component

SRP5030CC-2R2M

Public Made by Adom

by adom

Bourns Fixed Inductors, SMD,5.7x5.2mm. KiCad symbol, footprint and 3D as used on Adom boards.

componentinductors, coils, chokessrp5030cc-2r2mboard-derived

Verified SRP5030CC-2R2M

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record, 1 retired · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Bourns' SRP5030CC Series datasheet (REV. 07/23)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: Bourns REV. 07/23 downloaded 2026-10-27 from bourns.com/docs/Product-Datasheets/SRP5030CC.pdf; same edition as the JLCPCB copy the page carried (the files differ only in Bourns' 2026 re-stamp), now replaced by the manufacturer's file
  • ✓SRP5030CC-2R2M row on p.1: 2.2 uH +/-20 % at 100 kHz / 1 V, DCR 26 mOhm typ / 32 mOhm max, Irms 7 A, Isat 8 A
  • ✓Pins: two-terminal inductor with no pin numbering in the datasheet (electrical schematic p.2); library convention numbers 1/2 with empty names (the board symbol's names "1"/"2" were removed); both passive
  • ✓Footprint vs the Recommended Layout (p.2): 6.5 mm overall, 2.5 mm gap, 2.8 mm pad height gives pads 2.0 x 2.8 mm at 4.5 mm centres; the footprint has pads 2.0 x 2.8 mm at +/-2.25 mm, an exact match. Bottom terminals 1.1 x 2.5 mm lie inside the pads
  • ✓3D body 5.72 x 5.20 x 2.80 mm against 5.7 +/-0.3, 5.2 +/-0.2 and 2.8 +/-0.2 (p.2); Z-up, seated on z = 0, centred on the pads
  • ✓DigiKey 118-SRP5030CC-2R2MTR-ND and Mouser 652-SRP5030CC-2R2M confirmed as Bourns SRP5030CC-2R2M (searched 2026-10-27)
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Bourns)
Verified files✓ srp5030cc-2r2m.kicad_sym✓ srp5030cc-2r2m.kicad_mod✓ srp5030cc-2r2m.step
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! srp5030cc-2r2m.kicad_sym! srp5030cc-2r2m.kicad_mod✓ srp5030cc-2r2m.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
srp5030cc-2r2m / srp5030cc-2r2m-hero.overlay.json
HistoryDownload
Caleb Publish 0.1.2 103496c 2d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125
{
  "spec": "adom-hero 1.4",
  "mpn": "SRP5030CC-2R2M",
  "kind": "component + footprint reference art",
  "board_use": false,
  "plane_z_mm": -0.02,
  "units": "metre",
  "upAxis": "Z",
  "layers": {
    "pad_outlines": {
      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",
      "rgba": [
        0.0,
        0.902,
        0.863,
        0.5
      ],
      "pads": 2,
      "span_mm": 6.5,
      "dash_mm": 0.1625,
      "gap_mm": 0.0975,
      "pad_stroke_mm": 0.039
    },
    "silkscreen": {
      "material": "Silkscreen reference lines - 30 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.3
      ],
      "footprint_items": 8,
      "pin1": null
    },
    "signal_names": {
      "material": "Signal names - 50 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.5
      ],
      "font": "DejaVu Sans Mono",
      "labels": 2,
      "sides": "top + mirrored underside (single-sided)",
      "fallback_to_pad_number": 2
    }
  },
  "align": {
    "ok": true,
    "centre_offset_mm": 0.0,
    "tolerance_mm": 0.52,
    "orientation_flipped": false,
    "contacts_bbox_mm": [
      -2.86,
      2.86,
      -2.6,
      2.6
    ],
    "pads_bbox_mm": [
      -3.25,
      3.25,
      -1.4,
      1.4
    ],
    "seating_z_mm": -0.0
  },
  "sources": {
    "glb": "srp5030cc-2r2m-etched.glb",
    "glb_sha256": "db9f68874bfceb854ec619146e71bf8ae2f13f24adf86df480c7782236f5b090",
    "footprint": "srp5030cc-2r2m.kicad_mod",
    "footprint_sha256": "41fa86eb80d3bce7d72966097cacf1eb95a8c9f34e1554f3781d3a89413b01cf",
    "pins": "page.json component.pins",
    "pins_sha256": "114a2f6d17dae0feb1e7f6e7de8a3698948eb467ef9026e6713db11016efb2a4"
  },
  "generator": "adom-wiki 1.8.0 (component_hero)",
  "labels": [
    {
      "pad": "1",
      "text": "1",
      "x": -3.4,
      "y": 0.0,
      "align": "right",
      "vertical": false,
      "h": 0.6
    },
    {
      "pad": "2",
      "text": "2",
      "x": 3.4,
      "y": 0.0,
      "align": "left",
      "vertical": false,
      "h": 0.6
    }
  ],
  "pads": [
    {
      "number": "1",
      "shape": "roundrect",
      "center_mm": [
        -2.25,
        0.0
      ],
      "size_mm": [
        2.0,
        2.8
      ],
      "rot": 0.0
    },
    {
      "number": "2",
      "shape": "roundrect",
      "center_mm": [
        2.25,
        0.0
      ],
      "size_mm": [
        2.0,
        2.8
      ],
      "rot": 0.0
    }
  ]
}