Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SR2HARU

STMicroelectronics · Supervisor And Reset ICs · UDFN-6(1.3x1.6)

SR2HARU from STMicroelectronics, in a UDFN-6(1.3x1.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Ground pin for the device, providing return path for supply current.
2 SR1 input Secondary push-button Smart Reset input, active low, with optional pull-up resistor; requires simultaneous assertion with SR0 for at least tSRC to trigger reset output.
3 RST output Reset output, active low, open drain type, maximum output voltage low 0.3 V when sinking 3.2 mA at VCC = 4.5 V.
4 NC unconnected Not connected pin (not bonded); should be connected to VSS.
5 SR0 input Primary push-button Smart Reset input, active low, with optional pull-up resistor; requires simultaneous assertion with SR1 for at least tSRC to trigger reset output; test mode triggered by overvoltage above VCC + 0.9 V.
6 VCC power_in Positive supply voltage for the device, operating range 1.65 V to 5.5 V; recommend 0.1 µF decoupling capacitor to VSS.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UDFN-6(1.3x1.6)
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: SR2HARU
  • Footprint: Package_DFN_QFN:DFN-6_1.6x1.3mm_P0.4mm
  • 3D model: UDFN-6(1.3x1.6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: sr2haru-etched.step / sr2haru-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sr2haru.step / sr2haru.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (22 pp, sha256 08d927275f1457ef, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF