SP6201EM5-L-3-3

{
  "slug": "sp6201em5-l-3-3",
  "version": "0.1.0",
  "type": "component",
  "description": "MaxLinear Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sp6201em5-l-3-3",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sp6201em5-l-3-3.kicad_sym",
    "sp6201em5-l-3-3.kicad_mod",
    "sp6201em5-l-3-3.glb",
    "sp6201em5-l-3-3.step",
    "sp6201em5-l-3-3.lbr",
    "docs/hero.png",
    "docs/sp6201em5-l-3-3-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sp6201em5-l-3-3-hero.glb",
    "sp6201em5-l-3-3-hero.overlay.json",
    "sp6201em5-l-3-3-etched.glb"
  ],
  "component": {
    "mpn": "SP6201EM5-L-3-3",
    "manufacturer": "MaxLinear",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579713143049801728",
    "parts": {
      "symbol": "sp6201em5-l-3-3.kicad_sym",
      "footprint": "sp6201em5-l-3-3.kicad_mod",
      "model_3d": "sp6201em5-l-3-3-hero.glb",
      "model_3d_plain": "sp6201em5-l-3-3-etched.glb",
      "model_3d_step": "sp6201em5-l-3-3-etched.step",
      "model_3d_step_plain": "sp6201em5-l-3-3.step",
      "lbr": "sp6201em5-l-3-3.lbr"
    },
    "distributor_links": {
      "lcsc": "C6859",
      "digikey": "1016-1203-ND",
      "mouser": "701-SP6201EM5-L-3-3"
    },
    "distributor_check": {
      "checked_at": "2026-10-14T01:07:50Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1016-1203-ND",
        "status": "found",
        "lifecycle": "Discontinued at DigiKey"
      },
      "mouser": {
        "pn": "701-SP6201EM5-L-3-3",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Power supply input, specified for +2.5V to +6V operation (absolute maximum -2V to 7V), with a 1µF or higher ceramic or tantalum bypass capacitor from VIN to GND."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; the ground pin current is the regulator quiescent current, typically 28µA at a 100µA load."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "CMOS/TTL-compatible enable input where logic high enables and logic low shuts down the regulator, with VIL maximum 0.4V, VIH minimum 1.6V, and absolute maximum rating of -2V to 7V."
      },
      {
        "number": "4",
        "name": "RST",
        "type": "output",
        "description": "On the fixed-voltage version this is an open-drain reset-not (VOUT good) output that indicates VOUT is in regulation, asserting when VOUT is about 4% below nominal with 1% hysteresis."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output voltage (VOUT), which needs an output capacitor of at least 1µF ceramic for stability with ESR below 5Ω."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 4 changes function by variant: on the fixed-voltage parts (this MPN, SP6201EM5-L-3-3) it is the ; The pin assignment figure (Fig. 3) is an image and was not extracted. Pin numbers and names come fro; The datasheet does not specify an explicit pin type for the open-drain reset output; 'output' was ch"
        ],
        "pages_sent": 17,
        "cost_usd": 0.064,
        "at": "2026-10-14T01:07:32"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579713143049801728",
        "pages": 17,
        "sha256": "6f7df995243e9eab",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sp6201em5-l-3-3.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-14",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sp6201em5-l-3-3-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d3a4bea47ddacd083545060ebbca16b8d040e7fb916d4be463fe3556fab64c4b",
        "checked": "2026-10-14",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}