← Commit history
Publish 0.1.1
7 files changed
+222−211
README.md+70−61@@ -8,34 +8,34 @@ SN8F5814SG from SONIX, in a SOIC-28-300mil. Pinout and pin descriptions extracte | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VSS | power_in | Ground (0 V). |-| 2 | P0.0/XIN/SCL/T2COM0/INT1 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with external clock input XIN, I2C SCL, Timer 2 compare 0 output and external interrupt 1. |-| 3 | P0.1/XOUT/SDA/T2COM1 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with crystal/resonator drive XOUT, I2C SDA and Timer 2 compare 1 output. |-| 4 | P0.2/LXIN/T2CC2/PWM10 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with low clock external input LXIN, Timer 2 capture 2 input and PWM10 output. |-| 5 | P0.3/LXOUT/T2CC3/PWM20 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with low clock crystal drive LXOUT, Timer 2 capture 3 input and PWM20 output. |-| 6 | P0.4/RST/INT2 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with active-low system reset and external interrupt 2. |-| 7 | P0.5/T2CC0/COM0 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 capture 0 input and LCD common 0 output. |-| 8 | P0.6/T2CC1/COM1 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 capture 1 input and LCD common 1 output. |-| 9 | P0.7/T2COM2/COM2 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 compare 2 output and LCD common 2 output. |-| 10 | P1.0/T2COM3/COM3 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 compare 3 output and LCD common 3 output. |-| 11 | P1.1/SEG0/CM15 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 0 output and cap-sensing input channel 15. |-| 12 | P1.2/SEG1/CM14 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 1 output and cap-sensing input channel 14. |-| 13 | P1.3/SEG2/CM13 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 2 output and cap-sensing input channel 13. |-| 14 | P1.4/SEG3/CM12 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 3 output and cap-sensing input channel 12. |-| 15 | P15/CM11/AIN12/SEG4 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 4 output, ADC input channel 12 and cap-sensing input channel 11. |-| 16 | P16/CM10/AIN11/SEG5 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 5 output, ADC input channel 11 and cap-sensing input channel 10. |-| 17 | P17/CM9/AIN10/SEG6 | bidirectional | GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 6 output, ADC input channel 10 and cap-sensing input channel 9. |-| 18 | P27/CM8/AIN9/SEG7/URX | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with UART reception pin, LCD segment 7 output, ADC input channel 9 and cap-sensing input channel 8. |-| 19 | P26/CM7/AIN8/SEG8/UTX | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with UART transmission pin, LCD segment 8 output, ADC input channel 8 and cap-sensing input channel 7. |-| 20 | P25/CM6/AIN7/SEG9/SSN | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with SPI slave select (slave mode), LCD segment 9 output, ADC input channel 7 and cap-sensing input channel 6. |-| 21 | P24/CM5/AIN6/SEG10/SCK | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with SPI clock (output in master, input in slave), LCD segment 10 output, ADC input channel 6 and cap-sensing input channel 5. |-| 22 | P23/CM4/AIN5/SEG11/MISO | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with SPI MISO (reception in master, transmission in slave), LCD segment 11 output, ADC input channel 5 and cap-sensing input channel 4. |-| 23 | P22/CM3/AIN4/SEG12/MOSI | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with SPI MOSI (transmission in master, reception in slave), LCD segment 12 output, ADC input channel 4 and cap-sensing input channel 3. |-| 24 | P21/CM2/AIN3/SEG13/PWM21 | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with PWM21 output, LCD segment 13 output, ADC input channel 3 and cap-sensing input channel 2. |-| 25 | P20/CM1/AIN2/SEG14/PWM11 | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with PWM11 output, LCD segment 14 output, ADC input channel 2 and cap-sensing input channel 1. |-| 26 | P31/AIN1/SWAT | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with debug interface SWAT and ADC input channel 1. |-| 27 | P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL | bidirectional | GPIO with Schmitt-trigger input and pull-up; shared with external interrupt 0, PWM fail detect, LCD segment 15 output, ADC input channel 0, ADC external reference voltage (AVREFH) and cap-sensing input channel 0. |-| 28 | VDD | power_in | Power supply. |+| 1 | VSS | power_in | Ground reference pin (0 V) for the device. |+| 2 | SCL/T2COM0/INT1/XIN/P00 | bidirectional | P0.0 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as XIN external system clock input, I2C SCL clock, Timer 2 compare 0 output (T2COM0) and external interrupt INT1. |+| 3 | SDA/T2COM1/XOUT/P01 | bidirectional | P0.1 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as XOUT crystal/resonator drive, I2C SDA data pin and Timer 2 compare 1 output (T2COM1). |+| 4 | PWM10/T2CC2/LXIN/P02 | bidirectional | P0.2 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LXIN low-clock external input, Timer 2 capture 2 input (T2CC2) and PWM10 programmable PWM output. |+| 5 | PWM20/T2CC3/LXOUT/P03 | bidirectional | P0.3 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LXOUT low-clock crystal drive, Timer 2 capture 3 input (T2CC3) and PWM20 programmable PWM output. |+| 6 | INT2/RST/P04 | bidirectional | P0.4 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as the active-low system reset input (RST) and external interrupt INT2. |+| 7 | T2CC0/COM0/P05 | bidirectional | P0.5 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 capture 0 input (T2CC0) and LCD common 0 output (COM0). |+| 8 | T2CC1/COM1/P06 | bidirectional | P0.6 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 capture 1 input (T2CC1) and LCD common 1 output (COM1). |+| 9 | T2COM2/COM2/P07 | bidirectional | P0.7 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 compare 2 output (T2COM2) and LCD common 2 output (COM2). |+| 10 | T2COM3/COM3/P10 | bidirectional | P1.0 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 compare 3 output (T2COM3) and LCD common 3 output (COM3). |+| 11 | SEG0/CM15/P11 | bidirectional | P1.1 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 0 output (SEG0) and cap-sensing input channel 15 (CM15). |+| 12 | SEG1/CM14/P12 | bidirectional | P1.2 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 1 output (SEG1) and cap-sensing input channel 14 (CM14). |+| 13 | SEG2/CM13/P13 | bidirectional | P1.3 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 2 output (SEG2) and cap-sensing input channel 13 (CM13). |+| 14 | SEG3/CM12/P14 | bidirectional | P1.4 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 3 output (SEG3) and cap-sensing input channel 12 (CM12). |+| 15 | P15/CM11/AIN12/SEG4 | bidirectional | P1.5 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 4 output (SEG4), ADC input channel 12 (AIN12) and cap-sensing input channel 11 (CM11). |+| 16 | P16/CM10/AIN11/SEG5 | bidirectional | P1.6 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 5 output (SEG5), ADC input channel 11 (AIN11) and cap-sensing input channel 10 (CM10). |+| 17 | P17/CM9/AIN10/SEG6 | bidirectional | P1.7 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 6 output (SEG6), ADC input channel 10 (AIN10) and cap-sensing input channel 9 (CM9). |+| 18 | P27/CM8/AIN9/SEG7/URX | bidirectional | P2.7 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as UART receive pin (URX), LCD segment 7 output (SEG7), ADC input channel 9 (AIN9) and cap-sensing input channel 8 (CM8). |+| 19 | P26/CM7/AIN8/SEG8/UTX | bidirectional | P2.6 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as UART transmit pin (UTX), LCD segment 8 output (SEG8), ADC input channel 8 (AIN8) and cap-sensing input channel 7 (CM7). |+| 20 | P25/CM6/AIN7/SEG9/SSN | bidirectional | P2.5 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI slave select pin (SSN, slave mode), LCD segment 9 output (SEG9), ADC input channel 7 (AIN7) and cap-sensing input channel 6 (CM6). |+| 21 | P24/CM5/AIN6/SEG10/SCK | bidirectional | P2.4 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI clock pin (SCK), LCD segment 10 output (SEG10), ADC input channel 6 (AIN6) and cap-sensing input channel 5 (CM5). |+| 22 | P23/CM4/AIN5/SEG11/MISO | bidirectional | P2.3 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI MISO pin, LCD segment 11 output (SEG11), ADC input channel 5 (AIN5) and cap-sensing input channel 4 (CM4). |+| 23 | P22/CM3/AIN4/SEG12/MOSI | bidirectional | P2.2 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI MOSI pin, LCD segment 12 output (SEG12), ADC input channel 4 (AIN4) and cap-sensing input channel 3 (CM3). |+| 24 | P21/CM2/AIN3/SEG13/PWM21 | bidirectional | P2.1 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as PWM21 programmable PWM output, LCD segment 13 output (SEG13), ADC input channel 3 (AIN3) and cap-sensing input channel 2 (CM2). |+| 25 | P20/CM1/AIN2/SEG14/PWM11 | bidirectional | P2.0 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as PWM11 programmable PWM output, LCD segment 14 output (SEG14), ADC input channel 2 (AIN2) and cap-sensing input channel 1 (CM1). |+| 26 | P31/AIN1/SWAT | bidirectional | P3.1 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as the SWAT debug interface pin and ADC input channel 1 (AIN1). |+| 27 | P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL | bidirectional | P3.0 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as external interrupt INT0, PWM fail detect pin (PWMFL), LCD segment 15 output (SEG15), ADC input channel 0 (AIN0), external ADC high reference voltage input (AVREFH) and cap-sensing input channel 0 (CM0). |+| 28 | VDD | power_in | Power supply pin for the device. | ## Key specifications @@ -52,54 +52,63 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage VDD to VSS | | -0.3 | | 6 | V | | 151 |-| Voltage at any pin to VSS | | -0.3 | | | V | upper limit VDD+0.3V | 151 |-| Operating ambient temperature | | -40 | | 85 | °C | | 151 |-| Storage ambient temperature | | -40 | | 125 | °C | | 151 |-| Junction temperature | | -40 | | 125 | °C | | 151 |-| Operating voltage | VDD | 1.8 | | 5.5 | V | fcpu = 1MHz | 151 |+| VDD Operating voltage | VDD | 1.8 | | 5.5 | V | fcpu = 1MHz | 151 | | RAM data retention voltage | VDR | 1.5 | | | V | | 151 |-| VDD rising rate | VPOR | 0.05 | | | V/ms | non-verified design reference | 151 |-| STOP mode supply current | IDD2 | | 4 | 8.5 | μA | VDD = 3V | 151 |-| STOP mode supply current | IDD2 | | 4.9 | 9 | μA | VDD = 5V | 151 |+| VDD rising rate | VPOR | 0.05 | | | V/ms | | 151 |+| Normal mode supply current (32MHz IHRC) | IDD1 | | | 2.77 | mA | CKCON = 0x00; VDD = 3V, fcpu = 1MHz | 151 |+| Normal mode supply current (32MHz IHRC) | IDD1 | | | 2.78 | mA | CKCON = 0x00; VDD = 5V, fcpu = 1MHz | 151 |+| Normal mode supply current (32MHz IHRC) | IDD1 | | | 3.24 | mA | CKCON = 0x00; VDD = 3V, fcpu = 4MHz | 151 |+| Normal mode supply current (32MHz IHRC) | IDD1 | | | 3.26 | mA | CKCON = 0x00; VDD = 5V, fcpu = 4MHz | 151 |+| Normal mode supply current (32MHz IHRC) | IDD1 | | | 3.87 | mA | CKCON = 0x00; VDD = 3V, fcpu = 8MHz | 151 |+| Normal mode supply current (32MHz IHRC) | IDD1 | | | 3.89 | mA | CKCON = 0x00; VDD = 5V, fcpu = 8MHz | 151 |+| Normal mode supply current (16MHz Crystal) | IDD1 | | | 2.52 | mA | CKCON = 0x00; VDD = 3V, fcpu = 1MHz | 151 |+| Normal mode supply current (16MHz Crystal) | IDD1 | | | 3.18 | mA | CKCON = 0x00; VDD = 5V, fcpu = 1MHz | 151 |+| Normal mode supply current (16MHz Crystal) | IDD1 | | | 3.06 | mA | CKCON = 0x00; VDD = 3V, fcpu = 4MHz | 151 |+| Normal mode supply current (16MHz Crystal) | IDD1 | | | 3.72 | mA | CKCON = 0x00; VDD = 5V, fcpu = 4MHz | 151 |+| Normal mode supply current (16MHz Crystal) | IDD1 | | | 3.7 | mA | CKCON = 0x00; VDD = 3V, fcpu = 8MHz | 151 |+| Normal mode supply current (16MHz Crystal) | IDD1 | | | 4.29 | mA | CKCON = 0x00; VDD = 5V, fcpu = 8MHz | 151 |+| Normal mode supply current (4MHz Crystal) | IDD1 | | | 2.04 | mA | CKCON = 0x00; VDD = 3V, fcpu = 1MHz | 151 |+| Normal mode supply current (4MHz Crystal) | IDD1 | | | 2.24 | mA | CKCON = 0x00; VDD = 5V, fcpu = 1MHz | 151 |+| Normal mode supply current (4MHz Crystal) | IDD1 | | | 2.58 | mA | CKCON = 0x00; VDD = 3V, fcpu = 4MHz | 151 |+| Normal mode supply current (4MHz Crystal) | IDD1 | | | 2.78 | mA | CKCON = 0x00; VDD = 5V, fcpu = 4MHz | 151 |+| STOP mode supply current | IDD2 | 4 | | 8.5 | μA | VDD = 3V | 151 |+| STOP mode supply current | IDD2 | 4.9 | | 9 | μA | VDD = 5V | 151 | | Internal high clock generator frequency | FIHRC | 31.84 | 32 | 32.16 | MHz | VDD = 1.8V to 5.5V, 25°C | 152 | | Internal high clock generator frequency | FIHRC | 31.68 | | 31.99 | MHz | VDD = 1.8V to 5.5V, 25°C to 85°C | 152 | | Internal high clock generator frequency | FIHRC | 32.31 | | 32.64 | MHz | VDD = 1.8V to 5.5V, -40°C to 25°C | 152 | | Internal low clock generator frequency | FILRC | 12 | 16 | 24 | kHz | VDD = 5.0V, 25°C | 152 | | LVD18 detect voltage | VLVD18 | 1.7 | 1.8 | 1.9 | V | 25°C | 152 | | LVD18 detect voltage | VLVD18 | 1.6 | 1.8 | 2 | V | -40°C to 85°C | 152 |-| Low-level input voltage | VIL | | | 0.3 | VDD | min printed as VSS | 152 |-| High-level input voltage | VIH | 0.7 | | | VDD | max printed as VDD | 152 | | I/O port input leakage current | ILEKG | | | 2 | μA | VIN = VDD | 152 | | Pull-up resistor | RUP | 100 | 200 | 300 | kΩ | VDD = 3V | 152 | | Pull-up resistor | RUP | 50 | 100 | 150 | kΩ | VDD = 5V | 152 |-| I/O output source current | IOH | 12 | 19 | | mA | VDD = 5V, VO = VDD-0.5V | 152 |-| I/O sink current (P00-P04, P11-P17, P2, P3) | IOL1 | 15 | 22 | | mA | VDD = 5V, VO = VSS+0.5V | 153 |-| I/O sink current (P05-P07, P10) | IOL2 | 200 | | | mA | VDD = 5V, VO = VSS+1.5V | 153 |+| I/O output source current | IOH | 12 | | 19 | mA | VDD = 5V, VO = VDD-0.5V | 152 |+| I/O sink current (P00, P04, P11, P17, P2, P3) | IOL1 | 15 | | 22 | mA | VDD = 5V, VO = VSS+0.5V | 153 |+| I/O sink current (P05, P07, P10) | IOL2 | | | 200 | mA | VDD = 5V, VO = VSS+1.5V | 153 | | ADC operating voltage | VADC | 2 | | 5.5 | V | | 153 |-| AIN channels input voltage | VAIN | 0 | | | V | VDD = 5V; upper limit VREFH | 153 |-| AVREFH pin input voltage | VREFH | 2 | | | V | VDD = 5V; upper limit VDD | 153 |+| AIN channels input voltage | VAIN | 0 | | | V | VDD = 5V | 153 |+| AVREFH pin input voltage | VREFH | 2 | | | V | VDD = 5V | 153 | | Internal 4V reference voltage | VIREF | 3.92 | 4 | 4.08 | V | VDD = 5V | 153 | | Internal 3V reference voltage | VIREF | 2.94 | 3 | 3.06 | V | VDD = 5V | 153 | | Internal 2V reference voltage | VIREF | 1.96 | 2 | 2.04 | V | VDD = 5V | 153 |-| ADC clock | fADCLK | | | 32 | MHz | VDD = 5V | 153 |-| ADC sampling rate | fADSMP | | | 500 | kHz | VDD = 5V | 153 |-| Differential nonlinearity | DNL | -1 | | 1 | LSB | fADSMP = 62.5kHz | 153 |-| Differential nonlinearity | DNL | -3 | | 3 | LSB | fADSMP = 500kHz | 153 |-| Integral nonlinearity | INL | -2 | | 2 | LSB | fADSMP = 62.5kHz | 153 |-| Integral nonlinearity | INL | -4 | | 4 | LSB | fADSMP = 500kHz | 153 |-| No missing code | NMC | 10 | 11 | 12 | Bit | fADSMP = 62.5kHz | 153 |-| No missing code | NMC | 10 | | | Bit | fADSMP = 250kHz | 153 |-| No missing code | NMC | 9 | | | Bit | fADSMP = 500kHz | 153 |+| ADC current consumption | IAD | | | 0.69 | mA | VDD = 3V | 153 |+| ADC current consumption | IAD | | | 0.79 | mA | VDD = 5V | 153 |+| ADC clock | f ADCLK | | | 32 | MHz | VDD = 5V | 153 |+| ADC sampling rate | f ADSMP | | | 500 | kHz | VDD = 5V | 153 |+| ADC function enable period | t ADEN | | | 100 | μs | VDD = 5V | 153 |+| Differential nonlinearity | DNL | -1 | | 1 | LSB | f ADSMP = 62.5kHz | 153 |+| Differential nonlinearity | DNL | -3 | | 3 | LSB | f ADSMP = 500kHz | 153 |+| Integral nonlinearity | INL | -2 | | 2 | LSB | f ADSMP = 62.5kHz | 153 |+| Integral nonlinearity | INL | -4 | | 4 | LSB | f ADSMP = 500kHz | 153 | | Input offset voltage | VOFFSET | -10 | 0 | 10 | mV | Non-trimmed | 153 | | Flash supply voltage | Vdd | 1.8 | | 5.5 | V | | 154 |-| Flash write current | Iwrt | | 3 | 4 | mA | 25°C | 154 |-| Flash write time | Twrt | | 6 | 8 | ms | Write 1 page=32 bytes, 25°C | 154 |-| Normal mode supply current, 32MHz IHRC | IDD1 | | 2.77 | | mA | CKCON = 0x00, VDD = 3V, fcpu = 1MHz | 151 |-| Normal mode supply current, 32MHz IHRC | IDD1 | | 3.89 | | mA | CKCON = 0x00, VDD = 5V, fcpu = 8MHz | 151 |-| STOP mode supply current, LCD enable, no panel | IDD3 | | 108 | | μA | VDD = 3V, 32KHz Crystal | 151 |-| IDLE mode supply current | IDD4 | | 1.02 | | mA | fcpu = 1MHz, VDD = 3V, 32MHz IHRC | 152 |-| ADC current consumption | IAD | | 0.79 | | mA | VDD = 5V | 153 |+| Flash write current | Iwrt | 3 | | 4 | mA | 25°C | 154 |+| Flash write time | Twrt | 6 | | 8 | ms | Write 1 page=32 bytes, 25°C | 154 |+| Voltage applied at VDD to VSS | | -0.3 | | 6 | V | | 151 |+| Voltage applied at any pin to VSS | | -0.3 | | | V | | 151 |+| Operating ambient temperature | | -40 | | 85 | °C | | 151 |+| Storage ambient temperature | | -40 | | 125 | °C | | 151 |+| Junction temperature | | -40 | | 125 | °C | | 151 | ## Materials and finish @@ -121,7 +130,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [SONIX datasheet](docs/sn8f5814sg-datasheet.pdf) (177 pp, sha256 `6061f8b1c1fff302`, retrieved 2026-11-12, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/sn8f5814sg-datasheet.pdf)
package.json+48−48@@ -1,6 +1,6 @@ { "slug": "sn8f5814sg",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "SONIX Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -52,7 +52,7 @@ "lcsc": "C2981273" }, "distributor_check": {- "checked_at": "2026-11-12T04:57:52Z",+ "checked_at": "2026-11-12T07:59:10Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -68,169 +68,169 @@ "number": "1", "name": "VSS", "type": "power_in",- "description": "Ground (0 V)."+ "description": "Ground reference pin (0 V) for the device." }, { "number": "2",- "name": "P0.0/XIN/SCL/T2COM0/INT1",+ "name": "SCL/T2COM0/INT1/XIN/P00", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with external clock input XIN, I2C SCL, Timer 2 compare 0 output and external interrupt 1."+ "description": "P0.0 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as XIN external system clock input, I2C SCL clock, Timer 2 compare 0 output (T2COM0) and external interrupt INT1." }, { "number": "3",- "name": "P0.1/XOUT/SDA/T2COM1",+ "name": "SDA/T2COM1/XOUT/P01", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with crystal/resonator drive XOUT, I2C SDA and Timer 2 compare 1 output."