component
SS6216-SO-TP
Public Made by Adomby adom
LEADPOWER Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SS6216-SO-TP
LEADPOWER · Brushed DC Motor Drivers · SOP-8
SS6216-SO-TP from LEADPOWER, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not defined in the datasheet; no internal function, so it is left unconnected. |
| 2 | INA | input | Forward-rotation logic input; logic high requires at least 2.0 V, logic low is at most 0.8 V, and the input voltage range is 0 V to VDD. |
| 3 | INB | input | Reverse-rotation logic input; logic high requires at least 2.0 V, logic low is at most 0.8 V, and the input voltage range is 0 V to VDD. |
| 4 | VDD | power_in | Supply pin with an operating range of 2.4 V to 7.2 V (absolute maximum -0.3 V to 7.2 V); the VDD capacitor must be placed as close to the chip as possible. |
| 5 | OUTB | output | Reverse-rotation motor output; continuous output current is limited to 1.4 A, peak 2 A, and it must not be tied directly to ground or supply. |
| 6 | AGND | power_in | Ground terminal (analog ground) for the device. |
| 7 | PGND | power_in | Ground terminal (power ground) for the device; peak current must be kept low enough to avoid damaging the IC on motor stall. |
| 8 | OUTA | output | Forward-rotation motor output; continuous output current is limited to 1.4 A, peak 2 A, and it must not be tied directly to ground or supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LEADPOWER |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (Supply voltage, absolute max) | VDD | -0.3 | 7.2 | V | 4 | ||
| 电源电压 (Supply voltage, recommended) | VDD | 2.4 | 7.2 | V | 4 | ||
| 输入电压 (Input voltage, absolute max) | INA,INB | -0.3 | V | 4 | |||
| 输入电压 (Input voltage, recommended) | INA,INB | 0 | V | 4 | |||
| 工作温度 (Operating temperature) | TJ | -30 | 85 | ℃ | 4 | ||
| 结温 (Junction temperature) | Tj | 150 | ℃ | 4 | |||
| 存储温度 (Storage temperature) | Tstg | -55 | 150 | ℃ | 4 | ||
| 输出峰值电流 (Peak output current) | Ipeak | 0 | 2 | A | 4 | ||
| 输出连续电流 (Continuous output current) | Icon | 0 | 1.4 | A | 4 | ||
| 正、反转输出电流 (Forward/reverse output current, recommended) | Iout | 1.4 | A | 4 | |||
| 热阻 (Thermal resistance junction to ambient) | θJA | 130 | ℃/W | 4 | |||
| 功耗 (Power dissipation) | Pd | 0.96 | W | 4 | |||
| 电路关断电流 (Standby current) | IDDST | 0 | 10 | uA | INA=INB=L | 5 | |
| 工作电流 (Operating current) | IDD | 0.1 | 0.5 | mA | INA=INB=H or INA=H, INB=L or INA=L, INB=H | 5 | |
| 高电平输入电压 (High-level input voltage) | VINH | 2 | V | 5 | |||
| 低电平输入电压 (Low-level input voltage) | VINL | 0.8 | V | 5 | |||
| 低电平输入电流 (Low-level input current) | IINL | 3.75 | 20 | uA | 5 | ||
| 输出导通阻抗 (Output on-resistance, PMOS+NMOS) | RON | 0.6 | 0.7 | Ω | Iout=0.8A（PMOS+NMOS） | 5 |
CAD (KiCad official)
- Symbol:
SS6216-SO-TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ss6216-so-tp-etched.step/ss6216-so-tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ss6216-so-tp.step/ss6216-so-tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LEADPOWER datasheet (6 pp, sha256
3fafb9c01a57a7ed, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SS6216-SO-TP
**LEADPOWER** · Brushed DC Motor Drivers · SOP-8
SS6216-SO-TP from LEADPOWER, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not defined in the datasheet; no internal function, so it is left unconnected. |
| 2 | INA | input | Forward-rotation logic input; logic high requires at least 2.0 V, logic low is at most 0.8 V, and the input voltage range is 0 V to VDD. |
| 3 | INB | input | Reverse-rotation logic input; logic high requires at least 2.0 V, logic low is at most 0.8 V, and the input voltage range is 0 V to VDD. |
| 4 | VDD | power_in | Supply pin with an operating range of 2.4 V to 7.2 V (absolute maximum -0.3 V to 7.2 V); the VDD capacitor must be placed as close to the chip as possible. |
| 5 | OUTB | output | Reverse-rotation motor output; continuous output current is limited to 1.4 A, peak 2 A, and it must not be tied directly to ground or supply. |
| 6 | AGND | power_in | Ground terminal (analog ground) for the device. |
| 7 | PGND | power_in | Ground terminal (power ground) for the device; peak current must be kept low enough to avoid damaging the IC on motor stall. |
| 8 | OUTA | output | Forward-rotation motor output; continuous output current is limited to 1.4 A, peak 2 A, and it must not be tied directly to ground or supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LEADPOWER |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (Supply voltage, absolute max) | VDD | -0.3 | | 7.2 | V | | 4 |
| 电源电压 (Supply voltage, recommended) | VDD | 2.4 | | 7.2 | V | | 4 |
| 输入电压 (Input voltage, absolute max) | INA,INB | -0.3 | | | V | | 4 |
| 输入电压 (Input voltage, recommended) | INA,INB | 0 | | | V | | 4 |
| 工作温度 (Operating temperature) | TJ | -30 | | 85 | ℃ | | 4 |
| 结温 (Junction temperature) | Tj | | | 150 | ℃ | | 4 |
| 存储温度 (Storage temperature) | Tstg | -55 | | 150 | ℃ | | 4 |
| 输出峰值电流 (Peak output current) | Ipeak | 0 | | 2 | A | | 4 |
| 输出连续电流 (Continuous output current) | Icon | 0 | | 1.4 | A | | 4 |
| 正、反转输出电流 (Forward/reverse output current, recommended) | Iout | | | 1.4 | A | | 4 |
| 热阻 (Thermal resistance junction to ambient) | θJA | | | 130 | ℃/W | | 4 |
| 功耗 (Power dissipation) | Pd | | | 0.96 | W | | 4 |
| 电路关断电流 (Standby current) | IDDST | | 0 | 10 | uA | INA=INB=L | 5 |
| 工作电流 (Operating current) | IDD | | 0.1 | 0.5 | mA | INA=INB=H or INA=H, INB=L or INA=L, INB=H | 5 |
| 高电平输入电压 (High-level input voltage) | VINH | 2 | | | V | | 5 |
| 低电平输入电压 (Low-level input voltage) | VINL | | | 0.8 | V | | 5 |
| 低电平输入电流 (Low-level input current) | IINL | | 3.75 | 20 | uA | | 5 |
| 输出导通阻抗 (Output on-resistance, PMOS+NMOS) | RON | | 0.6 | 0.7 | Ω | Iout=0.8A（PMOS+NMOS） | 5 |
## CAD (KiCad official)
- Symbol: `SS6216-SO-TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ss6216-so-tp-etched.step` / `ss6216-so-tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ss6216-so-tp.step` / `ss6216-so-tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LEADPOWER datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590234400064634880) (6 pp, sha256 `3fafb9c01a57a7ed`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ss6216-so-tp-datasheet.pdf)