main
Ray
Publish 0.1.0
48cf4d4
SP3232EEY-MS
MSKSEMI · RS232 ICs · TSSOP-16
SP3232EEY-MS from MSKSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal for the first charge pump capacitor, which is connected between C1+ and C1-. |
| 2 | V+ | power_out | Doubled voltage terminal generated by the dual charge pump, specified at +5.5 V output and limited to VCC-0.3 to +7 V absolute maximum. |
| 3 | C1- | passive | Negative terminal for the first charge pump capacitor, which is connected between C1+ and C1-. |
| 4 | C2+ | passive | Positive terminal for the second charge pump capacitor, which is connected between C2+ and C2-. |
| 5 | C2- | passive | Negative terminal for the second charge pump capacitor, which is connected between C2+ and C2-. |
| 6 | V- | power_out | Inverted voltage terminal generated by the charge pump, with an absolute limit of +0.3 to -7 V. |
| 7 | T2OUT | output | Second RS-232 transmitter output, with an output voltage range of ±13.2 V. |
| 8 | R2IN | input | Second RS-232 receiver input, with an input voltage range of ±25 V and a typical input impedance of 3 to 7 kΩ. |
| 9 | R2OUT | output | Second receiver CMOS logic output, with a range of -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second transmitter logic input, with an absolute range of -0.3 to +6 V, logic-high threshold of 2 V minimum and logic-low threshold of 0.8 V maximum; it has no internal pull-up and may be tied to GND or VCC if unused. |
| 11 | T1IN | input | First transmitter logic input, with an absolute range of -0.3 to +6 V, logic-high threshold of 2 V minimum and logic-low threshold of 0.8 V maximum; it has no internal pull-up and may be tied to GND or VCC if unused. |
| 12 | R1OUT | output | First receiver CMOS logic output, with a range of -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First RS-232 receiver input, with an input voltage range of ±25 V and a typical input impedance of 3 to 7 kΩ. |
| 14 | T1OUT | output | First RS-232 transmitter output, with an output voltage range of ±13.2 V. |
| 15 | GND | power_in | Ground reference for all device voltages. |
| 16 | VCC | power_in | Supply voltage, specified for 3 V to 5.5 V operation with an absolute maximum of -0.3 to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Doubled voltage terminal | V+ | 7 | V | 4 | |||
| Inverted voltage terminal | V- | -7 | 0.3 | V | 4 | ||
| V+ + /V-/ | V+ + /V-/ | 13 | V | 4 | |||
| Transmitter input voltage range | T1IN,T2IN | -0.3 | 6 | V | 4 | ||
| Receiver input voltage range | R1IN,R2IN | -25 | 25 | V | 4 | ||
| Transmitter output voltage range | T1OUT,T2OUT | -13.2 | 13.2 | V | 4 | ||
| Receiver output voltage range | R1OUT,R2OUT | -0.3 | V | 4 | |||
| Operating temperature | -40 | 85 | ℃ | 4 | |||
| Storage temperature | -60 | 150 | ℃ | 4 | |||
| Soldering temperature | 300 | ℃ | 4 | ||||
| Continuous power | 760 | mW | 4 | ||||
| Supply voltage range (features list) | 3 | 5.5 | V | 2 | |||
| Logic control low level | VTTIN_L | 0.8 | V | T1IN,T2IN | 5 | ||
| Logic control high level | VTTIN_H | 2 | V | T1IN,T2IN | 5 | ||
| Input logic current | ITIN | -1 | 1 | μA | T1IN,T2IN | 5 | |
| Receiver output logic-low voltage | VROL | 0.4 | V | IOUT=1.6mA, VCC=5V or 3.3V | 5 | ||
| Receiver input range | VRIN | -25 | 25 | V | 6 | ||
| Receiver input low threshold | VRIL | 0.6 | 1.1 | V | VCC=3.3V | 6 | |
| Receiver input low threshold | VRIL | 0.8 | 1.5 | V | VCC=5V | 6 | |
| Receiver input high threshold | VRIH | 1.5 | 2.4 | V | VCC=3.3V | 6 | |
| Receiver input high threshold | VRIH | 1.9 | 2.4 | V | VCC=5V | 6 | |
| Receiver input impedance | RRIN | 3 | 5 | 7 | kΩ | 6 | |
| Transmitter output swing | VTOUT | -4 | 5 | V | All output ports of transmitter connect 3kΩ load to ground | 6 | |
| ESD HBM (R1IN, R2IN, T1OUT, T2OUT) | -15 | 15 | KV | HBM | 7 | ||
| ESD air discharge (R1IN, R2IN, T1OUT, T2OUT) | -15 | 15 | KV | Air discharge | 7 | ||
| ESD contact discharge (R1IN, R2IN, T1OUT, T2OUT) | -8 | 8 | KV | Contact discharge | 7 | ||
| Transmitter slew rate | SR | 4 | 30 | V/μs | RL=3kΩ |
7 | |
| Supply current with no load | Isup | 2 | mA | 5 | |||
| Logic control hysteresis | 0.3 | V | T1IN,T2IN | 5 | |||
| Receiver input hysteresis | 0.4 | V | 6 | ||||
| Transmitter output impedance | RTOUT | 300 | Ω | VCC=0V, Transmitter Input=±2V | 6 | ||
| Transmitter short-circuit current | Itsc | 60 | mA | 6 | |||
| Rate speed | 120 | kbps | RL=3kΩ, CL=1000pF | 7 | |||
| Receiver propagation delay tRPHL | tRPHL | 300 | ns | CL=150pF | 7 | ||
| Receiver propagation delay tRPLH | tRPLH | 300 | ns | CL=150pF | 7 | ||
| Receiver propagation delay skew | /tRPHL- tRPLH / | 150 | ns | 7 | |||
| Transmitter propagation delay skew | /tTPHL- tTPLH / | 150 | ns | 7 |
CAD (KiCad official)
- Symbol:
SP3232EEY-MS - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sp3232eey-ms-etched.step/sp3232eey-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp3232eey-ms.step/sp3232eey-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (16 pp, sha256
9034d98bbf2a6839, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SP3232EEY-MS
**MSKSEMI** · RS232 ICs · TSSOP-16
SP3232EEY-MS from MSKSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal for the first charge pump capacitor, which is connected between C1+ and C1-. |
| 2 | V+ | power_out | Doubled voltage terminal generated by the dual charge pump, specified at +5.5 V output and limited to VCC-0.3 to +7 V absolute maximum. |
| 3 | C1- | passive | Negative terminal for the first charge pump capacitor, which is connected between C1+ and C1-. |
| 4 | C2+ | passive | Positive terminal for the second charge pump capacitor, which is connected between C2+ and C2-. |
| 5 | C2- | passive | Negative terminal for the second charge pump capacitor, which is connected between C2+ and C2-. |
| 6 | V- | power_out | Inverted voltage terminal generated by the charge pump, with an absolute limit of +0.3 to -7 V. |
| 7 | T2OUT | output | Second RS-232 transmitter output, with an output voltage range of ±13.2 V. |
| 8 | R2IN | input | Second RS-232 receiver input, with an input voltage range of ±25 V and a typical input impedance of 3 to 7 kΩ. |
| 9 | R2OUT | output | Second receiver CMOS logic output, with a range of -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second transmitter logic input, with an absolute range of -0.3 to +6 V, logic-high threshold of 2 V minimum and logic-low threshold of 0.8 V maximum; it has no internal pull-up and may be tied to GND or VCC if unused. |
| 11 | T1IN | input | First transmitter logic input, with an absolute range of -0.3 to +6 V, logic-high threshold of 2 V minimum and logic-low threshold of 0.8 V maximum; it has no internal pull-up and may be tied to GND or VCC if unused. |
| 12 | R1OUT | output | First receiver CMOS logic output, with a range of -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First RS-232 receiver input, with an input voltage range of ±25 V and a typical input impedance of 3 to 7 kΩ. |
| 14 | T1OUT | output | First RS-232 transmitter output, with an output voltage range of ±13.2 V. |
| 15 | GND | power_in | Ground reference for all device voltages. |
| 16 | VCC | power_in | Supply voltage, specified for 3 V to 5.5 V operation with an absolute maximum of -0.3 to +6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 6 | V | | 4 |
| Doubled voltage terminal | V+ | | | 7 | V | | 4 |
| Inverted voltage terminal | V- | -7 | | 0.3 | V | | 4 |
| V+ + /V-/ | V+ + /V-/ | | | 13 | V | | 4 |
| Transmitter input voltage range | T1IN,T2IN | -0.3 | | 6 | V | | 4 |
| Receiver input voltage range | R1IN,R2IN | -25 | | 25 | V | | 4 |
| Transmitter output voltage range | T1OUT,T2OUT | -13.2 | | 13.2 | V | | 4 |
| Receiver output voltage range | R1OUT,R2OUT | -0.3 | | | V | | 4 |
| Operating temperature | | -40 | | 85 | ℃ | | 4 |
| Storage temperature | | -60 | | 150 | ℃ | | 4 |
| Soldering temperature | | | | 300 | ℃ | | 4 |
| Continuous power | | | | 760 | mW | | 4 |
| Supply voltage range (features list) | | 3 | | 5.5 | V | | 2 |
| Logic control low level | VTTIN_L | | | 0.8 | V | T1IN,T2IN | 5 |
| Logic control high level | VTTIN_H | 2 | | | V | T1IN,T2IN | 5 |
| Input logic current | ITIN | -1 | | 1 | μA | T1IN,T2IN | 5 |
| Receiver output logic-low voltage | VROL | | | 0.4 | V | IOUT=1.6mA, VCC=5V or 3.3V | 5 |
| Receiver input range | VRIN | -25 | | 25 | V | | 6 |
| Receiver input low threshold | VRIL | 0.6 | | 1.1 | V | VCC=3.3V | 6 |
| Receiver input low threshold | VRIL | 0.8 | | 1.5 | V | VCC=5V | 6 |
| Receiver input high threshold | VRIH | 1.5 | | 2.4 | V | VCC=3.3V | 6 |
| Receiver input high threshold | VRIH | 1.9 | | 2.4 | V | VCC=5V | 6 |
| Receiver input impedance | RRIN | 3 | 5 | 7 | kΩ | | 6 |
| Transmitter output swing | VTOUT | -4 | 5 | | V | All output ports of transmitter connect 3kΩ load to ground | 6 |
| ESD HBM (R1IN, R2IN, T1OUT, T2OUT) | | -15 | | 15 | KV | HBM | 7 |
| ESD air discharge (R1IN, R2IN, T1OUT, T2OUT) | | -15 | | 15 | KV | Air discharge | 7 |
| ESD contact discharge (R1IN, R2IN, T1OUT, T2OUT) | | -8 | | 8 | KV | Contact discharge | 7 |
| Transmitter slew rate | SR | 4 | | 30 | V/μs | RL=3kΩ~7kΩ, CL=150pF~1000F, from -3.0V~3.0V or from 3.0V~-3.0V | 7 |
| Supply current with no load | Isup | | 2 | | mA | | 5 |
| Logic control hysteresis | | | 0.3 | | V | T1IN,T2IN | 5 |
| Receiver input hysteresis | | | 0.4 | | V | | 6 |
| Transmitter output impedance | RTOUT | | 300 | | Ω | VCC=0V, Transmitter Input=±2V | 6 |
| Transmitter short-circuit current | Itsc | | 60 | | mA | | 6 |
| Rate speed | | | 120 | | kbps | RL=3kΩ, CL=1000pF | 7 |
| Receiver propagation delay tRPHL | tRPHL | | 300 | | ns | CL=150pF | 7 |
| Receiver propagation delay tRPLH | tRPLH | | 300 | | ns | CL=150pF | 7 |
| Receiver propagation delay skew | /tRPHL- tRPLH / | | 150 | | ns | | 7 |
| Transmitter propagation delay skew | /tTPHL- tTPLH / | | 150 | | ns | | 7 |
## CAD (KiCad official)
- Symbol: `SP3232EEY-MS`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `sp3232eey-ms-etched.step` / `sp3232eey-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sp3232eey-ms.step` / `sp3232eey-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904561823932416) (16 pp, sha256 `9034d98bbf2a6839`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sp3232eey-ms-datasheet.pdf)