+ "description": "P0.1 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as XOUT crystal/resonator drive, I2C SDA data pin and Timer 2 compare 1 output (T2COM1)." }, { "number": "4",- "name": "P0.2/LXIN/T2CC2/PWM10",+ "name": "PWM10/T2CC2/LXIN/P02", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with low clock external input LXIN, Timer 2 capture 2 input and PWM10 output."+ "description": "P0.2 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LXIN low-clock external input, Timer 2 capture 2 input (T2CC2) and PWM10 programmable PWM output." }, { "number": "5",- "name": "P0.3/LXOUT/T2CC3/PWM20",+ "name": "PWM20/T2CC3/LXOUT/P03", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with low clock crystal drive LXOUT, Timer 2 capture 3 input and PWM20 output."+ "description": "P0.3 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LXOUT low-clock crystal drive, Timer 2 capture 3 input (T2CC3) and PWM20 programmable PWM output." }, { "number": "6",- "name": "P0.4/RST/INT2",+ "name": "INT2/RST/P04", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with active-low system reset and external interrupt 2."+ "description": "P0.4 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as the active-low system reset input (RST) and external interrupt INT2." }, { "number": "7",- "name": "P0.5/T2CC0/COM0",+ "name": "T2CC0/COM0/P05", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 capture 0 input and LCD common 0 output."+ "description": "P0.5 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 capture 0 input (T2CC0) and LCD common 0 output (COM0)." }, { "number": "8",- "name": "P0.6/T2CC1/COM1",+ "name": "T2CC1/COM1/P06", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 capture 1 input and LCD common 1 output."+ "description": "P0.6 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 capture 1 input (T2CC1) and LCD common 1 output (COM1)." }, { "number": "9",- "name": "P0.7/T2COM2/COM2",+ "name": "T2COM2/COM2/P07", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 compare 2 output and LCD common 2 output."+ "description": "P0.7 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 compare 2 output (T2COM2) and LCD common 2 output (COM2)." }, { "number": "10",- "name": "P1.0/T2COM3/COM3",+ "name": "T2COM3/COM3/P10", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 compare 3 output and LCD common 3 output."+ "description": "P1.0 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 compare 3 output (T2COM3) and LCD common 3 output (COM3)." }, { "number": "11",- "name": "P1.1/SEG0/CM15",+ "name": "SEG0/CM15/P11", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 0 output and cap-sensing input channel 15."+ "description": "P1.1 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 0 output (SEG0) and cap-sensing input channel 15 (CM15)." }, { "number": "12",- "name": "P1.2/SEG1/CM14",+ "name": "SEG1/CM14/P12", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 1 output and cap-sensing input channel 14."+ "description": "P1.2 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 1 output (SEG1) and cap-sensing input channel 14 (CM14)." }, { "number": "13",- "name": "P1.3/SEG2/CM13",+ "name": "SEG2/CM13/P13", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 2 output and cap-sensing input channel 13."+ "description": "P1.3 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 2 output (SEG2) and cap-sensing input channel 13 (CM13)." }, { "number": "14",- "name": "P1.4/SEG3/CM12",+ "name": "SEG3/CM12/P14", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 3 output and cap-sensing input channel 12."+ "description": "P1.4 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 3 output (SEG3) and cap-sensing input channel 12 (CM12)." }, { "number": "15", "name": "P15/CM11/AIN12/SEG4", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 4 output, ADC input channel 12 and cap-sensing input channel 11."+ "description": "P1.5 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 4 output (SEG4), ADC input channel 12 (AIN12) and cap-sensing input channel 11 (CM11)." }, { "number": "16", "name": "P16/CM10/AIN11/SEG5", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 5 output, ADC input channel 11 and cap-sensing input channel 10."+ "description": "P1.6 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 5 output (SEG5), ADC input channel 11 (AIN11) and cap-sensing input channel 10 (CM10)." }, { "number": "17", "name": "P17/CM9/AIN10/SEG6", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 6 output, ADC input channel 10 and cap-sensing input channel 9."+ "description": "P1.7 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 6 output (SEG6), ADC input channel 10 (AIN10) and cap-sensing input channel 9 (CM9)." }, { "number": "18", "name": "P27/CM8/AIN9/SEG7/URX", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with UART reception pin, LCD segment 7 output, ADC input channel 9 and cap-sensing input channel 8."+ "description": "P2.7 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as UART receive pin (URX), LCD segment 7 output (SEG7), ADC input channel 9 (AIN9) and cap-sensing input channel 8 (CM8)." }, { "number": "19", "name": "P26/CM7/AIN8/SEG8/UTX", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with UART transmission pin, LCD segment 8 output, ADC input channel 8 and cap-sensing input channel 7."+ "description": "P2.6 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as UART transmit pin (UTX), LCD segment 8 output (SEG8), ADC input channel 8 (AIN8) and cap-sensing input channel 7 (CM7)." }, { "number": "20", "name": "P25/CM6/AIN7/SEG9/SSN", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI slave select (slave mode), LCD segment 9 output, ADC input channel 7 and cap-sensing input channel 6."+ "description": "P2.5 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI slave select pin (SSN, slave mode), LCD segment 9 output (SEG9), ADC input channel 7 (AIN7) and cap-sensing input channel 6 (CM6)." }, { "number": "21", "name": "P24/CM5/AIN6/SEG10/SCK", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI clock (output in master, input in slave), LCD segment 10 output, ADC input channel 6 and cap-sensing input channel 5."+ "description": "P2.4 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI clock pin (SCK), LCD segment 10 output (SEG10), ADC input channel 6 (AIN6) and cap-sensing input channel 5 (CM5)." }, { "number": "22", "name": "P23/CM4/AIN5/SEG11/MISO", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI MISO (reception in master, transmission in slave), LCD segment 11 output, ADC input channel 5 and cap-sensing input channel 4."+ "description": "P2.3 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI MISO pin, LCD segment 11 output (SEG11), ADC input channel 5 (AIN5) and cap-sensing input channel 4 (CM4)." }, { "number": "23", "name": "P22/CM3/AIN4/SEG12/MOSI", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI MOSI (transmission in master, reception in slave), LCD segment 12 output, ADC input channel 4 and cap-sensing input channel 3."+ "description": "P2.2 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI MOSI pin, LCD segment 12 output (SEG12), ADC input channel 4 (AIN4) and cap-sensing input channel 3 (CM3)." }, { "number": "24", "name": "P21/CM2/AIN3/SEG13/PWM21", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with PWM21 output, LCD segment 13 output, ADC input channel 3 and cap-sensing input channel 2."+ "description": "P2.1 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as PWM21 programmable PWM output, LCD segment 13 output (SEG13), ADC input channel 3 (AIN3) and cap-sensing input channel 2 (CM2)." }, { "number": "25", "name": "P20/CM1/AIN2/SEG14/PWM11", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with PWM11 output, LCD segment 14 output, ADC input channel 2 and cap-sensing input channel 1."+ "description": "P2.0 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as PWM11 programmable PWM output, LCD segment 14 output (SEG14), ADC input channel 2 (AIN2) and cap-sensing input channel 1 (CM1)." }, { "number": "26", "name": "P31/AIN1/SWAT", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with debug interface SWAT and ADC input channel 1."+ "description": "P3.1 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as the SWAT debug interface pin and ADC input channel 1 (AIN1)." }, { "number": "27", "name": "P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with external interrupt 0, PWM fail detect, LCD segment 15 output, ADC input channel 0, ADC external reference voltage (AVREFH) and cap-sensing input channel 0."+ "description": "P3.0 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as external interrupt INT0, PWM fail detect pin (PWMFL), LCD segment 15 output (SEG15), ADC input channel 0 (AIN0), external ADC high reference voltage input (AVREFH) and cap-sensing input channel 0 (CM0)." }, { "number": "28", "name": "VDD", "type": "power_in",- "description": "Power supply."+ "description": "Power supply pin for the device." } ], "provenance": {@@ -238,18 +238,18 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: SN8F5814SG is listed as SOP, 28 pins, Green package (ordering table). Pinout taken from section 4.1 ; Datasheet does not state electrical direction per pin; all GPIO pins typed bidirectional. Pin 6 (P0.",+ "extractor flagged: The datasheet extract gives no numeric supply voltage or current limits for VDD/VSS on these pages; ; The pin name is printed as INT2/RST/P04 on the pinout and the datasheet says RST is an active-low sy; All signal pins are typed bidirectional because the datasheet describes them as GPIO bidirectional p", "12/28 pins cited to the wrong page (name found elsewhere): ['16:P16/CM10/AIN11/SEG5@p10', '17:P17/CM9/AIN10/SEG6@p10', '18:P27/CM8/AIN9/SEG7/URX@p11', '19:P26/CM7/AIN8/SEG8/UTX@p11']" ], "pages_sent": 42,- "cost_usd": 0.3069,- "at": "2026-11-12T04:57:36"+ "cost_usd": 0.1679,+ "at": "2026-11-12T07:58:36" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/4b90c9df5c3ed63223b150ba229afc74.pdf",@@ -304,7 +304,7 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "5a5717f6f339bf8c06bbd69e3262bd060e7706230c739ce6b202ec926e6c30b8",+ "sha256": "1e825d7e17a7918ad2069527442d558b2b3cd6a32a7d61b1fe5b13180d428753", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+51−49@@ -4,7 +4,7 @@ "slug": "sn8f5814sg", "title": "SN8F5814SG", "brief": "SONIX Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "lcsc": "C2981273" }, "distributor_check": {- "checked_at": "2026-11-12T04:57:52Z",+ "checked_at": "2026-11-12T07:59:10Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -50,169 +50,169 @@ "number": "1", "name": "VSS", "type": "power_in",- "description": "Ground (0 V)."+ "description": "Ground reference pin (0 V) for the device." }, { "number": "2",- "name": "P0.0/XIN/SCL/T2COM0/INT1",+ "name": "SCL/T2COM0/INT1/XIN/P00", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with external clock input XIN, I2C SCL, Timer 2 compare 0 output and external interrupt 1."+ "description": "P0.0 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as XIN external system clock input, I2C SCL clock, Timer 2 compare 0 output (T2COM0) and external interrupt INT1." }, { "number": "3",- "name": "P0.1/XOUT/SDA/T2COM1",+ "name": "SDA/T2COM1/XOUT/P01", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with crystal/resonator drive XOUT, I2C SDA and Timer 2 compare 1 output."+ "description": "P0.1 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as XOUT crystal/resonator drive, I2C SDA data pin and Timer 2 compare 1 output (T2COM1)." }, { "number": "4",- "name": "P0.2/LXIN/T2CC2/PWM10",+ "name": "PWM10/T2CC2/LXIN/P02", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with low clock external input LXIN, Timer 2 capture 2 input and PWM10 output."+ "description": "P0.2 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LXIN low-clock external input, Timer 2 capture 2 input (T2CC2) and PWM10 programmable PWM output." }, { "number": "5",- "name": "P0.3/LXOUT/T2CC3/PWM20",+ "name": "PWM20/T2CC3/LXOUT/P03", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with low clock crystal drive LXOUT, Timer 2 capture 3 input and PWM20 output."+ "description": "P0.3 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LXOUT low-clock crystal drive, Timer 2 capture 3 input (T2CC3) and PWM20 programmable PWM output." }, { "number": "6",- "name": "P0.4/RST/INT2",+ "name": "INT2/RST/P04", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with active-low system reset and external interrupt 2."+ "description": "P0.4 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as the active-low system reset input (RST) and external interrupt INT2." }, { "number": "7",- "name": "P0.5/T2CC0/COM0",+ "name": "T2CC0/COM0/P05", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 capture 0 input and LCD common 0 output."+ "description": "P0.5 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 capture 0 input (T2CC0) and LCD common 0 output (COM0)." }, { "number": "8",- "name": "P0.6/T2CC1/COM1",+ "name": "T2CC1/COM1/P06", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 capture 1 input and LCD common 1 output."+ "description": "P0.6 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 capture 1 input (T2CC1) and LCD common 1 output (COM1)." }, { "number": "9",- "name": "P0.7/T2COM2/COM2",+ "name": "T2COM2/COM2/P07", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 compare 2 output and LCD common 2 output."+ "description": "P0.7 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 compare 2 output (T2COM2) and LCD common 2 output (COM2)." }, { "number": "10",- "name": "P1.0/T2COM3/COM3",+ "name": "T2COM3/COM3/P10", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with Timer 2 compare 3 output and LCD common 3 output."+ "description": "P1.0 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as Timer 2 compare 3 output (T2COM3) and LCD common 3 output (COM3)." }, { "number": "11",- "name": "P1.1/SEG0/CM15",+ "name": "SEG0/CM15/P11", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 0 output and cap-sensing input channel 15."+ "description": "P1.1 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 0 output (SEG0) and cap-sensing input channel 15 (CM15)." }, { "number": "12",- "name": "P1.2/SEG1/CM14",+ "name": "SEG1/CM14/P12", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 1 output and cap-sensing input channel 14."+ "description": "P1.2 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 1 output (SEG1) and cap-sensing input channel 14 (CM14)." }, { "number": "13",- "name": "P1.3/SEG2/CM13",+ "name": "SEG2/CM13/P13", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 2 output and cap-sensing input channel 13."+ "description": "P1.3 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 2 output (SEG2) and cap-sensing input channel 13 (CM13)." }, { "number": "14",- "name": "P1.4/SEG3/CM12",+ "name": "SEG3/CM12/P14", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 3 output and cap-sensing input channel 12."+ "description": "P1.4 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 3 output (SEG3) and cap-sensing input channel 12 (CM12)." }, { "number": "15", "name": "P15/CM11/AIN12/SEG4", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 4 output, ADC input channel 12 and cap-sensing input channel 11."+ "description": "P1.5 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 4 output (SEG4), ADC input channel 12 (AIN12) and cap-sensing input channel 11 (CM11)." }, { "number": "16", "name": "P16/CM10/AIN11/SEG5", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 5 output, ADC input channel 11 and cap-sensing input channel 10."+ "description": "P1.6 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 5 output (SEG5), ADC input channel 11 (AIN11) and cap-sensing input channel 10 (CM10)." }, { "number": "17", "name": "P17/CM9/AIN10/SEG6", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input, pull-up and level-change wake-up; shared with LCD segment 6 output, ADC input channel 10 and cap-sensing input channel 9."+ "description": "P1.7 is a GPIO with Schmitt-trigger input, built-in pull-up and level-change wake-up, also serving as LCD segment 6 output (SEG6), ADC input channel 10 (AIN10) and cap-sensing input channel 9 (CM9)." }, { "number": "18", "name": "P27/CM8/AIN9/SEG7/URX", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with UART reception pin, LCD segment 7 output, ADC input channel 9 and cap-sensing input channel 8."+ "description": "P2.7 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as UART receive pin (URX), LCD segment 7 output (SEG7), ADC input channel 9 (AIN9) and cap-sensing input channel 8 (CM8)." }, { "number": "19", "name": "P26/CM7/AIN8/SEG8/UTX", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with UART transmission pin, LCD segment 8 output, ADC input channel 8 and cap-sensing input channel 7."+ "description": "P2.6 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as UART transmit pin (UTX), LCD segment 8 output (SEG8), ADC input channel 8 (AIN8) and cap-sensing input channel 7 (CM7)." }, { "number": "20", "name": "P25/CM6/AIN7/SEG9/SSN", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI slave select (slave mode), LCD segment 9 output, ADC input channel 7 and cap-sensing input channel 6."+ "description": "P2.5 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI slave select pin (SSN, slave mode), LCD segment 9 output (SEG9), ADC input channel 7 (AIN7) and cap-sensing input channel 6 (CM6)." }, { "number": "21", "name": "P24/CM5/AIN6/SEG10/SCK", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI clock (output in master, input in slave), LCD segment 10 output, ADC input channel 6 and cap-sensing input channel 5."+ "description": "P2.4 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI clock pin (SCK), LCD segment 10 output (SEG10), ADC input channel 6 (AIN6) and cap-sensing input channel 5 (CM5)." }, { "number": "22", "name": "P23/CM4/AIN5/SEG11/MISO", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI MISO (reception in master, transmission in slave), LCD segment 11 output, ADC input channel 5 and cap-sensing input channel 4."+ "description": "P2.3 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI MISO pin, LCD segment 11 output (SEG11), ADC input channel 5 (AIN5) and cap-sensing input channel 4 (CM4)." }, { "number": "23", "name": "P22/CM3/AIN4/SEG12/MOSI", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with SPI MOSI (transmission in master, reception in slave), LCD segment 12 output, ADC input channel 4 and cap-sensing input channel 3."+ "description": "P2.2 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as SPI MOSI pin, LCD segment 12 output (SEG12), ADC input channel 4 (AIN4) and cap-sensing input channel 3 (CM3)." }, { "number": "24", "name": "P21/CM2/AIN3/SEG13/PWM21", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with PWM21 output, LCD segment 13 output, ADC input channel 3 and cap-sensing input channel 2."+ "description": "P2.1 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as PWM21 programmable PWM output, LCD segment 13 output (SEG13), ADC input channel 3 (AIN3) and cap-sensing input channel 2 (CM2)." }, { "number": "25", "name": "P20/CM1/AIN2/SEG14/PWM11", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with PWM11 output, LCD segment 14 output, ADC input channel 2 and cap-sensing input channel 1."+ "description": "P2.0 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as PWM11 programmable PWM output, LCD segment 14 output (SEG14), ADC input channel 2 (AIN2) and cap-sensing input channel 1 (CM1)." }, { "number": "26", "name": "P31/AIN1/SWAT", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with debug interface SWAT and ADC input channel 1."+ "description": "P3.1 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as the SWAT debug interface pin and ADC input channel 1 (AIN1)." }, { "number": "27", "name": "P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL", "type": "bidirectional",- "description": "GPIO with Schmitt-trigger input and pull-up; shared with external interrupt 0, PWM fail detect, LCD segment 15 output, ADC input channel 0, ADC external reference voltage (AVREFH) and cap-sensing input channel 0."+ "description": "P3.0 is a GPIO with Schmitt-trigger input and built-in pull-up, also serving as external interrupt INT0, PWM fail detect pin (PWMFL), LCD segment 15 output (SEG15), ADC input channel 0 (AIN0), external ADC high reference voltage input (AVREFH) and cap-sensing input channel 0 (CM0)." }, { "number": "28", "name": "VDD", "type": "power_in",- "description": "Power supply."+ "description": "Power supply pin for the device." } ], "provenance": {@@ -220,18 +220,18 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: SN8F5814SG is listed as SOP, 28 pins, Green package (ordering table). Pinout taken from section 4.1 ; Datasheet does not state electrical direction per pin; all GPIO pins typed bidirectional. Pin 6 (P0.",+ "extractor flagged: The datasheet extract gives no numeric supply voltage or current limits for VDD/VSS on these pages; ; The pin name is printed as INT2/RST/P04 on the pinout and the datasheet says RST is an active-low sy; All signal pins are typed bidirectional because the datasheet describes them as GPIO bidirectional p", "12/28 pins cited to the wrong page (name found elsewhere): ['16:P16/CM10/AIN11/SEG5@p10', '17:P17/CM9/AIN10/SEG6@p10', '18:P27/CM8/AIN9/SEG7/URX@p11', '19:P26/CM7/AIN8/SEG8/UTX@p11']" ], "pages_sent": 42,- "cost_usd": 0.3069,- "at": "2026-11-12T04:57:36"+ "cost_usd": 0.1679,+ "at": "2026-11-12T07:58:36" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/4b90c9df5c3ed63223b150ba229afc74.pdf",@@ -286,7 +286,7 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "5a5717f6f339bf8c06bbd69e3262bd060e7706230c739ce6b202ec926e6c30b8",+ "sha256": "1e825d7e17a7918ad2069527442d558b2b3cd6a32a7d61b1fe5b13180d428753", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -980,5 +980,7 @@ ], "visibility": { "public": true- }+ },+ "description": "SONIX Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
sn8f5814sg-hero.glb⋯ 1 unchanged line ⋯
sn8f5814sg-hero.overlay.json+14−14@@ -74,7 +74,7 @@ "footprint": "sn8f5814sg.kicad_mod", "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519", "pins": "page.json component.pins",- "pins_sha256": "6026e04292f2ee87b34be092143a31fb69e5c23954b0f8134c3594edaabaf2a5"+ "pins_sha256": "07fd09c98fcc399dc0f73ee32d3dfb3ec6ab9fbfdbede09d6d7cb8e29ff2c150" }, "generator": "adom-wiki 1.8.22 (component_hero)", "labels": [@@ -89,7 +89,7 @@ }, { "pad": "2",- "text": "P0.0/XIN/SCL/T2COM0/INT1",+ "text": "SCL/T2COM0/INT1/XIN/P00", "x": -5.825, "y": -6.985, "align": "right",@@ -98,7 +98,7 @@ }, { "pad": "3",- "text": "P0.1/XOUT/SDA/T2COM1",+ "text": "SDA/T2COM1/XOUT/P01", "x": -5.825, "y": -5.715, "align": "right",@@ -107,7 +107,7 @@ }, { "pad": "4",- "text": "P0.2/LXIN/T2CC2/PWM10",+ "text": "PWM10/T2CC2/LXIN/P02", "x": -5.825, "y": -4.445, "align": "right",@@ -116,7 +116,7 @@ }, { "pad": "5",- "text": "P0.3/LXOUT/T2CC3/PWM20",+ "text": "PWM20/T2CC3/LXOUT/P03", "x": -5.825, "y": -3.175, "align": "right",@@ -125,7 +125,7 @@ }, { "pad": "6",- "text": "P0.4/RST/INT2",+ "text": "INT2/RST/P04", "x": -5.825, "y": -1.905, "align": "right",@@ -134,7 +134,7 @@ }, { "pad": "7",- "text": "P0.5/T2CC0/COM0",+ "text": "T2CC0/COM0/P05", "x": -5.825, "y": -0.635, "align": "right",@@ -143,7 +143,7 @@ }, { "pad": "8",- "text": "P0.6/T2CC1/COM1",+ "text": "T2CC1/COM1/P06", "x": -5.825, "y": 0.635, "align": "right",@@ -152,7 +152,7 @@ }, { "pad": "9",- "text": "P0.7/T2COM2/COM2",+ "text": "T2COM2/COM2/P07", "x": -5.825, "y": 1.905, "align": "right",@@ -161,7 +161,7 @@ }, { "pad": "10",- "text": "P1.0/T2COM3/COM3",+ "text": "T2COM3/COM3/P10", "x": -5.825, "y": 3.175, "align": "right",@@ -170,7 +170,7 @@ }, { "pad": "11",- "text": "P1.1/SEG0/CM15",+ "text": "SEG0/CM15/P11", "x": -5.825, "y": 4.445, "align": "right",@@ -179,7 +179,7 @@ }, { "pad": "12",- "text": "P1.2/SEG1/CM14",+ "text": "SEG1/CM14/P12", "x": -5.825, "y": 5.715, "align": "right",@@ -188,7 +188,7 @@ }, { "pad": "13",- "text": "P1.3/SEG2/CM13",+ "text": "SEG2/CM13/P13", "x": -5.825, "y": 6.985, "align": "right",@@ -197,7 +197,7 @@ }, { "pad": "14",- "text": "P1.4/SEG3/CM12",+ "text": "SEG3/CM12/P14", "x": -5.825, "y": 8.255, "align": "right",
