← Commit history
page.json+8−5@@ -32,13 +32,13 @@ "number": "1", "name": "EN", "type": "input",- "description": "Enable input. TTL-compatible: logic low (<0.8V) shuts the regulator down to <500\u00b5A; logic high (>2.4V) turns the regulator on. Approximately 20\u00b5A flows through the pin when the regulator is active."+ "description": "Enable input. TTL-compatible: logic low (<0.8V) shuts the regulator down to <500µA; logic high (>2.4V) turns the regulator on. Approximately 20µA flows through the pin when the regulator is active." }, { "number": "2", "name": "VIN", "type": "power_in",- "description": "Regulator input supply. Operating range up to 16V continuous (20V absolute max for <100ms). A 6.8\u00b5F (or larger) input capacitor is recommended, plus 0.1\u00b5F ceramic near the pin if the source has high AC impedance."+ "description": "Regulator input supply. Operating range up to 16V continuous (20V absolute max for <100ms). A 6.8µF (or larger) input capacitor is recommended, plus 0.1µF ceramic near the pin if the source has high AC impedance." }, { "number": "3",@@ -50,13 +50,13 @@ "number": "4", "name": "VOUT", "type": "power_out",- "description": "Regulator output. Delivers up to 3A with 600mV typical dropout at full load. Requires a minimum 10\u00b5F aluminum output capacitor for stability across all load conditions; a tantalum output cap is recommended for faster transient response."+ "description": "Regulator output. Delivers up to 3A with 600mV typical dropout at full load. Requires a minimum 10µF aluminum output capacitor for stability across all load conditions; a tantalum output cap is recommended for faster transient response." }, { "number": "5", "name": "ADJ", "type": "input",- "description": "Adjust / feedback pin for setting output voltage via an external R1/R2 divider from VOUT to GND: VOUT = 1.240V \u00d7 (1 + R1/R2). Reference voltage is 1.240V typical; adjust-pin bias current is ~40nA typ (120nA max). R2 recommended between 10k\u03a9 and 47k\u03a9."+ "description": "Adjust / feedback pin for setting output voltage via an external R1/R2 divider from VOUT to GND: VOUT = 1.240V × (1 + R1/R2). Reference voltage is 1.240V typical; adjust-pin bias current is ~40nA typ (120nA max). R2 recommended between 10kΩ and 47kΩ." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/spx29302t5-l-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }