component
SRF1206P010
Public Made by Adomby adom
prosemi Resettable Fuses, 1206. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SRF1206P010
prosemi · Resettable Fuses · 1206
SRF1206P010 from prosemi, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One of two interchangeable, non-polarized terminals of the resettable PTC fuse, rated 0.10 A hold current, 0.25 A trip current, 60 V max and 40 A max fault current. |
| 2 | 2 | passive | Second interchangeable, non-polarized terminal of the resettable PTC fuse, rated 0.10 A hold current, 0.25 A trip current, 60 V max and 40 A max fault current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | prosemi |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current IH (25℃ still air) | IH | 0.1 | A | 25℃ still air; definition: maximum current at which device will not trip | 1 | ||
| Trip current IT | IT | 0.25 | A | 25℃ still air; definition: minimum current at which device will always trip | 1 | ||
| Maximum continuous voltage Vmax | Vmax | 60 | V | Maximum continuous voltage without damage at rated current | 1 | ||
| Maximum fault current Imax | Imax | 40 | A | Maximum fault current without damage at rated voltage | 1 | ||
| Minimum resistance Rmin | Rmin | 1.6 | Ω | Initial un-soldered state | 1 | ||
| Maximum resistance R1max | R1max | 15 | Ω | 25℃, measured one hour after reflow | 1 | ||
| Max time to trip (first printed value) | Ttrip | 0.5 | Sec. | Assigned current not identified in extracted text | 1 | ||
| Max time to trip (second printed value) | Ttrip | 1 | Sec. | Assigned current not identified in extracted text | 1 | ||
| Typical power dissipation Pdtyp | Pdtyp | 0.4 | W | Typical power dissipated in the tripped state; environment wording garbled in extracted text | 1 | ||
| Hold current vs ambient temperature | IH | 0.148 | A | Ambient -40℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.132 | A | Ambient -20℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.116 | A | Ambient 0℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.1 | A | Ambient 25℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.085 | A | Ambient 40℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.075 | A | Ambient 50℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.07 | A | Ambient 60℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.06 | A | Ambient 70℃ (derating chart) | 1 | ||
| Hold current vs ambient temperature | IH | 0.055 | A | Ambient 85℃ (derating chart) | 1 | ||
| Peak reflow temperature | Tp | 260 | ℃ | Lead-free reflow profile, peak temperature | 2 | ||
| Time at peak temperature ±5℃ | tp | 20 | 40 | seconds | Within ±5℃ of peak temperature | 2 | |
| Heating rate from Tsmax to Tp | 3 | ℃/second | Heating rate from Tsmax to peak | 2 | |||
| Cooling rate | 6 | ℃/second | Cooling from peak | 2 | |||
| Time from 25℃ to peak temperature | 8 | minutes | From 25℃ to peak temperature | 2 | |||
| Preheat temperature Tsmin | Tsmin | 150 | ℃ | Preheat | 2 | ||
| Preheat temperature Tsmax | Tsmax | 200 | ℃ | Preheat | 2 | ||
| Preheat time Tsmin to Tsmax | 60 | 180 | seconds | Preheat, Tsmin to Tsmax | 2 | ||
| Time above TL | tL | 60 | 150 | seconds | Above TL (printed as >217℃) | 2 | |
| Liquidus temperature TL | TL | 217 | ℃ | Printed as >217℃ | 2 |
CAD (KiCad official)
- Symbol:
SRF1206P010 - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
srf1206p010-etched.step/srf1206p010-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);srf1206p010.step/srf1206p010.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: prosemi datasheet (3 pp, sha256
8ceac4ddf74674d6, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SRF1206P010
**prosemi** · Resettable Fuses · 1206
SRF1206P010 from prosemi, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One of two interchangeable, non-polarized terminals of the resettable PTC fuse, rated 0.10 A hold current, 0.25 A trip current, 60 V max and 40 A max fault current. |
| 2 | 2 | passive | Second interchangeable, non-polarized terminal of the resettable PTC fuse, rated 0.10 A hold current, 0.25 A trip current, 60 V max and 40 A max fault current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | prosemi |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hold current IH (25℃ still air) | IH | | | 0.1 | A | 25℃ still air; definition: maximum current at which device will not trip | 1 |
| Trip current IT | IT | 0.25 | | | A | 25℃ still air; definition: minimum current at which device will always trip | 1 |
| Maximum continuous voltage Vmax | Vmax | | | 60 | V | Maximum continuous voltage without damage at rated current | 1 |
| Maximum fault current Imax | Imax | | | 40 | A | Maximum fault current without damage at rated voltage | 1 |
| Minimum resistance Rmin | Rmin | 1.6 | | | Ω | Initial un-soldered state | 1 |
| Maximum resistance R1max | R1max | | | 15 | Ω | 25℃, measured one hour after reflow | 1 |
| Max time to trip (first printed value) | Ttrip | | | 0.5 | Sec. | Assigned current not identified in extracted text | 1 |
| Max time to trip (second printed value) | Ttrip | | | 1 | Sec. | Assigned current not identified in extracted text | 1 |
| Typical power dissipation Pdtyp | Pdtyp | | 0.4 | | W | Typical power dissipated in the tripped state; environment wording garbled in extracted text | 1 |
| Hold current vs ambient temperature | IH | | 0.148 | | A | Ambient -40℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.132 | | A | Ambient -20℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.116 | | A | Ambient 0℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.1 | | A | Ambient 25℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.085 | | A | Ambient 40℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.075 | | A | Ambient 50℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.07 | | A | Ambient 60℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.06 | | A | Ambient 70℃ (derating chart) | 1 |
| Hold current vs ambient temperature | IH | | 0.055 | | A | Ambient 85℃ (derating chart) | 1 |
| Peak reflow temperature | Tp | | | 260 | ℃ | Lead-free reflow profile, peak temperature | 2 |
| Time at peak temperature ±5℃ | tp | 20 | | 40 | seconds | Within ±5℃ of peak temperature | 2 |
| Heating rate from Tsmax to Tp | | | | 3 | ℃/second | Heating rate from Tsmax to peak | 2 |
| Cooling rate | | | | 6 | ℃/second | Cooling from peak | 2 |
| Time from 25℃ to peak temperature | | | | 8 | minutes | From 25℃ to peak temperature | 2 |
| Preheat temperature Tsmin | Tsmin | 150 | | | ℃ | Preheat | 2 |
| Preheat temperature Tsmax | Tsmax | | | 200 | ℃ | Preheat | 2 |
| Preheat time Tsmin to Tsmax | | 60 | | 180 | seconds | Preheat, Tsmin to Tsmax | 2 |
| Time above TL | tL | 60 | | 150 | seconds | Above TL (printed as >217℃) | 2 |
| Liquidus temperature TL | TL | 217 | | | ℃ | Printed as >217℃ | 2 |
## CAD (KiCad official)
- Symbol: `SRF1206P010`
- Footprint: `Fuse:Fuse_1206_3216Metric`
- 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files: `srf1206p010-etched.step` / `srf1206p010-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `srf1206p010.step` / `srf1206p010.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [prosemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921239878197248) (3 pp, sha256 `8ceac4ddf74674d6`, retrieved 2026-10-15, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/srf1206p010-datasheet.pdf)