component
SP3238EEA-L
Public Made by Adomby adom
MaxLinear RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
sp3238eea-l: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
815f02e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297
{
"slug": "sp3238eea-l",
"version": "0.1.0",
"type": "component",
"description": "MaxLinear RS232 ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"sp3238eea-l",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sp3238eea-l.kicad_sym",
"sp3238eea-l.kicad_mod",
"sp3238eea-l.glb",
"sp3238eea-l.step",
"sp3238eea-l.lbr",
"docs/hero.png",
"docs/sp3238eea-l-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "SP3238EEA-L",
"manufacturer": "MaxLinear",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Interface",
"subcategory": "RS232 ICs",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202791123824640",
"parts": {
"symbol": "sp3238eea-l.kicad_sym",
"footprint": "sp3238eea-l.kicad_mod",
"model_3d": "sp3238eea-l-etched.glb",
"model_3d_plain": "sp3238eea-l.glb",
"model_3d_step": "sp3238eea-l-etched.step",
"model_3d_step_plain": "sp3238eea-l.step",
"lbr": "sp3238eea-l.lbr"
},
"distributor_links": {
"lcsc": "C49669"
},
"pins": [
{
"number": "1",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of the symmetrical charge-pump capacitor C2; connect to external 0.1µF to 0.33µF capacitor."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "3",
"name": "C2-",
"type": "passive",
"description": "Negative terminal of the symmetrical charge-pump capacitor C2; connect to external 0.1µF to 0.33µF capacitor."
},
{
"number": "4",
"name": "V-",
"type": "power_out",
"description": "Regulated -5.5V output generated by the internal charge pump; maximum magnitude 7V per absolute maximum ratings."
},
{
"number": "5",
"name": "T1OUT",
"type": "output",
"description": "RS-232 Driver Output for transmitter 1; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."
},
{
"number": "6",
"name": "T2OUT",
"type": "output",
"description": "RS-232 Driver Output for transmitter 2; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."
},
{
"number": "7",
"name": "T3OUT",
"type": "output",
"description": "RS-232 Driver Output for transmitter 3; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."
},
{
"number": "8",
"name": "R1IN",
"type": "input",
"description": "RS-232 receiver input for channel 1; input voltage range -25V to +25V with input hysteresis 0.5V typical."
},
{
"number": "9",
"name": "R2IN",
"type": "input",
"description": "RS-232 receiver input for channel 2; input voltage range -25V to +25V with input hysteresis 0.5V typical."
},
{
"number": "10",
"name": "T4OUT",
"type": "output",
"description": "RS-232 Driver Output for transmitter 4; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."
},
{
"number": "11",
"name": "R3IN",
"type": "input",
"description": "RS-232 receiver input for channel 3; input voltage range -25V to +25V with input hysteresis 0.5V typical."
},
{
"number": "12",
"name": "T5OUT",
"type": "output",
"description": "RS-232 Driver Output for transmitter 5; voltage swing +5.0V minimum fully loaded with 3kΩ, short-circuit duration continuous."
},
{
"number": "13",
"name": "ONLINE",
"type": "input",
"description": "Logic input (0 to VCC) to override AUTO ON-LINE® circuitry; logic HIGH keeps drivers active when SHUTDOWN is also HIGH."
},
{
"number": "14",
"name": "SHUTDOWN",
"type": "input",
"description": "Logic input (0 to VCC) to shut down drivers and charge pump; logic LOW activates shutdown mode with supply current less than 1µA."
},
{
"number": "15",
"name": "STATUS",
"type": "output",
"description": "TTL/CMOS Output indicating if RS-232 signal is present on any receiver input; goes HIGH when external transmitters enabled and cable connected."
},
{
"number": "16",
"name": "R1OUT",
"type": "output",
"description": "Non-Inverting receiver output from channel 1; active in shutdown mode, drives 0.4V LOW to (VCC-0.1V) HIGH with 1.6mA sink or 1.0mA source."
},
{
"number": "17",
"name": "T5IN",
"type": "input",
"description": "TTL/CMOS driver input for transmitter 5; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."
},
{
"number": "18",
"name": "R3OUT",
"type": "output",
"description": "TTL/CMOS receiver output from channel 3; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled."
},
{
"number": "19",
"name": "T4IN",
"type": "input",
"description": "TTL/CMOS driver input for transmitter 4; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."
},
{
"number": "20",
"name": "R2OUT",
"type": "output",
"description": "TTL/CMOS receiver output from channel 2; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled."
},
{
"number": "21",
"name": "R1OUT",
"type": "output",
"description": "TTL/CMOS receiver output from channel 1; drives 0.4V LOW to (VCC-0.1V) HIGH, high-impedance when receivers disabled."
},
{
"number": "22",
"name": "T3IN",
"type": "input",
"description": "TTL/CMOS driver input for transmitter 3; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."
},
{
"number": "23",
"name": "T2IN",
"type": "input",
"description": "TTL/CMOS driver input for transmitter 2; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."
},
{
"number": "24",
"name": "T1IN",
"type": "input",
"description": "TTL/CMOS driver input for transmitter 1; accepts 0 to VCC logic levels with 0.8V LOW and 2.4V HIGH thresholds."
},
{
"number": "25",
"name": "C1-",
"type": "passive",
"description": "Negative terminal of the symmetrical charge-pump capacitor C1; connect to external 0.1µF to 0.047µF capacitor."
},
{
"number": "26",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input; +3.0V to +5.5V operating range with maximum ICC ±100mA."
},
{
"number": "27",
"name": "V+",
"type": "power_out",
"description": "Regulated +5.5V output generated by the internal charge pump; maximum magnitude 7V per absolute maximum ratings."
},
{
"number": "28",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of the symmetrical charge-pump capacitor C1; connect to external 0.1µF to 0.047µF capacitor."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pins 16 and 21 both named R1OUT per datasheet Table 1: pin 16 is the non-inverting always-active rec"
],
"pages_sent": 20,
"cost_usd": 0.3108,
"at": "2026-09-21T19:26:52"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202791123824640",
"pages": 20,
"sha256": "509a9d06aa065a68",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sp3238eea-l.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sp3238eea-l-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "133093cf60731bfe45aea5a2595a1fef6d1ed9f9c894cabc231cc5f29bdf70af",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}