component

SP3223EBEY-L

Public Made by Adom

by adom

MaxLinear Pre-ordered Chips, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterface icssp3223ebey-lfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 14d ago
viewers sp3223ebey-l: viewers · Ray 14d ago
package.json Publish 0.1.0 · Ray 14d ago
page.json Set visibility: public · Ray 14d ago
README.md Publish 0.1.0 · Ray 14d ago
sp3223ebey-l-etched.glb Publish 0.1.0 · Ray 14d ago
sp3223ebey-l-etched.step sp3223ebey-l: factory component page (tier=mfr) · Ray 14d ago
sp3223ebey-l-hero.glb sp3223ebey-l: hero GLB from the etched model (keeps the MPN mark) · Ray 14d ago
sp3223ebey-l-hero.overlay.json Publish 0.1.0 · Ray 14d ago
sp3223ebey-l.glb Publish 0.1.0 · Ray 14d ago
sp3223ebey-l.kicad_mod Publish 0.1.0 · Ray 14d ago
sp3223ebey-l.kicad_sym Publish 0.1.0 · Ray 14d ago
sp3223ebey-l.lbr Publish 0.1.0 · Ray 14d ago
sp3223ebey-l.step Publish 0.1.0 · Ray 14d ago

SP3223EBEY-L

MaxLinear · Pre-ordered Chips · TSSOP-20

SP3223EBEY-L from MaxLinear, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable: apply logic LOW for normal operation and logic HIGH to disable the receiver outputs into high-Z state.
2 C1+ passive Positive terminal of the voltage doubler charge-pump capacitor.
3 V+ power_out Regulated +5.5V output generated by the charge pump.
4 C1- passive Negative terminal of the voltage doubler charge-pump capacitor.
5 C2+ passive Positive terminal of the inverting charge-pump capacitor.
6 C2- passive Negative terminal of the inverting charge-pump capacitor.
7 V- power_out Regulated -5.5V output generated by the charge pump.
8 T2OUT output RS-232 driver output 2, with outputs protected against infinite short-circuits to ground.
9 R2IN input RS-232 receiver 2 input, with a typical 5kΩ internal pull-down to ground that holds the output HIGH when left unconnected.
10 R2OUT output TTL/CMOS receiver 2 output.
11 STATUS output TTL/CMOS output indicating the online and shutdown status, going LOW when the device is shut down.
12 T2IN input TTL/CMOS driver 2 input.
13 T1IN input TTL/CMOS driver 1 input.
14 ONLINE input Apply logic HIGH to override AUTO ON-LINE circuitry and keep drivers active, with SHUTDOWN also at logic HIGH.
15 R1OUT output TTL/CMOS receiver 1 output.
16 R1IN input RS-232 receiver 1 input.
17 T1OUT output RS-232 driver output 1, with outputs protected against infinite short-circuits to ground.
18 GND power_in Ground reference.
19 VCC power_in Supply voltage input, +3.0V to +5.5V.
20 SHUTDOWN input Apply logic LOW to shut down the drivers and charge pump, overriding all AUTO ON-LINE circuitry and ONLINE.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package TSSOP-20
Category Interface ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current, AUTO ON-LINE 1 10 µA All RxIN open, ONLINE = GND, SHUTDOWN = Vcc, TxIN = Vcc or GND, Vcc = +3.3V, TAMB = +25ºC 2
Supply Current, Shutdown 1 10 µA SHUTDOWN = GND, TxIN = Vcc or GND, Vcc = +3.3V, TAMB = +25ºC 2
Supply Current, AUTO ON-LINE Disabled 0.3 1 mA ONLINE = SHUTDOWN = Vcc, No Load, Vcc = +3.3V, TAMB = +25ºC 2
Input Logic Threshold LOW 0.8 V Vcc = 3.3V or 5.0V, TxIN, EN, SHUTDOWN, ONLINE 2
Input Logic Threshold HIGH 2 V Vcc = 3.3V or 5.0V, TxIN, EN, SHUTDOWN, ONLINE 2
Input Leakage Current -1 0.01 1 µA TxIN, EN, ONLINE, SHUTDOWN, TAMB = +25ºC, Vin = 0V to Vcc 2
Output Leakage Current -10 0.05 10 µA Receivers disabled, Vout = 0V to Vcc 2
Output Voltage LOW 0.4 V IOUT = 1.6mA 2
Output Voltage Swing 5 5.4 V All Driver outputs loaded with 3kΩ to GND, TAMB = +25ºC 3
Output Resistance 300 Ω Vcc = V+ = V- = 0V, Vout = +/-2V 3
Output Short-Circuit Current 35 60 mA Vout = 0V 3
Output Leakage Current (Driver Disabled) -25 25 µA Vcc = 0V or 3.0V to 5.5V, Vout = +/-12V, Driver disabled 3
Input Voltage Range -15 15 V 3
Input Threshold LOW (Vcc=3.3V) 0.6 1.2 V Vcc = 3.3V 3
Input Threshold LOW (Vcc=5.0V) 0.8 1.5 V Vcc = 5.0V 3
Input Threshold HIGH (Vcc=3.3V) 1.5 2.4 V Vcc = 3.3V 3
Input Threshold HIGH (Vcc=5.0V) 1.8 2.4 V Vcc = 5.0V 3
Input Hysteresis 0.3 V 3
Input Resistance 3 5 7 kΩ 3
STATUS Output Voltage LOW 0.4 V IOUT = 1.6mA 3
Receiver Threshold to Drivers Enabled tONLINE 200 µs Figure 15 3
Receiver Positive or Negative Threshold to STATUS HIGH tSTSH 0.5 µs Figure 15 3
Receiver Positive or Negative Threshold to STATUS LOW tSTSL 20 µs Figure 15 3
Maximum Data Rate (EB) 250 kbps RL = 3kΩ, CL = 1000pF, One Driver active 4
Receiver Output Enable Time 200 ns Normal Operation 4
Receiver Output Disable Time 200 ns Normal Operation 4
Driver Skew (E, EB) 100 500 ns │tPHL - tPLH│, TAMB = 25°C 4
Receiver Skew 200 1000 ns │tPHL - tPLH│ 4
Transition-Region Slew Rate (E, EB) 30 V/µs Vcc = 3.3V, RL = 3kΩ, TAMB = 25°C, measurements taken from -3.0V to +3.0V or +3.0V to -3.0V 4
VCC Supply Voltage (absolute max) VCC -0.3 6 V 2
V+ Supply Voltage (absolute max) V+ -0.3 7 V NOTE 1 2
V- Supply Voltage (absolute max) V- -7 0.3 V NOTE 1 2
V+ + /V-/ (absolute max) 13 V NOTE 1 2
ICC (DC VCC or GND current) ICC 100 mA 2
TxOUT Output Voltage (absolute max) TxOUT 13.2 V 2
RxIN Input Voltage (absolute max) RxIN 15 V 2
Storage Temperature -65 150 °C 2
Supply Voltage VCC (recommended) VCC 3 5.5 V TAMB = TMIN to TMAX 2
Operating Ambient Temperature (extended range) TAMB -40 85 °C Extended range part (EY-L TSSOP) per ordering information 19

CAD (KiCad official)

  • Symbol: SP3223EBEY-L
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: sp3223ebey-l-etched.step / sp3223ebey-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp3223ebey-l.step / sp3223ebey-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (20 pp, sha256 11de50910ae56dc8, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF