component
SP232EEN-HXY
Public Made by Adomby adom
HXY MOSFET RS232 ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSP232EEN-HXY
HXY MOSFET · RS232 ICs · SOP-16
SP232EEN-HXY from HXY MOSFET, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Terminal for the positive charge-pump C1 capacitor, connected between C1+ and C1- in the typical application circuit. |
| 2 | V+ | power_out | Positive voltage generated by the internal charge pump, with the absolute maximum rating for the transmitter high output voltage given as VCC-0.3 V. |
| 3 | C1- | passive | Terminal for the negative charge-pump C1 capacitor, connected between C1+ and C1- in the typical application circuit. |
| 4 | C2+ | passive | Terminal for the positive charge-pump C2 capacitor, connected between C2+ and C2- in the typical application circuit. |
| 5 | C2- | passive | Terminal for the negative charge-pump C2 capacitor, connected between C2+ and C2- in the typical application circuit. |
| 6 | V- | power_out | Negative voltage generated by the internal charge pump, with the absolute maximum rating for the transmitter low output voltage given as -14 V. |
| 7 | T2OUT | output | RS-232 driver output at RS-232 levels, with transmitter short-circuit output current specified as ±60 mA maximum. |
| 8 | R2IN | input | RS-232 receiver input at RS-232 levels, with receiver input voltage rated at -30 V to 30 V absolute maximum and -20 V to 20 V recommended. |
| 9 | R2OUT | output | RS-232 receiver output at TTL/CMOS levels, with receiver output voltage limited to -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | RS-232 driver input at TTL/CMOS levels, with transmitter input voltage rated from 0 V to VCC. |
| 11 | T1IN | input | RS-232 driver input at TTL/CMOS levels, with transmitter input voltage rated from 0 V to VCC. |
| 12 | R1OUT | output | RS-232 receiver output at TTL/CMOS levels, with receiver output voltage limited to -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | RS-232 receiver input at RS-232 levels, with receiver input voltage rated at -30 V to 30 V absolute maximum and -20 V to 20 V recommended. |
| 14 | T1OUT | output | RS-232 driver output at RS-232 levels, with transmitter short-circuit output current specified as ±60 mA maximum. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage input, with absolute maximum rating of 6.0 V and recommended maximum of 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.3 | 6 | V | 1 | ||
| Transmitter Low Output Voltage | V- | -0.3 | -14 | V | 1 | ||
| Transmitter Input Voltage | VTIN | -0.3 | V | 1 | |||
| Receiver Input Voltage | VRIN | -30 | 30 | V | 1 | ||
| Voltage Applied to Receiver Output | VROUT | -0.3 | V | 1 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 1 | ||
| Supply Voltage | VCC | 5.5 | V | 3 | |||
| Transmitter Input Voltage | VTIN | 0 | V | 3 | |||
| Receiver Input Voltage | VRIN | -20 | 20 | V | 3 | ||
| Output Current of Transmitter Short Circuit | ISC | -60 | 60 | mA | 3 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Supply Current | ICC | 10 | 14 | mA | VCC = 5.5V | 4 | |
| Hysteresis Voltage | Vh | 0.9 | 1 | V | VCC = 5.0V | 4 | |
| Input Resistance | RI | 3 | 7 | kΩ | VCC = 5.0V | 4 | |
| Output Low Voltage (receiver) | VOL | 0.3 | 0.4 | V | IL = 3.2mA, VCC = 4.5V, VOL = 2.4V | 4 | |
| Output High Voltage (receiver) | VOH | 3.5 | V | IOH = -1.0mA, VCC = 4.5V, VOH = 0.8V | 4 | ||
| Output High Voltage (transmitter) | VOH | 5 | V | VCC = 4.5V, VIL = 0.8V, RL = 3.0kΩ | 4 | ||
| Input Low Current | IIL | -1 | 10 | µA | VCC = 5.5V, VIL = 0V | 4 | |
| Input High Current | IIH | 1 | 10 | µA | VCC = 5.5V, VIH = VCC | 4 | |
| Output Resistance | RO | 300 | Ω | VCC = V+ = V- = 0V, VO = ±2V | 4 | ||
| Speed Of Information Transmission | ST | 120 | kbit/s | VCC = 4.5V, CL = 1000pF, RL = 3.0kΩ, tW = 7µs | 4 | ||
| Signal Propagation Delay Time When Switching On (Off), transmitter | tPHLT (tPLHT) | 5 | 6 | µs | VCC = 4.5V, CL = 2500pF, VIL = 0V, VIH = 3.0V, RL = 3kΩ | 4 |
CAD (KiCad official)
- Symbol:
SP232EEN-HXY - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
sp232een-hxy-etched.step/sp232een-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp232een-hxy.step/sp232een-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
630bacb42716fd73, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).