint": "ssp1117-5-0v.kicad_mod",- "model_3d": "ssp1117-5-0v-etched.glb",+ "model_3d": "ssp1117-5-0v-hero.glb", "model_3d_plain": "ssp1117-5-0v.glb", "model_3d_step": "ssp1117-5-0v-etched.step", "model_3d_step_plain": "ssp1117-5-0v.step",@@ -31,11 +34,23 @@ "distributor_links": { "lcsc": "C277893" },+ "distributor_check": {+ "checked_at": "2026-11-13T17:17:12Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ }, "pins": [ { "number": "1",- "name": "GND",- "type": "power_in",+ "name": "ADJ/GND",+ "type": "input", "description": "Ground reference for the regulator. On fixed-voltage versions (including SSP1117-5.0V) pin 1 is the GND return; on the ADJ variant this same pin serves as the ADJ feedback node." }, {@@ -49,12 +64,6 @@ "name": "VIN", "type": "power_in", "description": "Unregulated input supply. Recommended max 20V (absolute max 30V). For 5.0V output, Vin must exceed Vout by the dropout voltage (~1.3V at 1A). Recommended 10uF tantalum bypass capacitor to GND."- },- {- "number": "4",- "name": "TAB",- "type": "power_in",- "description": "SOT-223 heat-sink tab (Fin), internally connected to VOUT (pin 2). Solder to a large copper pour to reduce thermal resistance (~20°C/W with minimal copper)." } ], "provenance": {@@ -63,12 +72,12 @@ "url": "https://datasheet.lcsc.com/datasheet/pdf/e20117576fa0fe34b8b30ee1f0a6c01a.pdf", "pages": 9, "sha256": "4548d0eb79d83846",- "source_tier": "lcsc"+ "source_tier": "mfr" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {- "total": 4,- "described": 4,+ "total": 3,+ "described": 3, "cites_pages": true, "refuses_to_fabricate": true }@@ -77,17 +86,6 @@ "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html" },- "pin1": {- "pad": "1",- "at": [- -3.15,- -2.3- ],- "corner": "top-left",- "source": "silk-marker",- "derived_from": "SOT-223-3_TabPin2@sha256:8ae5f03e2c16377a",- "mark": "drawn"- }, "models_3d": [ { "file": "ssp1117-5-0v.step",@@ -97,15 +95,15 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 7.0,+ 7, 6.5, 1.7 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",- "checked": "2026-10-07",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -116,15 +114,15 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 7.0,+ 7, 6.5, 1.7 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "bfbd19725f230fa75dceb3035501b131e5291bea8b38458b2d22bbc45d03f063",- "checked": "2026-10-16",+ "sha256": "c10057e2e2a44da5b59ab9509abae64a4c1e60384ebde14fbceeac7107796216",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]@@ -375,16 +373,15 @@ "ssp1117-5-0v.kicad_mod", "ssp1117-5-0v.glb", "ssp1117-5-0v.step",- "ssp1117-5-0v-etched.step", "ssp1117-5-0v.lbr", "docs/hero.png", "docs/ssp1117-5-0v-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "ssp1117-5-0v-hero.glb",+ "ssp1117-5-0v-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "SSP1117-5.0VL",@@ -411,5 +408,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-25T08:09:54.457Z"-}+ "updated_at": "2026-09-25T08:09:54.457Z",+ "description": "Shanghai Siproin Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+ "org": "adom"+}
ssp1117-5-0v-hero.glbadded⋯ 1 unchanged line ⋯
ssp1117-5-0v-hero.overlay.jsonadded+168@@ -0,0 +1,168 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "SSP1117-5.0V",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 4,+ "span_mm": 8.4,+ "dash_mm": 0.21,+ "gap_mm": 0.126,+ "pad_stroke_mm": 0.0504+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": false,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.664,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.5,+ 3.5,+ -2.684,+ 2.684+ ],+ "pads_bbox_mm": [+ -4.15,+ 4.15,+ -3.05,+ 3.05+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "ssp1117-5-0v-etched.glb",+ "glb_sha256": "626d2f15bee47eb1a51a420ce14c145691c645ce85d6b17b6beb43d553d50afd",+ "footprint": "ssp1117-5-0v.kicad_mod",+ "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+ "pins": "page.json component.pins",+ "pins_sha256": "da523e88a63da62721bb995a4f0d25f47bb7a10c614c01277fde98f6ce1ab8fb"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "ADJ/GND",+ "x": -4.3,+ "y": -2.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "VOUT",+ "x": -4.3,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "VIN",+ "x": -4.3,+ "y": 2.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ -2.3+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ 3.15,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 3.8+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ 2.3+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ }+ ]+}
ssp1117-5-0v.kicad_mod+6−40@@ -107,46 +107,6 @@ (layer "F.SilkS") (uuid "27420593-f422-495a-9e17-88a99bcd8a3d") )- (fp_line- (start -4.4 -3.6)- (end -4.4 3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")- )- (fp_line- (start -4.4 3.6)- (end 4.4 3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")- )- (fp_line- (start 4.4 -3.6)- (end -4.4 -3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "d963e7fb-b321-4298-bcd6-9650f5938938")- )- (fp_line- (start 4.4 3.6)- (end 4.4 -3.6)- (stroke- (width 0.05)- (type solid)- )- (layer "F.CrtYd")- (uuid "18839f08-10e9-4a73-9312-8be172f09091")- ) (fp_line (start -1.85 -2.35) (end -1.85 3.35)@@ -248,4 +208,10 @@ (xyz 0 0 0) ) )+ (fp_poly+ (pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ ) )
ssp1117-5-0v.kicad_sym+2−6@@ -8,8 +8,8 @@ (stroke (width 0.254) (type default)) (fill (type background))) ) (symbol "SSP1117-5.0V_1_1"- (pin power_in line (at -17.78 0.00 0) (length 5.08)- (name "GND" (effects (font (size 1.27 1.27))))+ (pin input line (at -17.78 0.00 0) (length 5.08)+ (name "ADJ/GND" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))) ) (pin power_out line (at -17.78 -2.54 0) (length 5.08)@@ -17,10 +17,6 @@ (number "2" (effects (font (size 1.27 1.27)))) ) (pin power_in line (at 17.78 0.00 180) (length 5.08)- (name "TAB" (effects (font (size 1.27 1.27))))- (number "4" (effects (font (size 1.27 1.27))))- )- (pin power_in line (at 17.78 -2.54 180) (length 5.08) (name "VIN" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) )
ssp1117-5-0v.lbr+6−15@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>Shanghai Siproin Microelectronics SSP1117 5 0V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223</description>+<description></description> <packages> <package name="SOT-223-3_TabPin2"> <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>@@ -79,40 +79,31 @@ </packages> <symbols> <symbol name="SSP1117-5.0V">- <description>Shanghai Siproin Microelectronics SSP1117 5 0V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223</description> <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/> <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/> <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text> <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>- <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="ADJ/GND" x="-17.78" y="0" length="middle" direction="in"/> <pin name="VOUT" x="-17.78" y="-2.54" length="middle" direction="out"/>- <pin name="TAB" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>- <pin name="VIN" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="VIN" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="SSP1117-5.0V" prefix="U">- <description>Shanghai Siproin Microelectronics SSP1117 5 0V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223</description>+ <description></description> <gates> <gate name="G$1" symbol="SSP1117-5.0V" x="0" y="0"/> </gates> <devices> <device name="" package="SOT-223-3_TabPin2"> <connects>- <connect gate="G$1" pin="GND" pad="1"/>+ <connect gate="G$1" pin="ADJ/GND" pad="1"/> <connect gate="G$1" pin="VOUT" pad="2 2@2"/>- <connect gate="G$1" pin="TAB" pad="2 2@2"/> <connect gate="G$1" pin="VIN" pad="3"/> </connects>- <technologies>- <technology name="">- <attribute name="MPN" value="SSP1117-5.0V" constant="no"/>- <attribute name="MANUFACTURER" value="Shanghai Siproin Microelectronics SSP1117 5 0V" constant="no"/>- <attribute name="LCSC_PN" value="C277893" constant="no"/>- </technology>- </technologies>+ <technologies><technology name=""/></technologies> </device> </devices> </deviceset>
viewers/footprint.html+1−65@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/SSP1117-5-0V footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.800 -4.000 9.600 8.000' style='width:100%;height:100%'><line class='ly-silk' x1='-1.850' y1='-3.410' x2='1.910' y2='-3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-1.850' y1='3.410' x2='1.910' y2='3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='-3.410' x2='1.910' y2='-2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='3.410' x2='1.910' y2='2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-4.400' y1='-3.600' x2='-4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.400' y1='3.600' x2='4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='-3.600' x2='-4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='3.600' x2='4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-0.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.850' y1='-3.350' x2='1.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.850' y1='-3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='GND' x='-4.150' y='-3.050' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='-2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='VOUT' x='-4.150' y='-0.750' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='0.000' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='2' data-name='VOUT' x='2.150' y='-1.900' width='2.000' height='3.800' rx='0.500' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.150' y='0.000' font-size='1.100' transform='rotate(-90 3.150 0.000)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='VIN' x='-4.150' y='1.550' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><polygon class='ly-silk adom-pin1' points='-3.130,-3.310 -3.370,-3.640 -2.890,-3.640 -3.130,-3.310' fill='#d8b4fe' stroke='none'><title>pin 1</title></polygon></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/SSP1117-5-0V", PINS=[{"desc":"","name":"GND","number":"1","type":""},{"desc":"","name":"VOUT","number":"2","type":""},{"desc":"","name":"TAB","number":"4","type":""},{"desc":"","name":"VIN","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+' '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){- var n=g.getAttribute('data-num');- g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});- g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});- g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){- function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}- apply(b.classList.contains('on'));- b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ssp1117-5-0v</title>
viewers/symbol.html+1−65@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/SSP1117-5-0V symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='GND'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='2' data-name='VOUT'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VOUT</text><g class='pingroup' data-num='4' data-name='TAB'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>TAB</text><g class='pingroup' data-num='3' data-name='VIN'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VIN</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/SSP1117-5-0V", PINS=[{"desc":"","name":"GND","number":"1","type":""},{"desc":"","name":"VOUT","number":"2","type":""},{"desc":"","name":"TAB","number":"4","type":""},{"desc":"","name":"VIN","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+' '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){- var n=g.getAttribute('data-num');- g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});- g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});- g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){- function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}- apply(b.classList.contains('on'));- b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ssp1117-5-0v</title>