sn8f5814sg.kicad_sym+13−13@@ -13,55 +13,55 @@ (number "1" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 12.70 0) (length 5.08)- (name "P0.0/XIN/SCL/T2COM0/INT1" (effects (font (size 1.27 1.27))))+ (name "SCL/T2COM0/INT1/XIN/P00" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 10.16 0) (length 5.08)- (name "P0.1/XOUT/SDA/T2COM1" (effects (font (size 1.27 1.27))))+ (name "SDA/T2COM1/XOUT/P01" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 7.62 0) (length 5.08)- (name "P0.2/LXIN/T2CC2/PWM10" (effects (font (size 1.27 1.27))))+ (name "PWM10/T2CC2/LXIN/P02" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 5.08 0) (length 5.08)- (name "P0.3/LXOUT/T2CC3/PWM20" (effects (font (size 1.27 1.27))))+ (name "PWM20/T2CC3/LXOUT/P03" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 2.54 0) (length 5.08)- (name "P0.4/RST/INT2" (effects (font (size 1.27 1.27))))+ (name "INT2/RST/P04" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 0.00 0) (length 5.08)- (name "P0.5/T2CC0/COM0" (effects (font (size 1.27 1.27))))+ (name "T2CC0/COM0/P05" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -2.54 0) (length 5.08)- (name "P0.6/T2CC1/COM1" (effects (font (size 1.27 1.27))))+ (name "T2CC1/COM1/P06" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -5.08 0) (length 5.08)- (name "P0.7/T2COM2/COM2" (effects (font (size 1.27 1.27))))+ (name "T2COM2/COM2/P07" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -7.62 0) (length 5.08)- (name "P1.0/T2COM3/COM3" (effects (font (size 1.27 1.27))))+ (name "T2COM3/COM3/P10" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -10.16 0) (length 5.08)- (name "P1.1/SEG0/CM15" (effects (font (size 1.27 1.27))))+ (name "SEG0/CM15/P11" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -12.70 0) (length 5.08)- (name "P1.2/SEG1/CM14" (effects (font (size 1.27 1.27))))+ (name "SEG1/CM14/P12" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -15.24 0) (length 5.08)- (name "P1.3/SEG2/CM13" (effects (font (size 1.27 1.27))))+ (name "SEG2/CM13/P13" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27)))) ) (pin bidirectional line (at -43.18 -17.78 0) (length 5.08)- (name "P1.4/SEG3/CM12" (effects (font (size 1.27 1.27))))+ (name "SEG3/CM12/P14" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27)))) ) (pin power_in line (at 43.18 15.24 180) (length 5.08)
sn8f5814sg.lbr+26−26@@ -114,19 +114,19 @@ <text x="0.0000" y="20.3200" size="1.27" layer="95" align="center">>NAME</text> <text x="0.0000" y="-22.8600" size="1.27" layer="96" align="center">>VALUE</text> <pin name="VSS" x="-43.18" y="15.24" length="middle" direction="pwr"/>- <pin name="P0.0/XIN/SCL/T2COM0/INT1" x="-43.18" y="12.7" length="middle" direction="io"/>- <pin name="P0.1/XOUT/SDA/T2COM1" x="-43.18" y="10.16" length="middle" direction="io"/>- <pin name="P0.2/LXIN/T2CC2/PWM10" x="-43.18" y="7.62" length="middle" direction="io"/>- <pin name="P0.3/LXOUT/T2CC3/PWM20" x="-43.18" y="5.08" length="middle" direction="io"/>- <pin name="P0.4/RST/INT2" x="-43.18" y="2.54" length="middle" direction="io"/>- <pin name="P0.5/T2CC0/COM0" x="-43.18" y="0" length="middle" direction="io"/>- <pin name="P0.6/T2CC1/COM1" x="-43.18" y="-2.54" length="middle" direction="io"/>- <pin name="P0.7/T2COM2/COM2" x="-43.18" y="-5.08" length="middle" direction="io"/>- <pin name="P1.0/T2COM3/COM3" x="-43.18" y="-7.62" length="middle" direction="io"/>- <pin name="P1.1/SEG0/CM15" x="-43.18" y="-10.16" length="middle" direction="io"/>- <pin name="P1.2/SEG1/CM14" x="-43.18" y="-12.7" length="middle" direction="io"/>- <pin name="P1.3/SEG2/CM13" x="-43.18" y="-15.24" length="middle" direction="io"/>- <pin name="P1.4/SEG3/CM12" x="-43.18" y="-17.78" length="middle" direction="io"/>+ <pin name="SCL/T2COM0/INT1/XIN/P00" x="-43.18" y="12.7" length="middle" direction="io"/>+ <pin name="SDA/T2COM1/XOUT/P01" x="-43.18" y="10.16" length="middle" direction="io"/>+ <pin name="PWM10/T2CC2/LXIN/P02" x="-43.18" y="7.62" length="middle" direction="io"/>+ <pin name="PWM20/T2CC3/LXOUT/P03" x="-43.18" y="5.08" length="middle" direction="io"/>+ <pin name="INT2/RST/P04" x="-43.18" y="2.54" length="middle" direction="io"/>+ <pin name="T2CC0/COM0/P05" x="-43.18" y="0" length="middle" direction="io"/>+ <pin name="T2CC1/COM1/P06" x="-43.18" y="-2.54" length="middle" direction="io"/>+ <pin name="T2COM2/COM2/P07" x="-43.18" y="-5.08" length="middle" direction="io"/>+ <pin name="T2COM3/COM3/P10" x="-43.18" y="-7.62" length="middle" direction="io"/>+ <pin name="SEG0/CM15/P11" x="-43.18" y="-10.16" length="middle" direction="io"/>+ <pin name="SEG1/CM14/P12" x="-43.18" y="-12.7" length="middle" direction="io"/>+ <pin name="SEG2/CM13/P13" x="-43.18" y="-15.24" length="middle" direction="io"/>+ <pin name="SEG3/CM12/P14" x="-43.18" y="-17.78" length="middle" direction="io"/> <pin name="VDD" x="43.18" y="15.24" length="middle" direction="pwr" rot="R180"/> <pin name="P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL" x="43.18" y="12.7" length="middle" direction="io" rot="R180"/> <pin name="P31/AIN1/SWAT" x="43.18" y="10.16" length="middle" direction="io" rot="R180"/>@@ -153,19 +153,19 @@ <device name="" package="SOIC-28W_7.5x17.9mm_P1.27mm"> <connects> <connect gate="G$1" pin="VSS" pad="1"/>- <connect gate="G$1" pin="P0.0/XIN/SCL/T2COM0/INT1" pad="2"/>- <connect gate="G$1" pin="P0.1/XOUT/SDA/T2COM1" pad="3"/>- <connect gate="G$1" pin="P0.2/LXIN/T2CC2/PWM10" pad="4"/>- <connect gate="G$1" pin="P0.3/LXOUT/T2CC3/PWM20" pad="5"/>- <connect gate="G$1" pin="P0.4/RST/INT2" pad="6"/>- <connect gate="G$1" pin="P0.5/T2CC0/COM0" pad="7"/>- <connect gate="G$1" pin="P0.6/T2CC1/COM1" pad="8"/>- <connect gate="G$1" pin="P0.7/T2COM2/COM2" pad="9"/>- <connect gate="G$1" pin="P1.0/T2COM3/COM3" pad="10"/>- <connect gate="G$1" pin="P1.1/SEG0/CM15" pad="11"/>- <connect gate="G$1" pin="P1.2/SEG1/CM14" pad="12"/>- <connect gate="G$1" pin="P1.3/SEG2/CM13" pad="13"/>- <connect gate="G$1" pin="P1.4/SEG3/CM12" pad="14"/>+ <connect gate="G$1" pin="SCL/T2COM0/INT1/XIN/P00" pad="2"/>+ <connect gate="G$1" pin="SDA/T2COM1/XOUT/P01" pad="3"/>+ <connect gate="G$1" pin="PWM10/T2CC2/LXIN/P02" pad="4"/>+ <connect gate="G$1" pin="PWM20/T2CC3/LXOUT/P03" pad="5"/>+ <connect gate="G$1" pin="INT2/RST/P04" pad="6"/>+ <connect gate="G$1" pin="T2CC0/COM0/P05" pad="7"/>+ <connect gate="G$1" pin="T2CC1/COM1/P06" pad="8"/>+ <connect gate="G$1" pin="T2COM2/COM2/P07" pad="9"/>+ <connect gate="G$1" pin="T2COM3/COM3/P10" pad="10"/>+ <connect gate="G$1" pin="SEG0/CM15/P11" pad="11"/>+ <connect gate="G$1" pin="SEG1/CM14/P12" pad="12"/>+ <connect gate="G$1" pin="SEG2/CM13/P13" pad="13"/>+ <connect gate="G$1" pin="SEG3/CM12/P14" pad="14"/> <connect gate="G$1" pin="VDD" pad="28"/> <connect gate="G$1" pin="P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL" pad="27"/> <connect gate="G$1" pin="P31/AIN1/SWAT" pad="26"/>