main
Ray
Publish 0.1.0
2ff6163
SP3485CN-L
MaxLinear · RS-485 / RS-422 ICs · SOIC-8
SP3485CN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low it goes HIGH for A-B at or above +0.2 V, LOW for A-B at or below -0.2 V, and HIGH for open inputs (fail-safe), and it is tri-stated when RE is high. |
| 2 | RE | input | Receiver output enable, active LOW: a logic LOW enables RO and a logic HIGH disables the receiver output; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum. |
| 3 | DE | input | Driver output enable, active HIGH: a logic HIGH enables the differential driver outputs and a logic LOW tri-states them; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum. |
| 4 | DI | input | Driver input: with DE high, DI high drives A high and B low and DI low drives A low and B high; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum. |
| 5 | GND | power_in | Ground connection for the device. |
| 6 | A | bidirectional | Non-inverting driver output and receiver input; the bus common-mode range is -7 V to +12 V and the receiver input resistance is 12 kΩ minimum. |
| 7 | B | bidirectional | Inverting driver output and receiver input; the bus common-mode range is -7 V to +12 V and the receiver input resistance is 12 kΩ minimum. |
| 8 | VCC | power_in | Positive supply, specified at +3.3 V ±5% (absolute maximum +6.0 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) absolute maximum | VCC | 6 | V | 2 | |||
| Logic input voltage (absolute maximum) | -0.3 | 6 | V | Input Voltages - Logic | 2 | ||
| Driver input voltage (absolute maximum) | -0.3 | 6 | V | Input Voltages - Drivers | 2 | ||
| Receiver input voltage (absolute maximum) | -15 | 15 | V | Input Voltages - Receivers, printed as +/-15V | 2 | ||
| Driver output voltage (absolute maximum) | -15 | 15 | V | Output Voltages - Drivers, printed as +/-15V | 2 | ||
| Receiver output voltage (absolute maximum) | -0.3 | 6 | V | Output Voltages - Receivers | 2 | ||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Supply voltage tolerance | VCC | -5 | 5 | % | VCC = +3.3V +/-5%; TAMB = TMIN to TMAX unless otherwise noted | 2 | |
| Ambient operating temperature range (SP3485CN-L) | TAMB | 0 | 70 | °C | Ordering information for SP3485CN-L (0°C to +70°C) | 9 | |
| Input high voltage | VIH | 2 | V | Applies to DE, DI, RE | 2 | ||
| Input low voltage | VIL | 0.8 | V | Applies to DE, DI, RE | 2 | ||
| Input current | -10 | 10 | µA | Applies to DE, DI, RE | 2 | ||
| Differential output voltage with load (RS-422) | VOD | 2 | Vcc Volts | With Load; R = 50Ω (RS-422); Figure 1 | 2 | ||
| Differential output voltage with load (RS-485) | VOD | 1.5 | Vcc Volts | With Load; R = 27Ω (RS-485); Figure 1 | 2 | ||
| Change in magnitude of driver differential output voltage for complementary states | ΔVOD | 0.2 | V | R = 27Ω or R = 50Ω; Figure 1 | 2 | ||
| Driver common mode output voltage | VOC | 3 | V | R = 27Ω or R = 50Ω; Figure 1 | 2 | ||
| Driver short circuit current, VOUT = HIGH | IOS | -250 | 250 | mA | -7V ≤ VO ≤ +12V; Figure 8 | 2 | |
| Driver short circuit current, VOUT = LOW | IOS | -250 | 250 | mA | -7V ≤ VO ≤ +12V; Figure 8 | 2 | |
| Driver input to output propagation delay, tPLH | tPLH | 20 | 40 | 60 | ns | Figures 2 & 9 | 2 |
| Driver input to output propagation delay, tPHL | tPHL | 20 | 40 | 60 | ns | Figures 2 & 9 | 2 |
| Differential driver skew | /tDO1 - tDO2/ | 2 | 10 | ns | Figures 2 and 10 | 2 | |
| Driver rise or fall time | 5 | 20 | ns | From 10%-90%; Figures 3 and 10 | 2 | ||
| Driver enable to output high | 52 | 120 | ns | Figures 4 and 11 | 3 | ||
| Driver enable to output low | 60 | 120 | ns | Figures 5 and 11 | 3 | ||
| Driver disable time from low | 40 | 120 | ns | Figures 5 and 11 | 3 | ||
| Driver disable time from high | 60 | 120 | ns | Figures 4 and 11 | 3 | ||
| Differential input threshold | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ +12V | 3 | |
| Output voltage LOW | VOL | 0.4 | V | VID = -200mV, 2.5mA | 3 | ||
| Three-state (high impedance) output current | IOZR | -1 | 1 | µA | 0V ≤ VO ≤ VCC; RE = VCC | 3 | |
| Input resistance | RIN | 12 | 15 | kΩ | -7V ≤ VCM ≤ +12V | 3 | |
| Input current (A, B), VIN = 12V | IIN | 1 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = 12V | 3 | ||
| Input current (A, B), VIN = -7V | IIN | -0.8 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = -7V | 3 | ||
| Short circuit current | IOS | 7 | 60 | mA | 0V ≤ VCM ≤ VCC | 3 | |
| Receiver input to output propagation delay, tPLH | tPLH | 40 | 70 | 100 | ns | Figures 6 and 12 | 3 |
| Receiver input to output propagation delay, tPHL | tPHL | 40 | 70 | 100 | ns | Figures 6 and 12 | 3 |
| Differential receiver skew | tRSKEW | 4 | ns | tRSKEW = /tRPHL - tRPLH/, Figures 6 and 12 | 3 | ||
| Receiver enable to output low | 35 | 60 | ns | Figures 7 and 13, S1 closed, S2 open | 3 | ||
| Receiver enable to output high | 35 | 60 | ns | Figures 7 and 13, S2 closed, S1 open | 3 | ||
| Receiver disable from low | 35 | 60 | ns | Figures 7 and 13, S1 closed, S2 open | 3 | ||
| Receiver disable from high | 35 | 60 | ns | Figures 7 and 13, S2 closed, S1 open | 3 | ||
| Supply current, no load (driver enabled) | ICC | 1000 | 2000 | µA | RE, DI = 0V or VCC; DE = VCC | 3 | |
| Supply current, no load (driver disabled) | ICC | 800 | 1500 | µA | RE = 0V, DI = 0V or VCC, DE = 0V | 3 |
CAD (KiCad official)
- Symbol:
SP3485CN-L - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sp3485cn-l-etched.step/sp3485cn-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp3485cn-l.step/sp3485cn-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (9 pp, sha256
b01eb091aab969e3, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SP3485CN-L
**MaxLinear** · RS-485 / RS-422 ICs · SOIC-8
SP3485CN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low it goes HIGH for A-B at or above +0.2 V, LOW for A-B at or below -0.2 V, and HIGH for open inputs (fail-safe), and it is tri-stated when RE is high. |
| 2 | RE | input | Receiver output enable, active LOW: a logic LOW enables RO and a logic HIGH disables the receiver output; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum. |
| 3 | DE | input | Driver output enable, active HIGH: a logic HIGH enables the differential driver outputs and a logic LOW tri-states them; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum. |
| 4 | DI | input | Driver input: with DE high, DI high drives A high and B low and DI low drives A low and B high; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum. |
| 5 | GND | power_in | Ground connection for the device. |
| 6 | A | bidirectional | Non-inverting driver output and receiver input; the bus common-mode range is -7 V to +12 V and the receiver input resistance is 12 kΩ minimum. |
| 7 | B | bidirectional | Inverting driver output and receiver input; the bus common-mode range is -7 V to +12 V and the receiver input resistance is 12 kΩ minimum. |
| 8 | VCC | power_in | Positive supply, specified at +3.3 V ±5% (absolute maximum +6.0 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) absolute maximum | VCC | | | 6 | V | | 2 |
| Logic input voltage (absolute maximum) | | -0.3 | | 6 | V | Input Voltages - Logic | 2 |
| Driver input voltage (absolute maximum) | | -0.3 | | 6 | V | Input Voltages - Drivers | 2 |
| Receiver input voltage (absolute maximum) | | -15 | | 15 | V | Input Voltages - Receivers, printed as +/-15V | 2 |
| Driver output voltage (absolute maximum) | | -15 | | 15 | V | Output Voltages - Drivers, printed as +/-15V | 2 |
| Receiver output voltage (absolute maximum) | | -0.3 | | 6 | V | Output Voltages - Receivers | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Supply voltage tolerance | VCC | -5 | | 5 | % | VCC = +3.3V +/-5%; TAMB = TMIN to TMAX unless otherwise noted | 2 |
| Ambient operating temperature range (SP3485CN-L) | TAMB | 0 | | 70 | °C | Ordering information for SP3485CN-L (0°C to +70°C) | 9 |
| Input high voltage | VIH | 2 | | | V | Applies to DE, DI, RE | 2 |
| Input low voltage | VIL | | | 0.8 | V | Applies to DE, DI, RE | 2 |
| Input current | | -10 | | 10 | µA | Applies to DE, DI, RE | 2 |
| Differential output voltage with load (RS-422) | VOD | 2 | | | Vcc Volts | With Load; R = 50Ω (RS-422); Figure 1 | 2 |
| Differential output voltage with load (RS-485) | VOD | 1.5 | | | Vcc Volts | With Load; R = 27Ω (RS-485); Figure 1 | 2 |
| Change in magnitude of driver differential output voltage for complementary states | ΔVOD | | | 0.2 | V | R = 27Ω or R = 50Ω; Figure 1 | 2 |
| Driver common mode output voltage | VOC | | | 3 | V | R = 27Ω or R = 50Ω; Figure 1 | 2 |
| Driver short circuit current, VOUT = HIGH | IOS | -250 | | 250 | mA | -7V ≤ VO ≤ +12V; Figure 8 | 2 |
| Driver short circuit current, VOUT = LOW | IOS | -250 | | 250 | mA | -7V ≤ VO ≤ +12V; Figure 8 | 2 |
| Driver input to output propagation delay, tPLH | tPLH | 20 | 40 | 60 | ns | Figures 2 & 9 | 2 |
| Driver input to output propagation delay, tPHL | tPHL | 20 | 40 | 60 | ns | Figures 2 & 9 | 2 |
| Differential driver skew | /tDO1 - tDO2/ | | 2 | 10 | ns | Figures 2 and 10 | 2 |
| Driver rise or fall time | | | 5 | 20 | ns | From 10%-90%; Figures 3 and 10 | 2 |
| Driver enable to output high | | | 52 | 120 | ns | Figures 4 and 11 | 3 |
| Driver enable to output low | | | 60 | 120 | ns | Figures 5 and 11 | 3 |
| Driver disable time from low | | | 40 | 120 | ns | Figures 5 and 11 | 3 |
| Driver disable time from high | | | 60 | 120 | ns | Figures 4 and 11 | 3 |
| Differential input threshold | VTH | -0.2 | | 0.2 | V | -7V ≤ VCM ≤ +12V | 3 |
| Output voltage LOW | VOL | | | 0.4 | V | VID = -200mV, 2.5mA | 3 |
| Three-state (high impedance) output current | IOZR | -1 | | 1 | µA | 0V ≤ VO ≤ VCC; RE = VCC | 3 |
| Input resistance | RIN | 12 | 15 | | kΩ | -7V ≤ VCM ≤ +12V | 3 |
| Input current (A, B), VIN = 12V | IIN | | | 1 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = 12V | 3 |
| Input current (A, B), VIN = -7V | IIN | -0.8 | | | mA | DE = 0V, VCC = 0V or 3.6V, VIN = -7V | 3 |
| Short circuit current | IOS | 7 | | 60 | mA | 0V ≤ VCM ≤ VCC | 3 |
| Receiver input to output propagation delay, tPLH | tPLH | 40 | 70 | 100 | ns | Figures 6 and 12 | 3 |
| Receiver input to output propagation delay, tPHL | tPHL | 40 | 70 | 100 | ns | Figures 6 and 12 | 3 |
| Differential receiver skew | tRSKEW | | | 4 | ns | tRSKEW = /tRPHL - tRPLH/, Figures 6 and 12 | 3 |
| Receiver enable to output low | | | 35 | 60 | ns | Figures 7 and 13, S1 closed, S2 open | 3 |
| Receiver enable to output high | | | 35 | 60 | ns | Figures 7 and 13, S2 closed, S1 open | 3 |
| Receiver disable from low | | | 35 | 60 | ns | Figures 7 and 13, S1 closed, S2 open | 3 |
| Receiver disable from high | | | 35 | 60 | ns | Figures 7 and 13, S2 closed, S1 open | 3 |
| Supply current, no load (driver enabled) | ICC | | 1000 | 2000 | µA | RE, DI = 0V or VCC; DE = VCC | 3 |
| Supply current, no load (driver disabled) | ICC | | 800 | 1500 | µA | RE = 0V, DI = 0V or VCC, DE = 0V | 3 |
## CAD (KiCad official)
- Symbol: `SP3485CN-L`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `sp3485cn-l-etched.step` / `sp3485cn-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sp3485cn-l.step` / `sp3485cn-l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MaxLinear datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588903019778228224) (9 pp, sha256 `b01eb091aab969e3`, retrieved 2026-10-16, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sp3485cn-l-datasheet.pdf)