main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn8p2604asg: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sn8p2604asg-etched.glb Publish 0.1.0 · Ray
sn8p2604asg-etched.step sn8p2604asg: factory component page (tier=lcsc) · Ray
sn8p2604asg-hero.glb sn8p2604asg: hero GLB from the etched model (keeps the MPN mark) · Ray
sn8p2604asg-hero.overlay.json Publish 0.1.0 · Ray
sn8p2604asg.glb Publish 0.1.0 · Ray
sn8p2604asg.kicad_mod Publish 0.1.0 · Ray
sn8p2604asg.kicad_sym Publish 0.1.0 · Ray
sn8p2604asg.lbr Publish 0.1.0 · Ray
sn8p2604asg.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 28 pins · Ray

SN8P2604ASG

SONIX · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-28-300mil

SN8P2604ASG from SONIX, in a SOP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0.1/INT1 bidirectional Port 0.1 bi-directional pin with Schmitt trigger input and built-in pull-up resistor, also the INT1 external interrupt trigger pin (falling edge only) and TC1 event counter clock input.
2 VDD power_in Power supply input pin for the digital circuit.
3 P5.4 bidirectional Port 5.4 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
4 VSS power_in Ground pin for the digital circuit power supply.
5 P0.0/INT0 bidirectional Port 0.0 bi-directional pin with Schmitt trigger input and built-in pull-up resistor, also the INT0 trigger pin (edge controlled by PEDGE register).
6 P5.0 bidirectional Port 5.0 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
7 P5.1 bidirectional Port 5.1 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
8 P5.2 bidirectional Port 5.2 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
9 P5.3/BZ1/PWM1 bidirectional Port 5.3 bi-directional pin with Schmitt trigger input and built-in pull-up resistor; alternately outputs the TC1 ÷ 2 signal for buzzer or the PWM1 output.
10 P1.0 bidirectional Port 1.0 bi-directional and open-drain pin with Schmitt trigger input and built-in pull-up resistor.
11 P1.1 bidirectional Port 1.1 bi-directional and open-drain pin with Schmitt trigger input and built-in pull-up resistor.
12 P1.2 bidirectional Port 1.2 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
13 P1.3 bidirectional Port 1.3 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
14 P1.4 bidirectional Port 1.4 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
15 P1.5 bidirectional Port 1.5 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
16 P1.6 bidirectional Port 1.6 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
17 P1.7 bidirectional Port 1.7 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
18 P2.0 bidirectional Port 2.0 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
19 P2.1 bidirectional Port 2.1 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
20 P2.2 bidirectional Port 2.2 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
21 P2.3 bidirectional Port 2.3 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
22 P2.4 bidirectional Port 2.4 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
23 P2.5 bidirectional Port 2.5 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
24 P2.6 bidirectional Port 2.6 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
25 P2.7 bidirectional Port 2.7 bi-directional pin with Schmitt trigger input and built-in pull-up resistor.
26 XOUT/Fcpu bidirectional XOUT is the oscillator output pin when an external crystal is enabled; Fcpu is the signal output pin when external RC mode is enabled.
27 XIN input Oscillator input pin used when an external oscillator (crystal or RC) is enabled.
28 RST/VPP/P0.2 input RST is the active-low system reset input with Schmitt trigger; P0.2 is an input-only pin without pull-up resistor (add a 100 ohm external resistor when used as input); VPP is the OTP programming pin.

Key specifications

Parameter Value
Manufacturer SONIX
Package SOP-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vdd -0.3 6 V 91
Operating voltage Vdd 2.4 5 5.5 V Normal mode, Vpp = Vdd, 25C 91
Operating voltage Vdd 2.5 5 5.5 V Normal mode, Vpp = Vdd, -40C~85C 91
RAM Data Retention voltage Vdr 1.5 V 91
Vdd rise rate Vpor 0.05 V/ms Vdd rise rate to ensure power-on reset 91
Reset pin leakage current Ilekg 2 uA Vin = Vdd 91
I/O port pull-up resistor Rup 100 200 300 K Vin = Vss , Vdd = 3V 91
I/O port pull-up resistor Rup 50 100 180 K Vin = Vss , Vdd = 5V 91
I/O port input leakage current Ilekg 2 uA Pull-up resistor disable, Vin = Vdd 91
I/O output source current IoH 8 12 mA Vop = Vdd, 0.5V 91
I/O output sink current IoL 8 15 mA Vop = Vss + 0.5V 91
Supply current Run Mode Idd1 2.5 5 mA Vdd= 5V, 4Mhz; No loading, Fcpu = Fosc/4 91
Supply current Run Mode Idd1 1 2 mA Vdd= 3V, 4Mhz; No loading, Fcpu = Fosc/4 91
Supply current Slow Mode Idd2 25 50 uA Vdd= 5V, 32Khz; Internal low RC, Stop high clock 91
Supply current Slow Mode Idd2 5 10 uA Vdd= 3V, 16Khz; Internal low RC, Stop high clock 91
Supply current Sleep Mode Idd3 1 2 uA Vdd= 5V, 25C 91
Supply current Sleep Mode Idd3 0.7 1.5 uA Vdd= 3V, 25C 91
Supply current Sleep Mode Idd3 10 21 uA Vdd= 5V, -40C~85C 91
Supply current Green Mode Idd4 0.6 1.2 mA Vdd= 5V, 4Mhz; No loading, Fcpu = Fosc/4 91
Supply current Green Mode Idd4 0.25 0.5 mA Vdd= 3V, 4Mhz; No loading, Fcpu = Fosc/4 91
Supply current Green Mode Idd4 15 30 uA Vdd=5V, ILRC 32Khz 91
Supply current Green Mode Idd4 3 6 uA Vdd=3V, ILRC 16Khz 91
LVD low voltage reset level Vdet0 1.6 2 2.3 V Low voltage reset level. 91
LVD low voltage indicator level Vdet2 2.7 3.3 4.5 V Low voltage indicator level. Fcpu = 1 MHz 91
Operating ambient temperature Topr -20 85 C SN8P2604AK, SN8P2604AS, SN8P2604AX 91
Operating ambient temperature Topr -40 85 C SN8P2604AKD, SN8P2604ASD, SN8P2604AXD 91
Storage ambient temperature Tstor -40 125 C 91

CAD (KiCad official)

  • Symbol: SN8P2604ASG
  • Footprint: Package_SO:SOP-28_8.4x18.16mm_P1.27mm
  • 3D model: SOP-28-300mil (KiCad packages3D, STEP)
  • 3D model files: sn8p2604asg-etched.step / sn8p2604asg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn8p2604asg.step / sn8p2604asg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SONIX datasheet (102 pp, sha256 5a8255cf0bcc4994, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF