main
History Download
Ray Publish 0.1.0 c38cd9d

SP3483EN-HXY

HXY MOSFET · RS-485/RS-422 ICs · SOP-8

SP3483EN-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output, high when A-B ≥ +0.2V and low when A-B ≤ -0.2V; high impedance when the receiver is disabled (RE high).
2 RE input Active-low receiver enable; drive low to enable the receiver, high to disable it (RO high impedance), and with DE low it puts the device into shutdown.
3 DE input Driver enable; drive high to enable the driver outputs, low to put them in high impedance, and with RE high it puts the device into shutdown.
4 DI input Driver input; a low on DI forces the non-inverting output A low and B high, and a high forces A high and B low (input range -0.3V to 7V).
5 GND power_in Ground.
6 A bidirectional Non-inverting receiver input and non-inverting driver output, rated -7.5V to +12.5V with ±15kV HBM ESD protection.
7 B bidirectional Inverting receiver input and inverting driver output, rated -7.5V to +12.5V with ±15kV HBM ESD protection.
8 VCC power_in Positive supply, 3.3V ±0.3V operation, absolute maximum 7V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Driver Output (with load) VOD2 2 V R = 54Ω (RS-422) 2
Differential Driver Output (with load) VOD2 1.5 V R = 60Ω (RS-485) 2
Change in Magnitude of Driver Differential Output Voltage ΔVOD 0.2 V R = 54Ω or 100Ω 2
Driver Common-Mode Output Voltage VOC 3 V R = 54Ω or 100Ω 2
Change in Magnitude of Driver Common-Mode Output Voltage ΔVOD 0.2 V R = 54Ω or 100Ω 2
Input High Voltage VIH 2 V DE, DI, RE 2
Input Low Voltage VIL 0.8 V DE, DI, RE 2
Input Current IIN1 -2 2 µA DE, DI, RE 2
Receiver Differential Threshold Voltage VTH -0.2 0.2 V -7V ≤ VCM ≤ 12V 2
Receiver Output Low Voltage VOL 0.4 V IO = 2.5mA, VID = -200mV 2
Three-State Output Current at Receiver IOZR -1 1 µA 0.4V ≤ VO ≤ 2.4V 2
Receiver Input Hysteresis ΔVTH 50 mV VCM = 0V 2
Maximum Data Rate fMAX 250 kbps 3
Time to Shutdown tSHDN 80 190 300 ns 3
Receiver Propagation Delay, Low-to-High tRPLH 25 75 120 ns VID = 0 to 3.0, CL = 15pF 3
Receiver Propagation Delay, High-to-Low tRPHL 25 75 120 ns VID = 0 to 3.0, CL = 15pF 3
Receiver Propagation Delay Skew tRPDS -20 12 20 ns VID = 0 to 3.0, CL = 15pF 3
Receiver Output Enable Time to Low Level tPRZL 25 50 ns CL = 15pF 3
Receiver Output Enable Time to High Level tPRZH 25 50 ns CL = 15pF 3
Receiver Output Disable Time from High Level tPRHZ 25 45 ns CL = 15pF 3
Receiver Output Disable Time from Low Level tPRLZ 25 45 ns CL = 15pF 3
Receiver Output Enable Time from Shutdown to Low Level tPRSL 720 1400 ns CL = 15pF 3
Receiver Output Enable Time from Shutdown to High Level tPRSH 720 1400 ns CL = 15pF 3
Supply Voltage VCC 7 V 1
Control Input Voltage -0.3 7 V 1
Driver Input Voltage (DI) DI -0.3 7 V 1
Driver Output Voltage (A, B) -7.5 12.5 V 1
Receiver Input Voltage (A, B) -7.5 12.5 V 1
Receiver Output Voltage (RO) RO -0.3 V max is (VCC + 0.3V) 1
Continuous Power Dissipation 471 mW TA = +70°C, 8-Pin SO, derate 5.88mW/°C above +70°C 1
Operating Temperature Range 0 70 °C 1
Storage Temperature Range -65 150 °C 1
Lead Temperature 300 °C soldering, 10sec 1

CAD (KiCad official)

  • Symbol: SP3483EN-HXY
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sp3483en-hxy-etched.step / sp3483en-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp3483en-hxy.step / sp3483en-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (11 pp, sha256 2553040a6e0cdf92, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF