main
Ray
Publish 0.1.0
0d86255
SP208EEA-L
MaxLinear · RS232 ICs · SSOP-24
SP208EEA-L from MaxLinear, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T2 OUT | output | RS-232 driver 2 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
| 2 | T1 OUT | output | RS-232 driver 1 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
| 3 | R2 IN | input | RS-232 receiver 2 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 4 | R2 OUT | output | TTL/CMOS receiver 2 output, VOL 0.4V max at 3.2mA. |
| 5 | T1 IN | input | TTL/CMOS driver 1 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 6 | R1 OUT | output | TTL/CMOS receiver 1 output, VOL 0.4V max at 3.2mA. |
| 7 | R1 IN | input | RS-232 receiver 1 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 8 | GND | power_in | Ground. |
| 9 | VCC | power_in | +5V supply input, 4.50V to 5.50V operating, 6.0V absolute maximum. |
| 10 | C1+ | passive | Charge pump capacitor C1 positive terminal, 0.1µF (6.3V) connected to C1-. |
| 11 | V+ | power_out | Charge pump positive output (about +7V), 13.2V absolute maximum, with a 0.1µF storage capacitor. |
| 12 | C1- | passive | Charge pump capacitor C1 negative terminal, 0.1µF (6.3V) connected to C1+. |
| 13 | C2+ | passive | Charge pump capacitor C2 positive terminal, 0.1µF (16V) connected to C2-. |
| 14 | C2- | passive | Charge pump capacitor C2 negative terminal, 0.1µF (16V) connected to C2+. |
| 15 | V- | power_out | Charge pump negative output (about -7V), 13.2V absolute maximum magnitude, with a 0.1µF (16V) storage capacitor. |
| 16 | R4 IN | input | RS-232 receiver 4 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 17 | R4 OUT | output | TTL/CMOS receiver 4 output, VOL 0.4V max at 3.2mA. |
| 18 | T2 IN | input | TTL/CMOS driver 2 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 19 | T3 IN | input | TTL/CMOS driver 3 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 20 | T4 OUT | output | RS-232 driver 4 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
| 21 | T4 IN | input | TTL/CMOS driver 4 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 22 | R3 OUT | output | TTL/CMOS receiver 3 output, VOL 0.4V max at 3.2mA. |
| 23 | R3 IN | input | RS-232 receiver 3 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 24 | T3 OUT | output | RS-232 driver 3 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SSOP-24 |
| Category | Communication Interface Chip |
| Pins | 24 |
CAD (KiCad official)
- Symbol:
SP208EEA-L - Footprint:
Package_SO:SSOP-24_5.3x8.2mm_P0.65mm - 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files:
sp208eea-l-etched.step/sp208eea-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp208eea-l.step/sp208eea-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (26 pp, sha256
022d7a1a489cbcc9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SP208EEA-L
**MaxLinear** · RS232 ICs · SSOP-24
SP208EEA-L from MaxLinear, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T2 OUT | output | RS-232 driver 2 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
| 2 | T1 OUT | output | RS-232 driver 1 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
| 3 | R2 IN | input | RS-232 receiver 2 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 4 | R2 OUT | output | TTL/CMOS receiver 2 output, VOL 0.4V max at 3.2mA. |
| 5 | T1 IN | input | TTL/CMOS driver 1 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 6 | R1 OUT | output | TTL/CMOS receiver 1 output, VOL 0.4V max at 3.2mA. |
| 7 | R1 IN | input | RS-232 receiver 1 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 8 | GND | power_in | Ground. |
| 9 | VCC | power_in | +5V supply input, 4.50V to 5.50V operating, 6.0V absolute maximum. |
| 10 | C1+ | passive | Charge pump capacitor C1 positive terminal, 0.1µF (6.3V) connected to C1-. |
| 11 | V+ | power_out | Charge pump positive output (about +7V), 13.2V absolute maximum, with a 0.1µF storage capacitor. |
| 12 | C1- | passive | Charge pump capacitor C1 negative terminal, 0.1µF (6.3V) connected to C1+. |
| 13 | C2+ | passive | Charge pump capacitor C2 positive terminal, 0.1µF (16V) connected to C2-. |
| 14 | C2- | passive | Charge pump capacitor C2 negative terminal, 0.1µF (16V) connected to C2+. |
| 15 | V- | power_out | Charge pump negative output (about -7V), 13.2V absolute maximum magnitude, with a 0.1µF (16V) storage capacitor. |
| 16 | R4 IN | input | RS-232 receiver 4 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 17 | R4 OUT | output | TTL/CMOS receiver 4 output, VOL 0.4V max at 3.2mA. |
| 18 | T2 IN | input | TTL/CMOS driver 2 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 19 | T3 IN | input | TTL/CMOS driver 3 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 20 | T4 OUT | output | RS-232 driver 4 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
| 21 | T4 IN | input | TTL/CMOS driver 4 input, VIL 0.8V max, VIH 2.0V min, internal pullup to VCC if left open. |
| 22 | R3 OUT | output | TTL/CMOS receiver 3 output, VOL 0.4V max at 3.2mA. |
| 23 | R3 IN | input | RS-232 receiver 3 input with 5kΩ pulldown, ±15V input range, ESD protected to ±15kV HBM. |
| 24 | T3 OUT | output | RS-232 driver 3 output, swings at least ±5V with a 3kΩ load, short-circuit protected, ESD protected to ±15kV HBM. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SSOP-24 |
| Category | Communication Interface Chip |
| Pins | 24 |
## CAD (KiCad official)
- Symbol: `SP208EEA-L`
- Footprint: `Package_SO:SSOP-24_5.3x8.2mm_P0.65mm`
- 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files: `sp208eea-l-etched.step` / `sp208eea-l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sp208eea-l.step` / `sp208eea-l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MaxLinear datasheet](docs/sp208eea-l-datasheet.pdf) (26 pp, sha256 `022d7a1a489cbcc9`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sp208eea-l-datasheet.pdf)