main
History Download
Ray Publish 0.1.0 6057f8e

SP211ECA-L

MaxLinear · RS232 ICs · SSOP-28

SP211ECA-L from MaxLinear, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 T3 OUT output RS-232 driver 3 output, ESD protected to ±15kV HBM and IEC61000-4-2 air, tri-stated in shutdown.
2 T1 OUT output RS-232 driver 1 output, ESD protected to ±15kV HBM and IEC61000-4-2 air, tri-stated in shutdown.
3 T2 OUT output RS-232 driver 2 output, ESD protected to ±15kV HBM and IEC61000-4-2 air, tri-stated in shutdown.
4 R2 IN input RS-232 receiver 2 input with 5kΩ pulldown, accepts ±25V, ESD protected to ±15kV.
5 R2 OUT tri_state TTL/CMOS receiver 2 output, tri-stated by EN high or SD high.
6 T2 IN input TTL/CMOS driver 2 input with internal pullup to VCC.
7 T1 IN input TTL/CMOS driver 1 input with internal pullup to VCC.
8 R1 OUT tri_state TTL/CMOS receiver 1 output, tri-stated by EN high or SD high.
9 R1 IN input RS-232 receiver 1 input with 5kΩ pulldown, accepts ±25V, ESD protected to ±15kV.
10 GND power_in Ground.
11 VCC power_in +5V supply input, 4.50V to 5.50V.
12 C1+ passive Charge pump capacitor C1 positive terminal, 0.1µF.
13 V+ power_out Charge pump positive output with 0.1µF storage capacitor, generated independently of VCC.
14 C1- passive Charge pump capacitor C1 negative terminal, 0.1µF.
15 C2+ passive Charge pump capacitor C2 positive terminal, 0.1µF.
16 C2- passive Charge pump capacitor C2 negative terminal, 0.1µF.
17 V- power_out Charge pump negative output with 0.1µF storage capacitor, generated independently of VCC.
18 R5 IN input RS-232 receiver 5 input with 5kΩ pulldown, accepts ±25V, ESD protected to ±15kV.
19 R5 OUT tri_state TTL/CMOS receiver 5 output, tri-stated by EN high or SD high.
20 T3 IN input TTL/CMOS driver 3 input with internal pullup to VCC.
21 T4 IN input TTL/CMOS driver 4 input with internal pullup to VCC.
22 R4 OUT tri_state TTL/CMOS receiver 4 output, tri-stated by EN high or SD high.
23 R4 IN input RS-232 receiver 4 input with 5kΩ pulldown, accepts ±25V, ESD protected to ±15kV.
24 EN input Active-low receiver enable; 0V enables receiver outputs and high tri-states them.
25 SD input Shutdown input, active high; drives supply current to 1µA typical, tri-states drivers and receivers.
26 R3 OUT tri_state TTL/CMOS receiver 3 output, tri-stated by EN high or SD high.
27 R3 IN input RS-232 receiver 3 input with 5kΩ pulldown, accepts ±25V, ESD protected to ±15kV.
28 T4 OUT output RS-232 driver 4 output, ESD protected to ±15kV HBM and IEC61000-4-2 air, tri-stated in shutdown.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SSOP-28
Category Communication Interface Chip
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic threshold VIL VIL 0.8 V TTL Inputs TIN, EN, SD 7
Logic threshold VIH VIH 2 V TTL Inputs TIN, EN, SD 7
Logic pull-up current 15 200 µA TIN = 0V 7
Maximum transmission rate 120 kbps CL = 1000pF, RL = 3kΩ 7
TTL output VOL VOL 0.4 V IOUT = 3.2mA, VCC = 5V 7
TTL output VOH VOH 3.5 V IOUT = -1.0mA 7
TTL output leakage current 0.05 10 µA 0V ≤ VOUT ≤ VCC; SP211E EN = 0V; TA = +25ºC (printed ±10) 7
RS-232 output voltage swing, SP211E 5 8.7 V All transmitter outputs loaded with 3kΩ to ground (printed ±5, ±8.7) 7
Output resistance 300 Ω VCC = 0V, VOUT = ±2V 7
Output short circuit current 25 mA Infinite Duration, VOUT = 0V (printed ±25) 7
RS-232 input voltage range, SP211E -25 25 V TA = 25°C 7
RS-232 input voltage threshold low 0.8 1.2 V VCC = 5V, TA = 25°C 7
RS-232 input voltage threshold high 1.7 2.8 V VCC = 5V, TA = 25°C 7
RS-232 input hysteresis 0.2 0.5 1 V VCC = 5V 7
RS-232 input resistance 3 5 7 kΩ VIN = ±15V, TA = 25°C 7
Driver propagation delay 1.5 µs TTL to RS-232 7
Receiver propagation delay 0.5 1.5 µs RS-232 to TTL 7
Instantaneous slew rate 30 V/µs CL = 50pF, RL = 3 - 7kΩ, TA = 25°C, from ±3V 7
Transition time 1.5 µs CL = 2500pF, RL = 3kΩ, measured from -3V to +3V or +3V to -3V 7
Output enable time 400 ns 7
Output disable time 250 ns 7
Supply voltage VCC 4.5 5 5.5 V 8
Supply current, no load, SP211E ICC 3 8 mA No load: VCC = ±10%, TA = 25°C 8
Supply current, all transmitters loaded, SP211E ICC 23 mA All transmitters RL = 3kΩ 8
Shutdown current 1 10 µA TA = 25°C 8
Operating temperature, Commercial 0 70 ºC Commercial, _C 8
Storage temperature -65 150 ºC 8
Supply voltage VCC VCC 6 V 6
V+ supply V+ -0.3 13.2 V min printed VCC - 0.3 6
V- supply V- 13.2 V 6
Input voltage TIN TIN -0.3 0.3 V max printed VCC +0.3 6
Input voltage RIN, SP211E RIN -25 25 V printed ±25 6
Output voltage ROUT ROUT -0.3 0.3 V max printed VCC + 0.3 6
Power dissipation, 28-pin SSOP 900 mW derate 11.2mW / oC above +70oC 6
ESD HBM, driver outputs and receiver inputs -15 15 kV Human Body Model (printed ±15) 6
ESD IEC61000-4-2 Air Discharge -15 15 kV Driver Outputs and Receiver Inputs (printed ±15) 6
ESD IEC61000-4-2 Contact Discharge -8 8 kV Driver Outputs and Receiver Inputs (printed ±8) 6

CAD (KiCad official)

  • Symbol: SP211ECA-L
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: sp211eca-l-etched.step / sp211eca-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp211eca-l.step / sp211eca-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (26 pp, sha256 022d7a1a489cbcc9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF