# SS-101M1EBK-0805

**Lelon** · Aluminum Electrolytic Capacitors - Leaded · CP_Radial_D8.0mm_P3.50mm

SS-101M1EBK-0805 from Lelon, in a CP_Radial_D8.0mm_P3.50mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of a POLARISED capacitor (Capacitors / Aluminum Electrolytic Capacitors - Leaded). Which terminal is the anode (+) is not yet recorded on this page: read it from the maker's datasheet before placing. |
| 2 | 2 | passive | Terminal 2 of a POLARISED capacitor (Capacitors / Aluminum Electrolytic Capacitors - Leaded). Which terminal is the anode (+) is not yet recorded on this page: read it from the maker's datasheet before placing. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Lelon |
| Package | CP_Radial_D8.0mm_P3.50mm |
| Category | Capacitors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Capacitance tolerance |  | -20 |  | 20 | % | 120 Hz, 20℃ | 2 |
| Category temperature range |  | -40 |  | 85 | ℃ |  | 2 |
| Rated voltage | VR |  |  | 25 | V |  | 2 |
| Surge voltage | VS |  |  | 28.8 | VDC |  | 2 |
| Ripple current | IAC,R |  |  | 99 | mA | 120 Hz, 85℃ | 2 |
| Leakage current | ILEAK |  |  | 25 | µA | 20℃, after 2 minutes | 2 |
| Tan δ | tan δ |  |  | 0.15 |  | 120 Hz, 20℃ | 2 |
| Impedance ratio Z(-25℃)/Z(+20℃) | Z(-25℃)/Z(+20℃) |  |  | 2 |  | 120 Hz | 2 |
| Impedance ratio Z(-40℃)/Z(+20℃) | Z(-40℃)/Z(+20℃) |  |  | 4 |  | 120 Hz | 2 |
| Endurance capacitance change | ΔC | -25 |  | 25 | % | 1,000 h at 85℃; VR, IAC,R | 2 |
| Endurance tan δ | tan δ |  |  | 200 | % of specified value | 1,000 h at 85℃ | 2 |
| Shelf life capacitance change | ΔC | -25 |  | 25 | % | 500 h at 85℃ | 2 |
| Shelf life tan δ | tan δ |  |  | 200 | % of specified value | 500 h at 85℃ | 2 |
| High temperature unload life capacitance change | ΔC | -25 |  | 25 | % | 500 +24/-0 h at 85℃ without rated voltage (10~50 V) | 5 |
| High temperature unload life tan δ | tan δ |  |  | 200 | % of specified value | 500 +24/-0 h at 85℃ without rated voltage | 5 |
| Rotational temperature test capacitance change | ΔC | -10 |  | 10 | % | 10 cycles, -40℃ to +85℃ | 5 |
| Humidity test capacitance change | ΔC | -10 |  | 10 | % | 1000 +48/-0 h at 60℃, 90~95% R.H. | 5 |
| Humidity test tan δ | tan δ |  |  | 120 | % of specified value | 1000 +48/-0 h at 60℃, 90~95% R.H. | 5 |
| Low temperature test capacitance change | ΔC | -10 |  | 10 | % | -40℃ for 96 h | 5 |
| Vibration test capacitance change | ΔC | -10 |  | 10 | % | 10 to 55 Hz, 1.5 mm total amplitude | 5 |
| Solder heat-resistance capacitance change | ΔC | -10 |  | 10 | % | 260±5℃ liquid tin, 10±1 s | 5 |
| Surge voltage test capacitance change | ΔC | -20 |  | 20 | % | 1000 cycles at 15~35℃, 1 kΩ series resistor | 6 |
| Surge voltage test tan δ | tan δ |  |  | 175 | % of specified value | 1000 cycles at 15~35℃, 1 kΩ series resistor | 6 |
| Solderability solder coating |  | 95 |  |  | % | 245±5℃, 2±0.5 s immersion | 6 |
| Reverse voltage limit |  |  |  | 1 | V | reverse voltage within a specified temperature limit | 7 |
| Nominal capacitance | CR |  | 100 |  | µF | 120 Hz, 20℃ | 2 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | The section of lead below 4 mm from the body of capacitor must be immersed in 260 ± 5℃ liquid tin | 5 |

## CAD (KiCad official)

- Symbol: `SS-101M1EBK-0805`
- Footprint: `Capacitor_THT:CP_Radial_D8.0mm_P3.50mm`
- 3D model: CP_Radial_D8.0mm_P3.50mm (KiCad packages3D, STEP)
- 3D model files: `ss-101m1ebk-0805-etched.step` / `ss-101m1ebk-0805-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ss-101m1ebk-0805.step` / `ss-101m1ebk-0805.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Lelon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603362595239698432) (9 pp, sha256 `ba9595fc1f12ba39`, retrieved 2026-11-06, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ss-101m1ebk-0805-datasheet.pdf)