Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SPD127R-103M

Delevan · Inductors, Coils, Chokes · Nonstandard

SPD127R-103M from Delevan, in a Nonstandard. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer Delevan
Package Nonstandard
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance L 10 µH Test frequency 100 kHz 1
Inductance tolerance -20 20 % 1
DC resistance maximum DCR 0.04 ohms 1
Current rating typical 5.4 A 25°C ambient; maximum DC current causing 40°C max temperature rise and inductance not decreasing more than 10% from zero DC value 1
Operating temperature range -55 125 °C 1

CAD (Adom-generated)

  • Symbol: SPD127R-103M
  • Footprint: Adom_Gen:Delevan_SPD127
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Delevan datasheet (1 pp, sha256 edfa65a4cf06705b, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF