component
SRC4392IPFBR
Public Made by Adomby adom
Texas Instruments Audio Interface ICs, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
2b7f8a2
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481
{
"slug": "src4392ipfbr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Audio Interface ICs, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"src4392ipfbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"src4392ipfbr.kicad_sym",
"src4392ipfbr.kicad_mod",
"src4392ipfbr.glb",
"src4392ipfbr.step",
"src4392ipfbr.lbr",
"docs/hero.png",
"docs/src4392ipfbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"src4392ipfbr-hero.glb",
"src4392ipfbr-hero.overlay.json"
],
"component": {
"mpn": "SRC4392IPFBR",
"manufacturer": "Texas Instruments",
"package": "TQFP-48(7x7)",
"pin_count": 48,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "Audio Interface ICs",
"datasheet": "https://www.ti.com/cn/lit/gpn/src4392",
"parts": {
"symbol": "src4392ipfbr.kicad_sym",
"footprint": "src4392ipfbr.kicad_mod",
"model_3d": "src4392ipfbr-hero.glb",
"model_3d_plain": "src4392ipfbr.glb",
"model_3d_step": "src4392ipfbr-etched.step",
"model_3d_step_plain": "src4392ipfbr.step",
"lbr": "src4392ipfbr.lbr"
},
"distributor_links": {
"lcsc": "C2860057",
"digikey": "296-19740-2-ND",
"mouser": "595-SRC4392IPFBR"
},
"distributor_check": {
"checked_at": "2026-11-13T17:23:58Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-19740-2-ND",
"status": "found"
},
"mouser": {
"pn": "595-SRC4392IPFBR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RX1+",
"type": "input",
"description": "Noninverting input of line receiver 1; the RX1+/RX1- pair has a differential input sensitivity of 150 mV min and 200 mV typ."
},
{
"number": "2",
"name": "RX1-",
"type": "input",
"description": "Inverting input of line receiver 1; it forms a differential pair with RX1+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs."
},
{
"number": "3",
"name": "RX2+",
"type": "input",
"description": "Noninverting input of line receiver 2; the RX2+/RX2- pair has a differential input sensitivity of 150 mV min and 200 mV typ."
},
{
"number": "4",
"name": "RX2-",
"type": "input",
"description": "Inverting input of line receiver 2; it forms a differential pair with RX2+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs."
},
{
"number": "5",
"name": "RX3+",
"type": "input",
"description": "Noninverting input of line receiver 3; the RX3+/RX3- pair has a differential input sensitivity of 150 mV min and 200 mV typ."
},
{
"number": "6",
"name": "RX3-",
"type": "input",
"description": "Inverting input of line receiver 3; it forms a differential pair with RX3+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs."
},
{
"number": "7",
"name": "RX4+",
"type": "input",
"description": "Noninverting input of line receiver 4; the RX4+/RX4- pair has a differential input sensitivity of 150 mV min and 200 mV typ."
},
{
"number": "8",
"name": "RX4-",
"type": "input",
"description": "Inverting input of line receiver 4; it forms a differential pair with RX4+ with the 150 mV min / 200 mV typ sensitivity given for the line receiver inputs."
},
{
"number": "9",
"name": "VCC",
"type": "power_in",
"description": "DIR comparator and PLL power supply, +3.3V nominal (recommended range +3.0 V to +3.6 V)."
},
{
"number": "10",
"name": "AGND",
"type": "power_in",
"description": "DIR comparator and PLL power-supply ground; the substrate ground BGND (pin 44) should be connected to this pin by a PCB trace."
},
{
"number": "11",
"name": "LOCK",
"type": "output",
"description": "DIR PLL lock flag, active low."
},
{
"number": "12",
"name": "RXCKO",
"type": "tri_state",
"description": "DIR recovered master clock output, 3-state output."
},
{
"number": "13",
"name": "RXCKI",
"type": "input",
"description": "DIR reference clock input."
},
{
"number": "14",
"name": "MUTE",
"type": "input",
"description": "SRC output mute input, active high."
},
{
"number": "15",
"name": "RDY",
"type": "output",
"description": "SRC ready flag output, active low."
},
{
"number": "16",
"name": "DGND1",
"type": "power_in",
"description": "Digital core ground."
},
{
"number": "17",
"name": "VDD18",
"type": "power_in",
"description": "Digital core supply, +1.8V nominal (recommended range +1.65 V to +1.95 V)."
},
{
"number": "18",
"name": "CPM",
"type": "input",
"description": "Control port mode input: 0 selects SPI mode and 1 selects I2C mode; it must be tied to ground or pulled up to VIO respectively."
},
{
"number": "19",
"name": "CS/A0",
"type": "input",
"description": "Chip select, active low, for SPI mode; programmable slave address bit A0 for I2C mode."
},
{
"number": "20",
"name": "CCLK/SCL",
"type": "input",
"description": "Serial data clock for SPI mode (CCLK) or I2C bus clock (SCL); in I2C mode it requires an external pull-up to VIO."
},
{
"number": "21",
"name": "CDIN/A1",
"type": "input",
"description": "SPI serial data input for SPI mode; programmable slave address bit A1 for I2C mode."
},
{
"number": "22",
"name": "CDOUT/SDA",
"type": "bidirectional",
"description": "SPI serial data output, 3-state when CS is high (SPI mode); serial data I/O for I2C mode, requiring an external pull-up to VIO."
},
{
"number": "23",
"name": "INT",
"type": "output",
"description": "Interrupt flag output, open-drain and active low; requires a pull-up resistor to VIO (10 kΩ suggested)."
},
{
"number": "24",
"name": "RST",
"type": "input",
"description": "Reset input, active low, for device initialization."
},
{
"number": "25",
"name": "MCLK",
"type": "input",
"description": "Master clock input; frequency range 1 MHz to 27.7 MHz with 45%-55% duty cycle."
},
{
"number": "26",
"name": "GPO1",
"type": "output",
"description": "General-purpose output 1, programmable via control registers 0x1B-0x1E."
},
{
"number": "27",
"name": "GPO2",
"type": "output",
"description": "General-purpose output 2, programmable via control registers 0x1B-0x1E."
},
{
"number": "28",
"name": "GPO3",
"type": "output",
"description": "General-purpose output 3, programmable via control registers 0x1B-0x1E."
},
{
"number": "29",
"name": "GPO4",
"type": "output",
"description": "General-purpose output 4, programmable via control registers 0x1B-0x1E."
},
{
"number": "30",
"name": "DGND2",
"type": "power_in",
"description": "DIR line receiver bias and DIT line driver digital ground."
},
{
"number": "31",
"name": "TX-",
"type": "output",
"description": "DIT line driver inverting output; differential output across TX+ and TX- is 5.4 VPP typical into RL = 110 Ω."
},
{
"number": "32",
"name": "TX+",
"type": "output",
"description": "DIT line driver noninverting output; differential output across TX+ and TX- is 5.4 VPP typical into RL = 110 Ω."
},
{
"number": "33",
"name": "VDD33",
"type": "power_in",
"description": "DIR line receiver bias and DIT line driver supply, +3.3V nominal (recommended range +3.0 V to +3.6 V)."
},
{
"number": "34",
"name": "AESOUT",
"type": "output",
"description": "DIT buffered AES3-encoded CMOS logic-level data output."
},
{
"number": "35",
"name": "BLS",
"type": "bidirectional",
"description": "DIT block start clock; configurable as input (default) or output via the BLSM bit."
},
{
"number": "36",
"name": "SYNC",
"type": "output",
"description": "DIT internal sync clock output."
},
{
"number": "37",
"name": "BCKA",
"type": "bidirectional",
"description": "Audio serial Port A bit clock."
},
{
"number": "38",
"name": "LRCKA",
"type": "bidirectional",
"description": "Audio serial Port A left/right clock."
},
{
"number": "39",
"name": "SDINA",
"type": "input",
"description": "Audio serial Port A data input."
},
{
"number": "40",
"name": "SDOUTA",
"type": "output",
"description": "Audio serial Port A data output."
},
{
"number": "41",
"name": "NC",
"type": "unconnected",
"description": "No internal signal connection; internally bonded to the ESD pad."
},
{
"number": "42",
"name": "VIO",
"type": "power_in",
"description": "Logic I/O supply, +1.65V to +3.6V."
},
{
"number": "43",
"name": "DGND3",
"type": "power_in",
"description": "Logic I/O ground."
},
{
"number": "44",
"name": "BGND",
"type": "power_in",
"description": "Substrate ground; connect to AGND (pin 10) by a PCB trace."
},
{
"number": "45",
"name": "SDOUTB",
"type": "output",
"description": "Audio serial Port B data output."
},
{
"number": "46",
"name": "SDINB",
"type": "input",
"description": "Audio serial Port B data input."
},
{
"number": "47",
"name": "LRCKB",
"type": "bidirectional",
"description": "Audio serial Port B left/right clock."
},
{
"number": "48",
"name": "BCKB",
"type": "bidirectional",
"description": "Audio serial Port B bit clock."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin-to-number mapping was taken from the PIN DESCRIPTIONS table (PFB column, pp.10–11), which covers; Pin types are inferred from the datasheet's I/O column and text. Ground and supply pins are mapped t; The datasheet's PIN DESCRIPTIONS table does not give a description for NC beyond 'no internal signal"
],
"pages_sent": 22,
"cost_usd": 0.4188,
"at": "2026-11-13T17:23:46"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/src4392",
"pages": 95,
"sha256": "873894c2c2b1048a",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 48,
"described": 48,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "src4392ipfbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "14ca7676e4932e92f0eca0c6d56ce3018cd28a2531204a70ab7bbacb3eeb3cf5",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "src4392ipfbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f8463328d8068506fc232c9b72f7687648ea565f0d9a0687689fa6701e33210e",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PFB0048A",
"source_page": 92,
"D": {
"nom_mm": 7.0,
"range_mm": [
6.8,
7.2
]
},
"E1": {
"nom_mm": 7.0,
"range_mm": [
6.8,
7.2
]
},
"E": {
"nom_mm": 9.0,
"range_mm": [
8.8,
9.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.2,
"range_mm": [
null,
1.2
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "src4392ipfbr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}